PDA

View Full Version : Nissan Qashqai 2010



vageric
19th December, 2010, 07:31 PM
Hi Lats,

does anyone have info about Nissan Qashqai 2010 ????
like pdf for wires connections and so!!!!
i know that enigma have it in latest update.
so if someone with enigma can help me out i would
be most appreciated.

regards

eric

markony79
19th December, 2010, 10:10 PM
Its 9s12, but sorry not posible to give conections

milesbetteroff
19th December, 2010, 11:29 PM
Hi mate for some reason I don't seem to be able to upload my PDF for this but see if you can follow this, there are six solider pads on the board to the left of the micro if you hold the dash so they are above the micro the connection are like this top left is purple top right is red below that is yellow below that is black just a bit below these pads is an osilater put the coax cable on here top black bottom White if you are using r260 then read using BMW black cas 9s12xdp512 then edit mileage if you can't edit mileage post your dump as a bin file and I will edit it for you remember post old mileage and new mileage hope this helps

tachonow
19th December, 2010, 11:34 PM
Hi mate for some reason I don't seem to be able to upload my PDF for this but see if you can follow this, there are six solider pads on the board to the left of the micro if you hold the dash so they are above the micro the connection are like this top left is purple top right is red below that is yellow below that is black just a bit below these pads is an osilater put the coax cable on here top black bottom White if you are using r260 then read using BMW black cas 9s12xdp512 then edit mileage if you can't edit mileage post your dump as a bin file and I will edit it for you remember post old mileage and new mileage hope this helps
You mean this dash have secured x gate mcu ? Sh!t !

milesbetteroff
19th December, 2010, 11:37 PM
Sorry have you done one because I have and I am correct!

tachonow
20th December, 2010, 12:00 AM
Sorry have you done one because I have and I am correct!
it was just a question.

teerak2uk
20th December, 2010, 01:24 AM
I thought this was on 93c66?

markony79
20th December, 2010, 08:54 AM
Yes guys
this have 9s12, but update is for this car 900e, that I dont want to give here now conections,
maybe after 6 mounths...

PremierD
20th December, 2010, 09:42 AM
Yes guys
this have 9s12, but update is for this car 900e, that I dont want to give here now conections,
maybe after 6 mounths...


I think you may find you have just made a Big mistake mate ................

milanoffracing
20th December, 2010, 09:52 AM
Yes guys
this have 9s12, but update is for this car 900e, that I dont want to give here now conections,
maybe after 6 mounths...

Maybe if you need a help, we will help you after 6 months. :thefinger:

lukylucienn
20th December, 2010, 10:13 AM
[quote=vageric;893195]Hi Lats,

does anyone have info about Nissan Qashqai 2010 ????

DIGI-PROG III

http://www.digital-kaos.co.uk/forums/f174/nissan-qashqai-2009-odometer-correction-176163/

vageric
20th December, 2010, 10:24 AM
[quote=vageric;893195]Hi Lats,

does anyone have info about Nissan Qashqai 2010 ????

DIGI-PROG III

thnks but this is pdf for eprom 93c66.
need one for 9s12.

lukylucienn
20th December, 2010, 11:09 AM
[quote=lukylucienn;893894]

thnks but this is pdf for eprom 93c66.
need one for 9s12.

you removed your odometer ? do you have pictures ?

vageric
20th December, 2010, 11:51 AM
no, not yet.
car come in one of these days and want to
have some headups bevore!

markony79
20th December, 2010, 12:15 PM
By Dp3, Enigma, Dashcoder???? before the car coming....

markony79
20th December, 2010, 12:22 PM
Or help me with Pontiac g8 2010, and peugeot 308 2010-not 2009,(dash,Bsi,BCM-3 things must to do on this car)

Who has payed calcul for this and will give me,
from Dp3 they want 1200e.....
What you think----I was pay for Qashqai 900e and give for FREE.
What you will do on MY PLACE......think

markony79
20th December, 2010, 12:34 PM
Or help me with
Pontiac G8 2010
Peugeot 308 2010, not 2009(dash,BSI,BCM-must all 3 things)

From Dp3 elprosys they want 1200e

If you can help me with this, to give free,
I can give free anothert things

try to PUT ON MY PLACE....

PremierD
20th December, 2010, 04:56 PM
You have totally missed the Point here mate ... This is a sharing Forum ...

Now you say you paid for the update .. fine ..you paid for the SW update ..and you are not being asked to hand it over .. or share it .. you are being asked for the connection points ..End of story ..

Now If you did not want to share this Information ..the why did you post that you had it ..A bit of a silly thing to do ..which has only resulted in you putting in Doubt that you will recieve any help when asked .. Maybe you can do them all I have'nt a clue ..but just something to remember if you do ...

exe123
20th December, 2010, 07:39 PM
why is everybody asking for the pinout? make picture, get the datasheet and make your own one.

It's one thing if you want to do it without spending huge money on ready solution but then please use brain and not expect to get everything ready on your table

T72
20th December, 2010, 07:59 PM
Enigma have gived Qashqai 9s12 update for free(for me), but no pdf and not one word about "secured". dp3 update for this car is payable, I have reseve it like packet with peugeot/citroen BSI OBD and MB A and B clases(dash flashing), but there is no pdf too... Looks like I must to ask about this car! Will ask tomorow for enigma and elprosys!

marcio1758
20th December, 2010, 08:07 PM
maybe this can help! but you could post a photo of your dashboard, maybe something compatible!

""Look closely mate ...93c66.........not 9s12 but thank you anyway""


sorry I'll pay more attention!:congrats:

PremierD
20th December, 2010, 08:22 PM
maybe this can help! but you could post a photo of your dashboard, maybe something compatible!

Look closely mate ...93c66.........not 9s12 but thank you anyway

butugan_mihai
21st December, 2010, 10:53 AM
hi!I read and write with UPA USB.I attach file and photo!I calculate this dash like ford visteon.OK?

butugan_mihai
21st December, 2010, 11:04 AM
Hi!I read and write this dash with upa usb.I attach picture and bin files for this dash for example.I calculate like ford dash by Visteon!

T72
21st December, 2010, 02:48 PM
no security, simple....

drpeter
21st December, 2010, 02:58 PM
no security, simple....


Nice, script also ready :-)

tachonow
21st December, 2010, 07:44 PM
To much noise for nothing. Ive told to Vageric last week in PM to read this dash with UPA.

drpeter
21st December, 2010, 07:58 PM
To much noise for nothing. Ive told to Vageric last week in PM to read this dash with UPA.

I am proud of you. Too much noise? Because of the posts of the others members (see above) I could add a new car to my list. Thanks :congrats:

vageric
21st December, 2010, 08:55 PM
To much noise for nothing. Ive told to Vageric last week in PM to read this dash with UPA.

yes you did, but car was not yet in.

aaronfirth
28th December, 2010, 04:26 PM
hi!I read and write with UPA USB.I attach file and photo!I calculate this dash like ford visteon.OK?

Hi I have one of these cars and tacho2008 and genuine digimaster 2. will any of these read this car and would you have any idea of the connections. OH and its clearly 9s12 nice picture, but then the 2010 dash is very different looking to 2009.

Wolfster
28th December, 2010, 07:07 PM
Nice post PremierD!

:-)




You have totally missed the Point here mate ... This is a sharing Forum ...

Now you say you paid for the update .. fine ..you paid for the SW update ..and you are not being asked to hand it over .. or share it .. you are being asked for the connection points ..End of story ..

Now If you did not want to share this Information ..the why did you post that you had it ..A bit of a silly thing to do ..which has only resulted in you putting in Doubt that you will recieve any help when asked .. Maybe you can do them all I have'nt a clue ..but just something to remember if you do ...

Rtronics
16th January, 2012, 09:13 AM
You have totally missed the Point here mate ... This is a sharing Forum ...

Now you say you paid for the update .. fine ..you paid for the SW update ..and you are not being asked to hand it over .. or share it .. you are being asked for the connection points ..End of story ..

Now If you did not want to share this Information ..the why did you post that you had it ..A bit of a silly thing to do ..which has only resulted in you putting in Doubt that you will recieve any help when asked .. Maybe you can do them all I have'nt a clue ..but just something to remember if you do ...

Hey Mate, i did one today. Here is all the info i worked out. Also as a bonus i did a cluster for the dealer in which he gave me a brand new virgin cluster never plugged in.

Enjoy !!!!

lashkar97
16th January, 2012, 10:16 AM
i think u need nissan siemens VDO conection pdf for 912x
no mention i will send u pdf via email if dk member is not angry but its conection of R260

rastus86
16th January, 2012, 12:30 PM
look very close to the new navara dash the ic is the same

sueldacables
1st December, 2013, 08:05 PM
conexion for UPA usb,green reset,saludos232881

rukartinatv
1st December, 2013, 09:26 PM
delited ...........................