mazda 6 dpf regen tool

[cleevesy]

Had a customer in today with mazda 6 has dreaded dpf light flashing and engine light on , has had new paf fitted does anybody no what tools can do re gen , or is vcm the only tool?

Fault codes present

P242F Diesel Particulate Filter Restriction - Ash Accumulation

P2458 Diesel Particulate Filter Regeneration Duration

[Meat-Head]

:roflmao::roflmao::roflmao::roflmao::roflmao::rofl mao:

You do like your shit jobs - do a search lol - threads started by me!

1) Disconnect battery
2) try disconnecting both pipes, takkes for drive, refit both pipes on pressure sensor, close eyes.

[cleevesy]

read all the treads. seems like you have been down this road my friend! tried disconnecting battery etc do you no where paf fluid tank is on this Heep, as would like to check level before i sending it to the stealer?

[justy22]

Remap 24 will sell you an dpf emulator very easy to wire in and no more limp home mode, ?200

[Meat-Head]

paf fluid tank is on this Heep


THOUGHT IT WAS JUST THE FROGGYS THAT DO THAT.
damm caps lock - sorry


Remap 24 will sell you an dpf emulator very easy to wire in and no more limp home mode, ?200

OH, do link and spam - need to do a Shaguar - blokes a total cock - he can get it, we will fit it.

[ADTS]

CarmanScan light regens these no problem, done many
regards

[cleevesy]

Thanks justy , il see what the stealer says 2moro, and if its bad news, i will give the customer the emulator option.

Makes sense Meathead , the only time i ever play with these dpf is on pugs thats why i assumed there is fluid.

http://www.remap24.co.uk/home

[Meat-Head]

CarmanScan light regens these no problem, done many
regards

ARSE when we had the one we had, guy round corner said nil poi!

[justy22]

Thanks justy , il see what the stealer says 2moro, and if its bad news, i will give the customer the emulator option.

Makes sense Meathead , the only time i ever play with these dpf is on pugs thats why i assumed there is fluid.

remap24 (http://www.remap24.co.uk/home)


You can also run with the pipes to the sensor disconnected and this keeps it out of limp for a while, best soloution is emulator , i have used one and they are very good

[ADTS]

ARSE when we had the one we had, guy round corner said nil poi!

got to go in under mazda5 then all clear :)

[danymec]

The filter is over-laden ash and must be washed or replaced and must be reset with a filter machine.

[tomtom0785]

The 2 faultcodes of the first post are not because of overload - it's a fault if oil level (calculated) gets too high! the 2 faults most of time are set together!! do an oil change, reset the oil parameters, clear faults and then should be ok! please check if there isn't a software Update for the ECU avaliable! (Mazda 5+6 don't have extra FAP fluid - only the Mazda 3 with the PSA 1,6 Engine) and have a look for the load of the DPF in LiveData - but normally P242F is set if the calculated oil level in the ECU is too high,....