Vauxhall corsa remote programming

[beea]

Hi, I have a vauxhall corsa c 2001 year model. I need help with procedure using opcom on how to program a new central locking remote control, it is the one where the immob chip is mounted in the horse shoe and not in the remote. Any help would be great thanks.

[dam495]

how long are you using opcom ? is really good op com? do you know something for work in vw cars , something like opcom? about your problem i will check , and send for you what you must do.

[baracuda26]

Hi, I have a vauxhall corsa c 2001 year model. I need help with procedure using opcom on how to program a new central locking remote control, it is the one where the immob chip is mounted in the horse shoe and not in the remote. Any help would be great thanks.

Look at that
http://opcomforum.yolasite.com/guides-and-info.php

[beea]

Look at that
http://opcomforum.yolasite.com/guides-and-info.php


Thanks for the like but i have already visited this site and downloaded the immob procedure but this dosent mention programming just the remote for central locking, or an i missing something and you have to go through the whole key programming procedure as if you are programming a complete new key.

[tdor49]

Thanks for the like but i have already visited this site and downloaded the immob procedure but this dosent mention programming just the remote for central locking, or an i missing something and you have to go through the whole key programming procedure as if you are programming a complete new key.


you need sbb to program corsa c remote

ad100/t300 won't program remote for some strange reason but it will program transponder

i have also tried to use op-com but it usually doesn't work for me too !!!

[foxtec800]

remote only is programmed in body control module,
if new key is used this must be programmed in immobiliser system

[beea]

remote only is programmed in body control module,
if new key is used this must be programmed in immobiliser system

Thanks i will give that a try.

[dam495]

you need sbb to program corsa c remote

ad100/t300 won't program remote for some strange reason but it will program transponder

i have also tried to use op-com but it usually doesn't work for me too !!!

t300 and mvp work fine with ford pats 1, pats 2 , pats 3, pats 3can, pats4?

and how can we solve incode out code?
sbb work fine with corsa c 2001 , i've made one a long time ago,

[Atex31]

Hi,

It's true, the remote is programmed in the BCM, you will need to log in with the PIN code first, on a Corsa C you can get the login code by connecting to instrument with Opcom and then reading the eeprom, (checkbox on bottom left of of display) from there you can read PIN or correct mileage.
If you try to use a later cracked version of Opcom, you will find that some of the functions are disabled including EEprom/PIN read and mileage correction in the instument program.

Hope that helps

Regards

Atex31

[beea]

Thanks again to foxtec800 and atex31 had the vehicle back in today extracted the code from the dash and programmed the remote first time in the bcm, thanks for the advice.:hello: