Help Bosch Esi

[Liteace]

Hi All after major PC failure I am having to load everything again, Im having LARGE problem installing Esi, I installed no problem then when I go into the program and click on description it asks for dvd 1 I load that to a virtual drive and then clcik on OK and nothing happens. I think I mucked up when I installed it the 1st time, ive remeoved it and installed again and it still does the same, is there anyway I can get all traces of it deleted so I can do a fresh install and try again cause it doing my ~~~~~~~~ing head in as ive only been trying for 2 days to get it working
HELP

[steppenwolf]

It happened to me once. I used hard approach and format the disc. It seems like the ESI always have some traces left. I also think that you made a mistake during your first installation. When you run ESI after good installation it should not be asking you for disc to insert.

[Liteace]

I cant be doing a disk format, I have just spent 3 days loading everything again, there must be a way to get rid of whats causing the problem

[steppenwolf]

OK then. Maybe you should take some of specialized uninstall software to remove the ESI. Also run regedit and clean all the stuff concerning the ESI Tronic.

[steppenwolf]

Also when you run fully configurable installation and copy everything from DVD`s it should not ask you to insert DVD when you use the program. How did you installed ESI?

[Liteace]

I loaded dvd1 to a virtual drive and run setup

[steppenwolf]

I loaded dvd1 to a virtual drive and run setup

OK I know that :) but did you choose Fully Configurable Installation? Then check all the options given and then drag them and copy to your HDD?

[Liteace]

OK I know that :) but did you choose Fully Configurable Installation? Then check all the options given and then drag them and copy to your HDD?

yep sure did ?

[Liteace]

Ive just gone to registry editor, and typed in search and its found:

c:\Programme\bosch\ESItronic\AtlAW.dll

but when I delete it and search again its back again ?

[steppenwolf]

If you have done all like that than I don't know why is it asking you to insert DVD1... Sorry mate. Was just trying to help.

[Liteace]

If you have done all like that than I don't know why is it asking you to insert DVD1... Sorry mate. Was just trying to help.

I do appreciate your help, Thanks

[Patrian]

Simply and because you installed 4th Quarter 2010 (Right??? :) ), you need to wait to took and the NEW Update U1 DVD..... ;)

Regards!

[Liteace]

Simply and because you installed 4th Quarter 2010 (Right??? :) ), you need to wait to took and the NEW Update U1 DVD..... ;)

Regards!

Thanks Mate, I idea how long that will be ?

[cars]

If you open with wordpad the Win.ini file in the Windows directory, there are two entries for Esitronic:
FSC2= ID
patch = with the installation path.
you remove these entries and try new installation.

[Liteace]

If you open with wordpad the Win.ini file in the Windows directory, there are two entries for Esitronic:
FSC2= ID
patch = with the installation path.
you remove these entries and try new installation.


Thanks for that can you give me a little more "how to" info please

Thanks Again

[Liteace]

Ive got this in me win.ini file :

; for 16-bit app support
[fonts]
[extensions]
[mci extensions]
[files]
[Mail]
MAPI=1
CMC=1
CMCDLLNAME=mapi.dll
CMCDLLNAME32=mapi32.dll
MAPIX=1
MAPIXVER=1.0.0.1
OLEMessaging=1
[MCI Extensions.BAK]
aif=MPEGVideo
aifc=MPEGVideo
aiff=MPEGVideo
asf=MPEGVideo
asx=MPEGVideo
au=MPEGVideo
m1v=MPEGVideo
m3u=MPEGVideo
mp2=MPEGVideo
mp2v=MPEGVideo
mp3=MPEGVideo
mpa=MPEGVideo
mpe=MPEGVideo
mpeg=MPEGVideo
mpg=MPEGVideo
mpv2=MPEGVideo
snd=MPEGVideo
wax=MPEGVideo
wm=MPEGVideo
wma=MPEGVideo
wmv=MPEGVideo
wmx=MPEGVideo
wpl=MPEGVideo
wvx=MPEGVideo
[ESIWIN INSTALL]
AUTODATAPATH=C:\ADCDA2
CUSTNAME1=
CUSTNAME2=
CUSTSTREET=
CUSTZIP=
CUSTCITY=
CUSTCOUNTRY=
CUSTWHO=
CUSTID=
CUSTPHONE=
CUSTFAX=
CUSTEMAIL=

cant find the other 2 ?

[cars]

Thanks for that can you give me a little more "how to" info please

Thanks Again

If you have Windows XP as the operating system, then you go into the folder c: \ windows and look for the Win.ini file and click on it. This will open the contents of the file, which covers the basic configurations of Windows XP, if you scroll all the items you should find three related esitronic (see the appendix) must cancel. Remember that one of these entries contains the key ID to enable ESI.
Council make a copy of the file first, just in case.

[cars]

Sorry I had not seen your last message. this is the entire contents of the win.ini file I try to delete only the string "[ESIWIN INSTALL]."

[Liteace]

Sorry I had not seen your last message. this is the entire contents of the win.ini file I try to delete only the string "[ESIWIN INSTALL]."

I deleted the [ESIWIN INSTALL] reloaded the Esi and am still having the same problem ?

[Larue]

Have You tried to use another Virtual disc program?

[Liteace]

Have You tried to use another Virtual disc program?

No, Ive always use this one and install all me prog with it no. I think is cause i ~~~~~ed up the 1st install

[Larue]

No, Ive always use this one and install all me prog with it no. I think is cause i ~~~~~ed up the 1st install
For me this seems like virtual drive just can't recognize disk changes. Just try another one.
I'm using Magic ISO and Ultra ISO virtual disc programs, but there are loads of them on the internet.

[teuton]

Hi Liteace,


although to late in this case, in the future u might wanna use a program like the one i added. It's ashampoo uninstaller4 and it allows you to wipe out any trace of programs you don't want/need anymore.So you can play around with trial version etc without messing up. There's al handy description with it....
And don't get to lazy to run it after a while when installing new soft.

HTH, J?rgen

[cars]

You have tried to copy the entire contents dvd virtual over hard disk in a folder and try running setup from there, I had a problem silmile using a virtual machine.

[Liteace]

Thanks guys Ive done it and its working, problem was I started this major re-load, not just ESi, but everything on Friday afternoon and not had a lot of sleep since then as I wanted to get it all up and running. yesterday here was holiday as well, so I done fri, sat, sun, mon and was very tired. What I done again was went into windows registry, in the menu\find typed "tronic" and then deleted every file with the name tronic in, where I was going wrong before was, every file that it found looked the same so I thought they was not deleting, after deleting about 30 files it finally said "no more files found" I tried again and it installed. So if anyone else has the same problem just make sure you delete everything with tronic out of the registry

Thanks for all your help

[steppenwolf]

As I said, clean up your registry. This uninstaller posted by teuton is also a good thing to have. Glad you solved your problem Liteace.

[bravealikhatri]

i try to install ESI 2010 but when click Setup Command prompt pop up and hide then nothign happen... why ?

OR

When try to install 2009 its give Error below

[doblemiguel]

we need the esitronic bosch 2010 keygen. Somebody con send me,please?

[paro44]

?

registered today
asked for keygen in first post today
getting banned today

what a short visit...