sagem SL 96 decode

[rog3rio]

peugeot 306 1.4 gasoline sagem SL 96 decode
any solution for decode this ecu?
sagem sl96-9
psa 9632520280
sl96
21649399-3
ind.mod.:_e
9307 406089
i see in ecu tms 374 and 29f010a

[autorisp]

It 'easy to do.
You need a cable with a resistance of 100 ohms in series.
Connect one end of the cable to ground.
Connect the other end of the cable to pin 22 of flash and turn on the key ( Key ON state ) .
5 seconds after disconnecting the cable and you should hear the stepper motor that moves .
If not, redo the operation to pin 24.
In this way we causes to microprocessor a 'Bus Error' which erases the EEPROM inside the micro and (on this ECU) the reset of 'im * o.

[rog3rio]

It 'easy to do.
You need a cable with a resistance of 100 ohms in series.
Connect one end of the cable to ground.
Connect the other end of the cable to pin 22 of flash and turn on the key ( Key ON state ) .
5 seconds after disconnecting the cable and you should hear the stepper motor that moves .
If not, redo the operation to pin 24.
In this way we causes to microprocessor a 'Bus Error' which erases the EEPROM inside the micro and (on this ECU) the reset of 'im * o.
problem solved,but in pin 23 .

[deneo]

is this all u do i have a sl96-9 on a belingo van and have been on with it for 4 months the tax is just about out os did it work thanks dene

[ROBERTby2000]

It 'easy to do.
You need a cable with a resistance of 100 ohms in series.
Connect one end of the cable to ground.
Connect the other end of the cable to pin 22 of flash and turn on the key ( Key ON state ) .
5 seconds after disconnecting the cable and you should hear the stepper motor that moves .
If not, redo the operation to pin 24.
In this way we causes to microprocessor a 'Bus Error' which erases the EEPROM inside the micro and (on this ECU) the reset of 'im * o.

is the same with sl96-1 Peugeot 406?

thanks

[Mezz_cro]

i can t download pdf or pic :(

[Mezz_cro]

I have SL96 and inside is 29F010,i try to connect on the pin22 but there is nothing happen,i try to scroll from the minimum to the maximum but nothing.... :(
so i don t know what to do now :(

[kautuvera]

can you help me the X-PROG how to win or do I connect to tms 374 my wires

[MSolen]

I have SL96 and inside is 29F010,i try to connect on the pin22 but there is nothing happen,i try to scroll from the minimum to the maximum but nothing.... :(
so i don t know what to do now :(


You are giving GND through 100 Ohm on:
22pin flash memory - if you have inside 28F256
23pin flash memory - if you have inside 29F010

[ggff]

thanks a lot

[Onwuka williams]

thanks a lot

you just read the flash and then repiar whith immokiller
and the car will start if not that means your car has another
problem thn scan and see:bandit:

[Nabil1987]

You are giving GND through 100 Ohm on:
22pin flash memory - if you have inside 28F256
23pin flash memory - if you have inside 29F010


i test this method in many cars never work for me!!!
finaly i use the clock file.

[CIRCUIT.FR]

HI

I have version SL96-4 with AT29C512
How i can immo off this?

Thanks

[magdex]

I have the same problem ! 27C512 No one solution work !

[maaxxyy]

i test this method in many cars never work for me!!!
finaly i use the clock file.


Is the clock file for the tms or 29f010? If so could you supply a clock file? Thanks

[simic82]

I tested your solutin work!!!!
thanks autorisp!!!!!

[javiercj]

It 'easy to do.
You need a cable with a resistance of 100 ohms in series.
Connect one end of the cable to ground.
Connect the other end of the cable to pin 22 of flash and turn on the key ( Key ON state ) .
5 seconds after disconnecting the cable and you should hear the stepper motor that moves .
If not, redo the operation to pin 24.
In this way we causes to microprocessor a 'Bus Error' which erases the EEPROM inside the micro and (on this ECU) the reset of 'im * o.

hello friends


please


i need to make immo off in car peugeot 406 1.8 petrol with ecu sagem sl96-1 9630650880


it has eeprom-plcc 28f256


plase to make immo off test in these ecu without car.


i need solution tested


pin-out uce


35,13 batery +


36,54 batery -


9 light chek


7 light pump


please i need help


How can I check that this immo cancelled correctly?


thanks

[samurai1991]

guys i have a SL96 - 3 ecu, car says electronic ignition fault. any leads where might be the problem

[Rojas2109]

Hi samurai1991. Have you checked the coil drivers? I could tell you where these are. looking from the side of the connector, 20mm from the right side and 50mm from the bottom, is one of them, the other at 72mm from the bottom.

[alexeybulatow]

I do immo off on all the blocks where tms is installed as follows. either close the flesh address legs with each other, or put them on the ground for a short time through the load

[gmarvin]

Will try on a Int Mod D.