Kangoo 1.9 dti bosch

[kobelco]

Hello everyone
I need immo off and pinout.
Renault Kangoo 1.9 DTI 2002.
ECU Bosch 0281010502
I found the forum, this dump (by Maaxxyy), but I can not test it on the bench because they do not have the pinout.
Thanks to all
Greetings

[kobelco]

My dump from 24c04

[spens]

NO NEED EMULATOR JUST THIS DUMP

Regards

[kobelco]

Spens thanks for your time, you must cut line immo?
thanks
Regards

[maregiljr]

this file is good for every kango how this?

[myllenyum]

Easiest way : change original 24c04 to microchip 24lc04, and connect pin 7 (wp) to pin 8 (vcc). This way ecu doesn't write back in eeprom changed data.

[marcoco]

Hi i have the same ecu on kangoo 0281010502 with 24c04.

As i have understand i have to write the "24c04 KangooImmo OFF.bin" by Spens on 24c04WP .Solder on ecu,lift pin 7 (wp)and connect with pin 8 (vcc)
Than plug in the car.

Is it thrue?

[bursuc]

@marcoco, that is true :) it works ;)

[marcoco]

File of kobelco (http://www.digital-kaos.co.uk/forums/members/104360-kobelco/) and spens (http://www.digital-kaos.co.uk/forums/members/78514-spens/) are different.Which is the right file?

[bursuc]

i don't know m8 , probably you need to try them both.
Post result and let us know

Good Luck

[djamelEZS]

using immoff dti + cut line 59 + desoldring pin 7 from eeprom conect it on +5v tested 1000000%

[haingoben]

eep must change in 24wp04/cut immo line 15 (ecu with 2 plug)/lift 7 and joing with pin 8 eep

[Griunvaldas]

The only and really good way to solve this ECU - install emulator. ECU type is EDC15VM+ , you must make ECU virgin, fill eeprom 24c04 174-177 and 1B7-1BA with FF FF FF FF. Also don't forget to cut immo line 15. All other solutions failed to me (car starts for one time only). Also you must remove flashing immo light in dashboard.
P.S. all 24c04 series eeprom have WP function on PIN7.