CCcam.cfg File Missing On Dreambox

[tariqz118]

hey everyone i have the gemini image and cccam installed and running on my dreambox. i am trying to find the CCcam.cfg in the var directory on flashfxp but it is not there? where can i get it from? help please!!!!!

[Curious123]

CCcam.cfg file is normally found in the var/etc folder.

[Manic01]

Depends if you loaded cccam full or bin.

[tariqz118]

All Done Cheers!!!

[neo1]

can anyone give me a little info on cccaminfophp and where i can get it from and the best one the only 1 i can get has a password any info would help thanks.

[father ted]

can anyone give me a little info on cccaminfophp and where i can get it from and the best one the only 1 i can get has a password any info would help thanks.

if you have the pli image its in their download same place you get your cccam file it should be on their server

[neo1]

i have nabilosat v.08 would it be in theres

[Curious123]

i have nabilosat v.08 would it be in theres

Go into their 'Addons' and download it from their server.

[snagga]

All Done Cheers!!!

Help please!!!


I loaded full Gemini 470 DM500s NO bomb, but missing CCcam.cfg file which is normally found in the var/etc folder.



:giveup:

[father ted]

Help please!!!


I loaded full Gemini 470 DM500s NO bomb, but missing CCcam.cfg file which is normally found in the var/etc folder.



:giveup:

you have to download it from the addons on the gemini server m8 when you flash a box these files are not included you have to do them yourself

[westkill]

you need to download it from there server through the blue button via the addons on there image

[snagga]

you have to download it from the addons on the gemini server m8 when you flash a box these files are not included you have to do them yourself

Thanks......But I did downloaded CCCAM 2.14 from the addons. CCCAM starting up with dreambox ok. When I look in the var/etc folder, no CCcam.cfg file present. I have reflashed box several times now, but still no joy......

[Adam_UK]

If you sure cccam is installed and starts up when box starts then can you not create the file and put your clines in it?

[Bulld0g]

If it's starting up m8 it's got to be there

[Curious123]

If you cannot find CCcam.cfg even after you have downloaded CCcam 2.14 from their server then there has to be something wrong. I would flash it with the Pli Jade 3 and download CCcam 2.14 from their server and use that as this always worked on my dm500.

[humayoun]

thank you very much

[snagga]

Help please!!!


I loaded full Gemini 470 DM500s NO bomb, but missing CCcam.cfg file which is normally found in the var/etc folder.



:giveup:

Thanks all. Still could not find cccam.cfg after several reflashes. I just loaded file manually via dcc and all working ok...

:bounce:

[Joe86]

Thanks all. Still could not find cccam.cfg after several reflashes. I just loaded file manually via dcc and all working ok...

:bounce:

Which example file did you use?

I too have this problem, as I installed it on my DM800 HD and no matter how many times I installed or uninstalled, and used 3 different versions of Cccam, blue button, and even manual install I couldn't get a CFG file to appear. Maybe you might be able to tell me which example file you used, as I'm unsure on where to find a good one.


Thanks :)

[southpaw]

You can drag an drop your own in etc if you have one on PC. Or look for cfg/ config from your download panel on Dm
Tspanel has it in

[Joe86]

You can drag an drop your own in etc if you have one on PC. Or look for cfg/ config from your download panel on Dm
Tspanel has it in

Thanks. I think TS Panel is an optional addon, as I couldn't find it anywhere.

I have a CFG file from 2.1.4 so I will DCC that over. Cheers!

CCCam is definitely working, as I just disabled it in the CAM manager, and lost all the SKY channels I had working (just need the boxkey and cfg for the movies and sports). Thanks for your guide on that part, I will take a look when I have copied the CFG.

Cheers

[alotmentman]

sorry to jump in on conservation //the 2.1.4.ccam when downloaded through addons does that go into etc file once downloaded ////how do you open the file //for clines //etc all help appreciated thanks

[teds]

var // etc // right click config file and the click edit. delete whats in there then put cline in click save and your done

[wannaknow]

Help please!!!


I loaded full Gemini 470 DM500s NO bomb, but missing CCcam.cfg file which is normally found in the var/etc folder.



:giveup:

Try under var/bin folder. That is where mine was situated on Pli Jade 3

[sadik2012]

hi mates!!!
i have dreambox dm 500, i setup flash image gemini 4.70 and the problem is that when i start the box it shows only the gemini image for a few seconds and i lose the picture...
any help please

[Adeexy]

Hi

I have been flashing my dm800hd but I cant seem to find a compatible image I got an oozon image with no cccam cfg i tried to install manually but no luck.

any advice please///

[andy91]

Hi

I have been flashing my dm800hd but I cant seem to find a compatible image I got an oozon image with no cccam cfg i tried to install manually but no luck.

any advice please///

Put Dreamelite Phoenix Edition on it or add Ts panel you will get what you need off there.

http://www.digital-kaos.co.uk/forums/downloads/images/2/sim201-ss82-dreamelite-133dv3-dm800-13052011-phoen-2411/

http://www.digital-kaos.co.uk/forums/downloads/other/8/ts_panel-v6-8-2460/

Andy.

[JerryCot]

I have a DM800HDPVR clone with a Nemesis 2.3 img. Would like to install CCam. I have done that numerous times in the past using my old DM-7000S, but can't do it with the latest STP. I found this thread, but do not have privileges to download TSPanel.
How does one achieve such privileges, I wonder?

Edit: by posting, I guess, since I was able to download it. However, the file from /tmp doesn't seem to work.
Back to the drawing table...

This is my first posting here, so please be patient with an old fool asking self-evident questions ;-)

BR,
JerryCot
Scandinavia

[andy91]

I have a DM800HDPVR clone with a Nemesis 2.3 img. Would like to install CCam. I have done that numerous times in the past using my old DM-7000S, but can't do it with the latest STP. I found this thread, but do not have privileges to download TSPanel.
How does one achieve such privileges, I wonder?

Edit: by posting, I guess, since I was able to download it. However, the file from /tmp doesn't seem to work.
Back to the drawing table...

This is my first posting here, so please be patient with an old fool asking self-evident questions ;-)

BR,
JerryCot
Scandinavia

Ts panel only works on certain images something to do with the kernel.
You could try the image in my earlier post.
Also tspanel is built into the plugins of some images like new enigma 2 by sat4fun bl 84.

Andy.

[jezreel]

Hi All, I have a similar problem. Just reflashed my DM500S with Nabilost using Dreamup. Run through the set up procedure when connected to my TV, checked my IP address in 'Expert Setup' and then used DCC to conect to the Dreambox, so far so good. Tried to find the Ccam.cfg file under var, but nothing there?? Back to the Dreambox, press the yellow button twice to initiate the 'Addons download manager' select 'Nabilo Image Cams' and the screen displays.... 'Sorry, connection to server refused'??? i'm lost. I have carried out this procedure before with the results I expect, Any help would be greatly appreciated.

[John Dough]

Anyone having problems connecting to their box getting a "10057" error on a clone box belonging to a mate. Used both crossover cable and modem.

Is it possible the seller has changed the password?? Tnx

[.: JaCkPoT :.]

Anyone having problems connecting to their box getting a "10057" error on a clone box belonging to a mate. Used both crossover cable and modem.

Is it possible the seller has changed the password?? Tnx

Completely irrelevant to this ancient thread. Post a new and relavent thread with more details such as receiver model and maybe someone can help