Lexia not work with Citroen C5 [Sitemap]

meteor80

6th December, 2010, 11:59 AM

paro44

6th December, 2010, 01:03 PM

There seems to be a problem with c5 and peugeot 307 with some chinese clones, but solution i don't know. (http://www.digital-kaos.co.uk/forums/f155/reliable-lexia3-interface-vendor-145519/#post868229)

Someone wrote, that the cables could be the problem (faulty connections?) but i'm not sure.

meteor80

6th December, 2010, 01:30 PM

Cable connections are ok.
Lexia works only with Engine ECU.

woodywoodpecker

6th December, 2010, 01:33 PM

Hello.
I have problem with Lexia.
I buyed china clone but it not working with my Citroen C5.
It not connecting with most ECU. Connect only with some calculators.
Is there any solution or I need to claim that?

Hi mate have you got the lastest update for lexia software off this forum, mine din't work with the cd that came with it but i updated to the latest and it connects to everything i have tried and i have a c5 myself and it works ok now.

meteor80

6th December, 2010, 01:59 PM

I have that update:
http://www.digital-kaos.co.uk/forums/f152/lexia-pp2000-update-without-internet-155768/
And it still not works.
Later i will try with other car.

CBR_bl

6th December, 2010, 05:18 PM

Did you solve your problem with Lexia.

meteor80

6th December, 2010, 05:34 PM

No.
I tried with c5 and citroen berlingo and it works only only with engine ECU and ABS.
Any sugestions?
I tried couple minutes ago with xsara picasso and works the same, only with engine and ABS

meteor80

9th December, 2010, 08:41 AM

Does anyone have any suggestions?

Ashraf6119

9th December, 2010, 10:07 AM

Hi meteor80

Try using PP2000 on C5 by Selecting 407 and see if it will connect, And when it ask you for Build Code put the same one which is on your C5.

Good Luck

Ash

meteor80

9th December, 2010, 10:38 AM

Thanks.
I will try later, but someone told me that I need to reprogram my LEXIA because there is CAN module broken.
Is this right that with engine and ABS connection is via K-line?

paro44

9th December, 2010, 11:07 AM

Thanks.
I will try later, but someone told me that I need to reprogram my LEXIA because there is CAN module broken.
Is this right that with engine and ABS connection is via K-line?

Maybe this can help you: (http://www.digital-kaos.co.uk/forums/f152/pps2000-lexia-repair-154623/)

Or you can try to ask a chinese seller, if there is a solution for that problem. Some of them already know about the problem (Lexia-3 Citroen/Peugeot Diagnostic PP2000 V21 (China Trading Company) - Products (http://www.china-direct-buy.com/v/4/product_detail/7128319/Lexia-3_Citroen_Peugeot_Diagnostic_PP2000_V21.html))

Engine, abs and other seem to be on k-line: (Peugeot OBD II diagnostic connector pinout and wiring @ pinoutsguide.com (http://pinoutsguide.com/CarElectronics/peugeot_obd_ii_diag_pinout.shtml))

meteor80

9th December, 2010, 11:15 AM

Maybe this can help you: (http://www.digital-kaos.co.uk/forums/f152/pps2000-lexia-repair-154623/)

Or you can try to ask a chinese seller, if there is a solution for that problem. Some of them already know about the problem (Lexia-3 Citroen/Peugeot Diagnostic PP2000 V21 (China Trading Company) - Products (http://www.china-direct-buy.com/v/4/product_detail/7128319/Lexia-3_Citroen_Peugeot_Diagnostic_PP2000_V21.html))

Engine, abs and other seem to be on k-line: (Peugeot OBD II diagnostic connector pinout and wiring @ pinoutsguide.com (http://pinoutsguide.com/CarElectronics/peugeot_obd_ii_diag_pinout.shtml))

But i've tried with xsara picasso and citroen berlingo and interface connect only with ABS and Engine.
I try to reprogram and we will see.

paro44

9th December, 2010, 01:03 PM

But i've tried with xsara picasso and citroen berlingo and interface connect only with ABS and Engine.
I try to reprogram and we will see.

Maybe today the other ecus are on can bus and only engine and abs on k-line. How old are your tested cars? I don't know, if the schematics at pinoutguide are up to date.

meteor80

9th December, 2010, 01:47 PM

Citroen Berlingo is 2004 and xsara picasso is 2003.
In the evening i try with C3 2002 and Peugeot 206 2003.
Maybe that will explain something.

meteor80

9th December, 2010, 11:11 PM

I tried with 206 and C3.
Again only ABS and Engine.

paddy69

16th December, 2010, 01:52 PM

As said earlier, there is a known problem with some of these clones! I bought one that worked a while then stopped. When I went back to the website of the company I bought it from it then said "NOT WORKING GOOD WITH 307 AFTER 2004" (It never said this when I bought it)
Anyway, it has gone back, they have received it, and I think they are now very busy on trying to diagnose the problem. It does look like they may be "on the case" and I will post again if this gets resolved happily!
Phil

air-line

7th January, 2011, 09:31 PM

which clones works well with the CAN 307.
who has a clone interface which works quite right? And where you can this interface buy?

hornhunter

8th January, 2011, 02:04 AM

paddy69

8th January, 2011, 10:42 AM

That LEXIA interface You've got is not working with CAN protocol. That is common problem with Lexia from china, only thing You can do is to repair it. If You updated software and it is still not good, then Your problem is interface. As I know very good that CAN protocol is very big problem for some Lexia from China, You can start solving Your problem from there. Lexia is not expensive now, buy another one or try to repair it, You have manual here on DK...

Cheers m8...
Can you give me a link to the repair procedure that you say is here on DK???
After being very patient I started putting pressure on the people in China I bought my clone from. They said that mine had gone back to the factory but they still hadn't from the factory. SO, the rsolution is that they will send me another. SO, if that also stops working I would like to know how to go about doing a repair!
Many thanks!
Phil:D

hornhunter

8th January, 2011, 05:02 PM

Can you give me a link to the repair procedure that you say is here on DK???
After being very patient I started putting pressure on the people in China I bought my clone from. They said that mine had gone back to the factory but they still hadn't from the factory. SO, the rsolution is that they will send me another. SO, if that also stops working I would like to know how to go about doing a repair!
Many thanks!
Phil:D

http://www.digital-kaos.co.uk/forums/f152/pps2000-lexia-repair-154623/

sergei56

15th January, 2011, 10:28 PM

Good afternoon. I too have problems with Lexia. It is my first post. It is necessary to me, that I could download here.

kubd

16th January, 2011, 11:23 AM

I think it is necassary to know what Citroen C5 modell will not work with a Lexia-clone, because there are three C5 models:
C5 I up to 2004, C5 II up to 2008 and C5 III (X7)

I got my Clone last friday, version Lexia 345.13.
Installation on a Laptop with Windows XP with SP3, MS Internet Expolorer/Opera Browser. There are no problems.

Later I tested with my car a Citroen C5 II, 5/2005, no Problems, I can read the faults-journal, can find a faulty PDC-Sensor.

From another user I know about problems with the combination Lexia 347.19 and Citroen C8. Some control unit were not to be found with this software. A downgrade to Lexia 347.08 solve the problems.

Therefore I started with Lexia V 345.13 and then step for step update.

The Citroen C5 III (X7) is reputed to be not operating with clones, but I cannot confirm it because I don't know a driver of this car.

powerpower

16th January, 2011, 11:34 AM

Hi

For c5 (x7), jumpy III, nemo and others you have to buy Peugeot,Citroen S1279 Module

bos1971

16th January, 2011, 07:32 PM

Hi,

Works it good, if you use S1279 Module for Citroen C5 and Peugeot 307?

powerpower

16th January, 2011, 07:47 PM

I only need this module for cars up 2008, my lexia is a china clone
i think you dont?n need it to Peugeot 307 but you can try it .

powerpower

16th January, 2011, 07:52 PM

Diagnostic module of Nemo,Boxer III,Jumper III.
S.1279 module of PPS2000 Lexia-3 Citroen Peugeot( Nemo,Bipper,Boxer III,Jumper III)
connected between lexia3 interface and new cars .
only that module can do it!!

Peugeout Bipper
Peugeout Boxer III
Peugeout Boxer III minibus
Citroen Nemo
Citroen Jumper III
Citroen Jumper III minibus

407ron

16th January, 2011, 11:49 PM

I have used lexia 3 (Clone) on a 2009 C5(x7) with no problems and no extra cable....:-)

meteor80

29th January, 2011, 03:10 PM

Hello.
My interface is repaired now.
Broken was two driver's ULN2003.
After changing that everything works fine.
I can even connect with my C5 and peugeot 307.
I think interface works with my car because i have installed newest lexia 347.28 from that post:

http://www.digital-kaos.co.uk/forums/f152/lexia-pp2000-update-without-internet-155768/

Thanks all.