View Full Version : Oscam + CCcam 2.1.3
kopkidda
29th March, 2011, 09:09 PM
I have pli jade 3 iamge and dont have Oscam + CCcam 2.1.3 in my addons menu. Can someone poiint me in the correct direction to get this addon onto my dreambox by other means.
Thanks
davvo
30th March, 2011, 12:31 AM
ok
(http://www.digital-kaos.co.uk/forums/members/97297-kopkidda/)
kopkidda
30th March, 2011, 09:46 AM
ok
(http://www.digital-kaos.co.uk/forums/members/97297-kopkidda/)
Hey Davvo, do you know where to get this file?
davvo
30th March, 2011, 02:33 PM
DM500S EDG-Nemesis 4.4
(http://tinyurl.com/6dqycx2)
kopkidda
30th March, 2011, 02:46 PM
Good man
Is Nemesis image any good?
davvo
30th March, 2011, 03:29 PM
when i had a 500
thats what i used
kopkidda
30th March, 2011, 03:42 PM
Sound so will give it a go.
smirnoff_rules
30th March, 2011, 04:27 PM
this is for dm500 clone safe
oscam/cccam
DM500S EDG-Nemesis 4.4 BlackMatrixSilver CCcam2.1.4+Oscam
Download 500s EDG-Nemesis 4[1].4-19.10.2010.flash.rar for free on uploading.com (http://tinyurl.com/6dqycx2)
can someone pm this file or the file l would need for a dm500 pli img this isnt working now cheers
SGTFlipFlop
30th March, 2011, 05:25 PM
Yeah, Wouldnt mind a file for the Pli image aswell, DM500
smirnoff_rules
30th March, 2011, 05:50 PM
found this but not 100% sure its the right one ? http://rapidshare.com/files/455138953/cccam-oscam-test.rar
davvo
30th March, 2011, 06:47 PM
@smirnoff_rules (http://www.digital-kaos.co.uk/forums/members/46-smirnoff_rules/)
whats not working ?
the EDG-Nemesis link
uploaded to here in post above
smirnoff_rules
30th March, 2011, 07:05 PM
@smirnoff_rules (http://www.digital-kaos.co.uk/forums/members/46-smirnoff_rules/)
whats not working ?
the EDG-Nemesis link
uploaded to here in post above
cant download link:
Sorry, you have reached your daily download limit.
Please try again tomorrow or acquire a premium membership.
l havnt downloaded anything lol
davvo
30th March, 2011, 07:12 PM
i have uploaded the image on here now look at post 5 of this thread
smirnoff_rules
30th March, 2011, 07:16 PM
sorry m8 thought it was just the oscam and ccam files not an image
davvo
30th March, 2011, 07:18 PM
oscam and cccam
are built into that image
smirnoff_rules
30th March, 2011, 07:22 PM
oscam and cccam
are built into that image
l no m8 , love pli so dont want to change , lm sure it will be added to addons soon , it is on the tm500/600 addons or l will have to manually add if l can find the files only
chazt
30th March, 2011, 07:29 PM
have downloaded cccam-oscam test what do i do with it now
i have DM500 with jade 3 maxvar image
kopkidda
30th March, 2011, 07:31 PM
l no m8 , love pli so dont want to change , lm sure it will be added to addons soon , it is on the tm500/600 addons or l will have to manually add if l can find the files only
Im looking for the CCcam 2.1.3 and Oscam file to, dont want to change off pli as workign great, if you get it will you post it. Cheers
smirnoff_rules
30th March, 2011, 07:32 PM
have downloaded cccam-oscam test what do i do with it now
i have DM500 with jade 3 maxvar image
l found that on another forum it might well be wrong , no ones replied on there about it ?
satsmo
30th March, 2011, 07:35 PM
Im looking for the CCcam 2.1.3 and Oscam file to, dont want to change off pli as workign great, if you get it will you post it. Cheers
Use a workaround, install newcs/cccam, rename your oscam binary to newcs, then overwrite the newcs cs binary.
Input your oscam configs in and that should do it.
the man
30th March, 2011, 07:38 PM
any info on wheres boxkey go ? oscam or cccam?
chazt
30th March, 2011, 07:40 PM
have uploaded to downloads dreambox other
smirnoff_rules
30th March, 2011, 07:45 PM
have uploaded to downloads dreambox other
have u tested that file to see if it works?
thered
30th March, 2011, 07:51 PM
i have a dm7025 i use nabilo its enigma 2 much the same as dm800
question is i have d/loaded oscam/cccam from the server and installed but now i am unsure what to do next do i need to add some files to oscam and if so where is it i assumed it would be in the same ect folder as my cccam configuration but its not
ty
chazt
30th March, 2011, 07:55 PM
havent tested file just downloaded it hoping someone with more sat knowlage might help me to find out what to do with it
the man
30th March, 2011, 08:00 PM
oppsss gave info or a e1 box , not e2 sorry
smirnoff_rules
30th March, 2011, 08:04 PM
i have a dm7025 i use nabilo its enigma 2 much the same as dm800
question is i have d/loaded oscam/cccam from the server and installed but now i am unsure what to do next do i need to add some files to oscam and if so where is it i assumed it would be in the same ect folder as my cccam configuration but its not
ty
l was hoping u knew so my channels would clear lol , at least l can test for u lol
thered
30th March, 2011, 08:32 PM
l was hoping u knew so my channels would clear lol , at least l can test for u lol
lol no sorry m8 im not sure
i havent even looked today but i noticed yesterday that pick tv is black and i also more worryingly noticed its on the same transponders as sky sports
but in saying that if you have a motor just swing it round the main channels we watch are freeview the discoveries kids and sport can all be found on foriegn sat just change the audio
i know howver getting the wife to do that is a different matter lol
if you get it sorted drop me a line im retiring now for the day but if not i will have a browse around and see if their are any solutions tommorow and post
davvo
30th March, 2011, 08:39 PM
ok----------------------------
smirnoff_rules
30th March, 2011, 08:41 PM
@thered
you need to edit you configs
ln var/tuxbox/config
i posted a guide with files the other day on dk
but i took it off as i might be breaking the rules
with the configs
just post it m8 if mods remove it then thats it but saying that ccam and so on do nothing without a line if u get me and no one here has written a word about them
or pm them to me and l will and they can tell me off lol
thered
30th March, 2011, 08:46 PM
@thered
you need to edit you configs
ln var/tuxbox/config
i posted a guide with files the other day on dk
but i took it off as i might be breaking the rules
with the configs
please do as smirnoff said i think as long as you are only instructing ie for information purpose only and not exchanging anything illegal like c lines it is ok i think
it would be good for all members to see if not appropriate it will be removed
if so pm me lol
cheers
satsmo
30th March, 2011, 08:49 PM
I am not here then :hmmmm2: :D
davvo
30th March, 2011, 08:50 PM
done on page 2
thered
30th March, 2011, 08:53 PM
I am not here then :hmmmm2: :D
sorry missed you lol
never was good at hide and seek roflmao
satsmo
30th March, 2011, 08:55 PM
You only see what you want :D
I am about to tidy up the thread a bit but davvo's short readme is fine so no need for that to go anywhere, unless someone kicks up.
BTW look at dvbapi also.
thered
30th March, 2011, 08:56 PM
@thered
you need to edit you configs
ln var/tuxbox/config
put these 3 files ln var/tuxbox/config
put your boxkey in oscam server file
looks like this
boxid = yourboxid
put this in cccam cfg
N: 127.0.0.1 12000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
restart oscam
thats it
cheers will this work on enigma 2 i wont have time to mess tonight wife is hogging everything but i will have a go tommorow
davvo
30th March, 2011, 09:12 PM
cheers will this work on enigma 2 i wont have time to mess tonight wife is hogging everything but i will have a go tommorow
yes will work on both enigma 1 and enigma 2
chazt
30th March, 2011, 10:36 PM
thanks for posts sorry to be so dumb where do i find boxkey
davvo
30th March, 2011, 11:07 PM
thanks for posts sorry to be so dumb where do i find boxkey
rupert gives em out lol
have you got a sly card ??
the man
30th March, 2011, 11:35 PM
any reason why wont work
http://192.168.0.30:8888/
davvo
30th March, 2011, 11:48 PM
any reason why wont work
http://192.168.0.30:8888/
is that the dm ip ?
in oscam config have you got this line
if not copy paste and save restart oscam
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100,192.168.2.2-192.168.2.100
the man
30th March, 2011, 11:59 PM
is that the dm ip ?
in oscam config have you got this line
if not copy paste and save restart oscam
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100,192.168.2.2-192.168.2.100
yes buddy thats my dm ip
have this
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100,192.168.2.2-192.168.2.100
davvo
31st March, 2011, 12:03 AM
have you got oscam installed on dm
cuz you need that
as well as the configs
the man
31st March, 2011, 12:06 AM
iv got a old white card , its all working now getting picktv on 2boxs ect , but cant see end dates to the card or get into weboscam , thank you
need to read up on oscam updating card ect ,
davvo
31st March, 2011, 12:48 AM
iv got a old white card , its all working now getting picktv on 2boxs ect , but cant see end dates to the card or get into weboscam , thank you
need to read up on oscam updating card ect ,
you can play about with the port for [webif]
try 8080 edit in config
restart oscam after you edit
[webif]
httpport = 8080
httpuser = admin
httppwd = admin
davvo
31st March, 2011, 01:00 AM
8888 admin mypass works for me for [webif]
but some peeps have reported
that to get into [webif]
they used there
dreambox name and password
httpport = 16002
httpuser = root
httppwd = yourdreamboxpass
try that
thered
31st March, 2011, 08:23 AM
@thered
you need to edit your configs
ln var/tuxbox/config
unzip the file below
put these 3 files ln var/tuxbox/config
- oscam.conf
- oscam.user
- oscam.server
put your boxkey in oscam server file
looks like this
boxid = yourboxid
( boxkey is like this 12345678 and not like this 12 34 56 78 )
put this N line in cccam cfg
N: 127.0.0.1 12000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
restart oscam
thats it
you can log in to oscam via browser
DM IP http://192.168.X.X:8888
[webif]
httpport = 8888
httpuser = admin { you can change to what u like in config }
httppwd = admin { restart oscam for change to take }
i have added the files to oscam i have added the n line to cccam
config files for both e1 and e2
i have added the files to oscam i have added the n line to cccam but im not sure about box key my sky card is old and pick tv does not clear
when i insert my DM IP 192.168.xx.xxx:8888 i also get a blank screen if i just insert my DM IP i get the dm web control panel
am i barking up the wrong tree here as it seems this is for people with a new card that are sharing that card or will this sort out my shares i recieve as well
if so how do i get my boxkey from my old card
cheers
davvo
31st March, 2011, 10:15 AM
what card have you got white or old blue card
to get the boxkey for your white card
look on bottom of sly box for serial number 17 digits
input the 17 digits into Dreambox Config Creator
this will generate a boxkey which is 8 digits
like this 12 34 56 78
then put the boxkey in oscam server file
like this 12345678
u.s
31st March, 2011, 10:19 AM
you don't need to enter the boxkey and you need to add the following under the [webif] section:
httpallowed = 192.168.0.0-192.168.255.255
assuming your internal network ip is 192.168.x.x
thered
31st March, 2011, 10:21 AM
what card have you got white or old blue card
to get the boxkey for your white card
look on bottom of sly box for serial number 17 digits
input the 17 digits into Dreambox Config Creator
this will generate a boxkey which is 8 digits
like this 12 34 56 78
then put the boxkey in oscam server file
like this 12345678
i havent got my sky+ box i got shot of it my card is old now too its blue
thered
31st March, 2011, 10:23 AM
you don't need to enter the boxkey and you need to add the following under the [webif] section:
httpallowed = 192.168.0.0-192.168.255.255
assuming your internal network ip is 192.168.x.x
do i change the 2 x's to my dreambox ip or router
cheers
davvo
31st March, 2011, 10:29 AM
you don't need to enter the boxkey
hows oscam reading the sly card with no boxkey
if i remove my boxkey the picture goes
im no expert on oscam only been using it a few days myself
just passing on what i know lol
thered
31st March, 2011, 10:30 AM
you don't need to enter the boxkey and you need to add the following under the [webif] section:
httpallowed = 192.168.0.0-192.168.255.255
assuming your internal network ip is 192.168.x.x
just to verify i have change this in my oscam config
i entered my dreambox ip and restarted cam no joy at all
it goes green as if its cleared but it isnt a i think all others are ok just pick tv
thered
31st March, 2011, 10:32 AM
hows the oscam reading the sly card with no boxkey
if i remove my boxkey the picture goes
do i need the boxkey then even if i am viewing someone elses card or is this something they need to do at their end to share it
davvo
31st March, 2011, 10:37 AM
you only need the boxkey for your sly card
you dont need a boxkey if your viewing someone elses card
and you dont need a boxkey if your viewing redlight/stc card
cccam takes care of the receiving bit
u.s
31st March, 2011, 11:04 AM
upgrade to the latest oscam.ppc
http://www.multiupload.com/UQ7NBJ3W92
i can confirm that you do not need boxkey for your sly card
to test the webif add the following:
httpallowed = ip address of p.c
the httpallowed setting defines which i.p address can access the oscam webif, it can be a single ip (e.g 192.168.0.3) or a range of ips (e.g 192.168.0.3-192.168.0.50)
thered
31st March, 2011, 11:29 AM
you only need the boxkey for your sly card
you dont need a boxkey if your viewing someone elses card
and you dont need a boxkey if your viewing redlight/stc card
cccam takes care of the receiving bit
ahh so im wasting my time then it is my server who needs to update to oscam and change their configuration not me
i was just wondering also the password bit (it may come in handy in the future) do i need to change that in oscam config to my dreambox password or leave it as admin admin (which used to be the router password) or do i change it to my router password
ty
davvo
31st March, 2011, 11:34 AM
leave it to admin
mine is user admin
and i changed the pass to something different
and i left the port as 8888
i log in ok
thered
31st March, 2011, 11:38 AM
leave it to admin
cheers m8 just to confirm it is the server not myself who needs to change it then?
thered
31st March, 2011, 11:59 AM
duplicate please dlete
davvo
31st March, 2011, 12:03 PM
cheers m8 just to confirm it is the server not myself who needs to change it then?
yeah the server needs to change to oscam
davvo
31st March, 2011, 12:10 PM
upgrade to the latest oscam.ppc
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/UQ7NBJ3W92)
i can confirm that you do not need boxkey for your sly card
yeah your right
upgraded to the latest oscam
no boxkey needed
thanks
im still learning about oscam lol
All the latest versions of OScam do NOT need the 0963 BoxID in the oscam.server file.
OScam now reads the boxid directly from the card during start-up.
davvo
31st March, 2011, 01:33 PM
@thered (http://www.digital-kaos.co.uk/forums/members/5707-thered/)
the old blue yellow house sly card
the caid is 0961
the new white cards are caid 0963
thats why they dont work
thered
31st March, 2011, 01:42 PM
@thered (http://www.digital-kaos.co.uk/forums/members/5707-thered/)
the old blue yellow house sly card
the caid is 0961
the new white cards are caid 0963
thats why they dont work
well the cards dead basically anyway but from what you are saying if i wanted to use my dead card i could just change the oscam configuration to 0961 and it would work
davvo
31st March, 2011, 01:50 PM
sly just 0963
you can try 0961
all 3 files need editing restart oscam
whether it works on picktv ??
thered
31st March, 2011, 03:54 PM
no is the answer lol
im not sure but didnt pick tv used to be sky 3 because it used to clear that
davvo
31st March, 2011, 04:15 PM
how long ago
father ted
31st March, 2011, 07:28 PM
silly question but does oscam auto-update your card?????
davvo
31st March, 2011, 08:22 PM
silly question but does oscam auto-update your card?????
AU over CCcam
Many people still use CCcam as client, but unfortunately AU will not work with the CCcam protocol. For AU to work, you should set up OScam and CCcam to use CAMD3 protocol, with an L line in CCcam.cfg. The following is an example of two S02 cards which are updated by a CCcam client through the NewCamd protocol (N Line).
HD+
Unfortunately, OSCam cannot update an HD+ card with a CCcam client, neither by NewCamd, nor by Camd3 protocols. If the server also runs a CCcam server, you can use it as a workaround.
"Direct connection" NOT OK:
CCcam client connected to OScam server through N-line or L-line.
"Indirect" OK:
CCcam client through C-line to CCcam server and CCcam server through N-Line to OSCam
e
RuberDuck
31st March, 2011, 08:30 PM
no is the answer lol
im not sure but didnt pick tv used to be sky 3 because it used to clear that
to answer your question no a old yellow house card ( caid 0961 ) will not work. sky terminated all of these cards once the rollout of the new white ( caid 0963 ) cards had been completed.
jfish
1st April, 2011, 09:54 AM
whats the current state of play with pick tv
is cccam not clearing but oscam is
any other channels sly have implemented this anti cs measures.
davvo
1st April, 2011, 01:38 PM
whats the current state of play with pick tv
is cccam not clearing but oscam is
any other channels sly have implemented this anti cs measures.
oscam reads card and clears pick tv then can pass to other cams
cccam newcs or any other cam not clearing pick tv as card readers
other channels with anti cs measures
dont think so YET
sly sports 1234 and sly 1 and 2 on same transponders
as pick tv and picktv +1
slick_dick
1st April, 2011, 04:58 PM
Thanking you
davvo
1st April, 2011, 05:08 PM
keep your original cccam 2.1.3 config
and add the N line to your cccam cfg
the N line is on page 2 on this thread
slick_dick
1st April, 2011, 05:12 PM
Awesome just what I wanted to hear,
thanks
davvo
slick_dick
1st April, 2011, 05:18 PM
awesome shiznizz
SL!CK :toilet:
davvo
1st April, 2011, 05:30 PM
leave 127.0.0.1 as it is
the port in the n line in cccam must match the port in oscam cfg
which is 12000
you can change that to what port u like
but they must match
slick_dick
1st April, 2011, 05:32 PM
+rep left, thanks again
davvo :D
slick_dick
1st April, 2011, 05:37 PM
who loves ports?
lol
SL!CK
davvo
1st April, 2011, 05:59 PM
you can change test1 test2 to what u like
but they must match in both cccam cfg and oscam user
slick_dick
1st April, 2011, 06:03 PM
............... ;)
satsmo
1st April, 2011, 06:11 PM
Just for thinking why use CCcam in conjuction with Oscam, I am sure there are better ways............as said just a thought :)
BTW I am of course talking about a local only share I would never insinuate other.
slick_dick
1st April, 2011, 06:13 PM
Just for thinking why use CCcam in conjuction with Oscam, I am sure there are better ways............as said just a thought :)
BTW I am of course talking about a local only share I would never insinuate other.
intresting :marchmellow:
satsmo
1st April, 2011, 06:18 PM
I did say look at dvbapi a few pages back.
slick_dick
1st April, 2011, 06:21 PM
and so you did, didnt take much notice of it earlier as I was not sure but checking now :D
thanks satsmo
regards
SL!CK
lincsat
1st April, 2011, 06:25 PM
It's been said elsewhere that DVBAPI is more difficult to configure than CCCam. Apparantly, using MGCamd you can AU the Sky card as well.
All this experimenting looks fun, I wish I had the hardware to have a play around :)
slick_dick
1st April, 2011, 06:29 PM
I do agree with you there lincsat as it looks very intresting, wish I had the time on my hands to experiment.
:(
satsmo
1st April, 2011, 06:31 PM
It was a lot more difficult on first release but it is easy enough to configure but takes a bit of time. But as you said the fun is in the tinkering :)
You can AU the Sly card with Oscam if you have dvapi active so no need for another cam. But horses for courses and each person will have a preferred method, I like mine but as said it takes a bit of work.
slick_dick
1st April, 2011, 06:43 PM
o0o thats sounds very intresting, will be looking into it further as soon as I can
+rep left satsmo
regards
SL!CK
sakiblateef
1st April, 2011, 09:04 PM
@thered
you need to edit your configs
ln var/tuxbox/config
unzip the file below
put these 3 files ln var/tuxbox/config
- oscam.conf
- oscam.user
- oscam.server
put your boxkey in oscam server file
looks like this
boxid = yourboxid
( boxkey is like this 12345678 and not like this 12 34 56 78 )
put this N line in cccam cfg
N: 127.0.0.1 12000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
restart oscam
thats it
you can log in to oscam via browser
DM IP http://192.168.X.X:8888
[webif]
httpport = 8888
httpuser = admin { you can change to what u like in config }
httppwd = admin { restart oscam for change to take }
config files for both e1 and e2
Does this method update the entitlements?
psul
3rd April, 2011, 02:59 PM
My white card just updated today using an N line.
AU over CCcam
Many people still use CCcam as client, but unfortunately AU will not work with the CCcam protocol. For AU to work, you should set up OScam and CCcam to use CAMD3 protocol, with an L line in CCcam.cfg. The following is an example of two S02 cards which are updated by a CCcam client through the NewCamd protocol (N Line).
HD+
Unfortunately, OSCam cannot update an HD+ card with a CCcam client, neither by NewCamd, nor by Camd3 protocols. If the server also runs a CCcam server, you can use it as a workaround.
"Direct connection" NOT OK:
CCcam client connected to OScam server through N-line or L-line.
"Indirect" OK:
CCcam client through C-line to CCcam server and CCcam server through N-Line to OSCam
e
sakiblateef
3rd April, 2011, 03:46 PM
I heard it works with Mgcamd only?
psul
3rd April, 2011, 04:23 PM
I heard it works with Mgcamd only?
replied to your pm.
Yes heard the same but my entitlements have updated since yesterday by 20 days
Rodbouy
10th April, 2011, 09:24 PM
Been trying to read as much as I can on this.
Im most likely totaly wrong here but this is was Im taking from it.
Say a server has been running CCcam for Server and Clients.
Now the server installs Oscam to read the Card then you add a N line to the already created CCcam.cfg.
This then links the two so that Oscam reads the card and passes the info for CCcam to share? Thus clients lines being unchanged.
I have a Dm500s Pli jade3 and I am going to manually add
oscam-svn4864-powerpc-tuxbox
rapscallion
11th April, 2011, 12:06 PM
How do I get Oscam to start. I dont bhave a script for it
davvo
11th April, 2011, 11:20 PM
what box what image ?
rapscallion
12th April, 2011, 12:22 AM
what box what image ?DM800 Dream elite
davvo
12th April, 2011, 12:40 AM
DM800 Dream elite
Oscam for Dream elite
ftp to tmp
and
manual install via addons
start script will auto install to /usr/camscript
backup your conf files in var/tuxbox/config
as this will overwrite them when installed
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=WRHCPS4E)
Rodbouy
12th April, 2011, 09:00 AM
Hi,
Can any one help me out.
I have managed to get the channel to clear With oscam on the Dm500s.
Now in the Menu (6) Softcam setup.
I had Cardserver set to OScam and Default SoftCam to 2.1.3 and it wouldnt clear. Only when I removed the default soft cam and just left Cardserver to OScam would it clear is this correct ?
Also I just cant get my 2nd box to clear this channel. I dont know what I am doing wrong.
Can some one take a look at my settings and let me know. As I am at a total loss.
Also in the web IF i could see my box connecting and then it would say connection closed to client.
jfish
12th April, 2011, 10:30 AM
Hi,
Can any one help me out.
I have managed to get the channel to clear With oscam on the Dm500s.
Now in the Menu (6) Softcam setup.
I had Cardserver set to OScam and Default SoftCam to 2.1.3 and it wouldnt clear. Only when I removed the default soft cam and just left Cardserver to OScam would it clear is this correct ?
Also I just cant get my 2nd box to clear this channel. I dont know what I am doing wrong.
Can some one take a look at my settings and let me know. As I am at a total loss.
58322
Also in the web IF i could see my box connecting and then it would say connection closed to client.
oscam is the card server and mgcamd (for me anyway) is the softcam
use newcamd as protocol when configured in the oscam config file.
Rodbouy
12th April, 2011, 11:32 AM
OK what I have done is just bypass CCcam.cfg
I have added the users to OScam.users and in OScam.conf activated the CCcam protocol.
So the clients Clines will clear through OScam and no need for the CCcam.cfg
I think you need dvbapi activated for this and that will also AU your card.
@ the ppl using the CCcam.cfg could you still use CCcaminfo while using OScam?
alonso
12th April, 2011, 09:10 PM
OK what I have done is just bypass CCcam.cfg
I have added the users to OScam.users and in OScam.conf activated the CCcam protocol.
So the clients Clines will clear through OScam and no need for the CCcam.cfg
I think you need dvbapi activated for this and that will also AU your card.
@ the ppl using the CCcam.cfg could you still use CCcaminfo while using OScam?
I just cant get my head around this! So by adding clients to .users you dont need to do anything to cccam.cfg? I have dm800 blackhole image and have used to addons to download the oscam+cccam2.1.3 but my oscam.conf file doesnt mention cccam? I have this at the bottom:
[newcamd]
Key = 0102030405060708091011121314
Port = 50000@093b:0000
Port = 50001@0919:0000
Have you got it working Rodbouy? Could I copy your oscam & cccam files?
stenovelli
12th April, 2011, 09:31 PM
Straight answers please lads: I am in the process of buying a dreambox from ebay already has pli jade and cccam installed,but seller says i still have to connect a c-line and sub to a card sharer to recieve sly. Do i or don,t i need to pay.
Bulld0g
12th April, 2011, 09:33 PM
Straight answers please lads: I am in the process of buying a dreambox from ebay already has pli jade and cccam installed,but seller says i still have to connect a c-line and sub to a card sharer to recieve sly. Do i or don,t i need to pay.
Yes you will have to pay, search Google for more info.
stenovelli
12th April, 2011, 09:36 PM
Yes you will have to pay, search Google for more info.
Thanks bulldog, people say youve got to be careful who you use for reliability etc etc. Can you recommend a site please.
Bulld0g
12th April, 2011, 09:38 PM
Card share talk is not allowed on here m8, your best bet is search Google, there are plenty of c/s forums around where you will find the info your looking for.
Rodbouy
12th April, 2011, 10:04 PM
I just cant get my head around this! So by adding clients to .users you dont need to do anything to cccam.cfg? I have dm800 blackhole image and have used to addons to download the oscam+cccam2.1.3 but my oscam.conf file doesnt mention cccam? I have this at the bottom:
[newcamd]
Key = 0102030405060708091011121314
Port = 50000@093b:0000
Port = 50001@0919:0000
Have you got it working Rodbouy? Could I copy your oscam & cccam files?
You dont need to use the CCcam.cfg to share via oscam.
Just set oscam.conf to use CCcam protocol and enable dvbapi in there too.
Now add the users ot oscam.user.
read in here lots of info.
oscam - Revision 4981: /trunk/Distribution/doc/example (http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/example/)
oscam - Revision 4981: /trunk/Distribution/doc/txt (http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/txt/)
Keep at it and you will get it. Post back at bits you get stuck, it will help others who see where you get stuck at it get fixed.
alonso
12th April, 2011, 10:18 PM
You dont need to use the CCcam.cfg to share via oscam.
Just set oscam.conf to use CCcam protocol and enable dvbapi in there too.
Now add the users ot oscam.user.
read in here lots of info.
oscam - Revision 4981: /trunk/Distribution/doc/example (http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/example/)
oscam - Revision 4981: /trunk/Distribution/doc/txt (http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/txt/)
Keep at it and you will get it. Post back at bits you get stuck, it will help others who see where you get stuck at it get fixed.
Thanks mate, found a good example in the 1st link, I'll keep going!!
Oh, so I dont have to change anything at clients end/there cccam configs? ie clines?
Rodbouy
12th April, 2011, 11:56 PM
Thanks mate, found a good example in the 1st link, I'll keep going!!
Oh, so I dont have to change anything at clients end/there cccam configs? ie clines?
Thats correct mate, all server end. Client does not need to change.
One thing i noticed in testing.
say the clinet has 2 lines. One Cline from Local 1(oscam) and 1 cline from Local 2(cccam)
Now for some reason and i think this is it, as the clinets default cam is CCcam then it will use the cline from the native CCcam server.
Now as this is the case then the cline from the CCcam thinks its clearing that channel (PTV) so it wont switch lines to compensate and have the OScam clear that channel.
Has anyone else noticed this ?
All in house local testing ofcourse.
satsmo
13th April, 2011, 12:01 AM
As said by BD I hope we are discussing purely local here ;)
Outside of that will lead to a decent thread been closed, so keep the CS chat down a bit please.
gsmtech
14th April, 2011, 12:06 PM
I notice that and old version of CCCam 2.1.3 seems to be popular when used in conjunction with OScam, is this purely so when resharing to clients the card can still show as Hop 0 ?
I currently use CCCam 2.2.1 as card reader for a 0963 card, update entitilements automatically by recieving EMMS from a client on my local LAN. The servers a DM500c hence no direct Sat feed possible updates have to be from a client.
Can I just install OSCam on the server, remove the box key etc..from CCCam.cfg and use OScam to read the card instead ? I take it I just then add a L line to CCCam.cfg, to reshare to clients ?
In effect I shouldnt have to change anything on the client side ? Will automatic entitlement updates the card still work ?
seanmckeown
14th April, 2011, 01:07 PM
sorry, i started a new thread asking this, didnt look to see if there was a thread open already
....in var/tuxbox/config/ I have oscam.serv, oscam.conf and oscam.user
i have put my NLine in my cccam.cfg
i have put my boxid in oscam.serv.
Is there anything else i need to be doing? Is it enough that i have placed these files in var/tuxbox/config/ or do i have to install them some way?
davvo
14th April, 2011, 01:08 PM
you can use oscam on its own with [dvbapi]
and do away with cccam
but cant talk about that on here
as it will be breaking the rules
i think
southpaw
14th April, 2011, 05:50 PM
is oscam easier to configure as server on dm500 or 800 for internal shares only , cheers guys
alonso
14th April, 2011, 09:48 PM
I've managed to get oscam to clear my card but my other box on cccam doesnt connect! At least I got the 1st bit going lol
satsmo
14th April, 2011, 09:52 PM
is oscam easier to configure as server on dm500 or 800 for internal shares only , cheers guys
DM500 is a lot more stable as a server in comparison to the 800.
satsmo
14th April, 2011, 09:53 PM
you can use oscam on its own with [dvbapi]
and do away with cccam
but cant talk about that on here
as it will be breaking the rules
i think
I spoke about it briefly a few pages back, you can report me later :)
Rodbouy
14th April, 2011, 09:58 PM
OK looking for Blade Media 7000HD users here that are using OScam as their LOCAL and OWN server.
I am using my own local card and for some reason the blade 7000HD wont connect to the Oscam server. WebIF reports Illegal username and boots it.
Anyone had similar issues.
PS this was connecting direct to oscam.user and using CCcam.cfg
davvo
14th April, 2011, 10:09 PM
try without CCcam.cfg
use [dvbapi]
Rodbouy
14th April, 2011, 10:22 PM
I have dvbapi enabled in oscam.conf
Now do you mean add the details to oscam.dvbapi or in oscam.user direct ?
Rodbouy
14th April, 2011, 11:13 PM
This is what I have
oscam.conf short version just to show protocol and dvbpi
# protocols
[cccam]
port = 12005
reshare = 2
version = 2.1.3
stealth = 1
[dvbapi]
enabled = 1
user = Rodbouy
socket = /tmp/camd.socket
boxtype = dreambox
au = 1
oscam.user
#this is the dvbpi from conf
[account]
user = rodbouy
monlevel = 0
uniq = 0
group = 1,2
au = myreader
#this is the blade 7000 running cccam 2.0.11
[account]
user = Test
pwd = Test1
monlevel = 0
uniq = 0
group = 1,2
au = myreader
NOw in the WebIF is comes up encrypted cccam client
illegal username
davvo
15th April, 2011, 12:51 AM
illegal username
you put
[dvbapi]
user = Rodbouy
[account
user = rodbouy
rodbouy
Rodbouy
username dont match
no caps
user = Test
pwd = Test1
try
user = test
pwd = test1
no caps
restart oscam after edit
Rodbouy
15th April, 2011, 08:17 AM
Sorry mate that was just a typo in post.
this is the error it throws up in webIF
encrypted cccam-client (ext IP of my box) rejected (invalid access)
anonymous disconnected from (ext IP of my box)
Oscam does not like the type of CCcam that run in the Blade.
Does any one know who does the FW for these boxes or where they release their FW.
Rodbouy
15th April, 2011, 01:30 PM
NEWCAMD connects fine so its just the CCcam client.
davvo
15th April, 2011, 04:27 PM
without seeing your configs im just guessing for you
add this line to your oscam users
caid = 0500,0603,1803,0100,0963,1830,1702,0919,0918,093B, 098E,09C4,09C7,0604,0622,090F
restart oscam after edit
and give it 30 secs to clear
Rodbouy
15th April, 2011, 06:50 PM
Got it all sorted mate, Its down to the modified CCcam version that is used on the blade. Maybe in time they will update this.
The blade also uses NEWCAMD so I have just enabled both CCcam and NEWCAMD protocols in oscam.conf and problem solved.
Cheers for the help tho mate.
bladez
22nd April, 2011, 11:19 PM
o man
i read all post but only know u guys rox :P i m newbie for oscam i need study abt tht and want 2 get info from u guys ...
plz some ome told me abt oscam for my dm800hd i have server too and need oscam for it :P:beer:
the man
22nd April, 2011, 11:25 PM
English only buddy!
southpaw
7th May, 2011, 03:32 PM
davvo mate , sorry i know you prob fed up of this now , but just to get this right if you wouldnt mind answering
i have downloaded openpli with oscam+cccam already setup
is this all i need to do ?
add to cccam.cfg
N: 127.0.0.1 12000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
enter my boxkey in oscam.server ? 12 34 56 78
restart and jobs a goodun ?
cheers mate
lincsat
7th May, 2011, 03:36 PM
AIUI, you don't need a BK in OSCam, it can detect it automatically.
southpaw
7th May, 2011, 03:58 PM
cheers lincsat , so its just a case of adding the n-line ,
does oscam then hand over to cccam to share (locally only obviously)
my current setup shares on a non default port , does anythin need configging in oscam to reflect this ?
best regards
Rodbouy
7th May, 2011, 10:36 PM
you dont need CCcam to share it
add the users to OScam.users
then enable CCcam and or other protocol in OScam.conf
again all locally ofcourse
lincsat
7th May, 2011, 11:32 PM
I'm far from an expert M8, just relaying what I have read elsewhere. Apparently, if you have an OSCam with the WebIF enabled, you can configure it from there and it's easier than using a txt editor.
Rodbouy
7th May, 2011, 11:59 PM
i was really impressed with the control webif gives you.
southpaw
9th May, 2011, 11:09 AM
you dont need CCcam to share it
add the users to OScam.users
then enable CCcam and or other protocol in OScam.conf
again all locally ofcourse
in what format have you added the users in "oscam.users"
F-Lines , as per usual cccam method ?
i would much prefer to use cccam for sharing , and just use oscam for reading card , but my tests havent allowed me to do this , my 500 can read the card fine , but cant get it to hand over share details to cccam ,
any help/tips very appreciated ?
kopkidda
9th May, 2011, 01:03 PM
in what format have you added the users in "oscam.users"
F-Lines , as per usual cccam method ?
i would much prefer to use cccam for sharing , and just use oscam for reading card , but my tests havent allowed me to do this , my 500 can read the card fine , but cant get it to hand over share details to cccam ,
any help/tips very appreciated ?
This is I believe to be the ideal way to do it with CCcam and Oscam, anybody any idea how to do it?
I think you need to have the EDG nemesis image to start with as this has both cron and Oscam+CCcam in it already.
Rodbouy
9th May, 2011, 01:09 PM
You do not need CCcam at all unless you are use CCcam for other stuff.
Keep it simple and let OScam do it for you.
Southpaw sent you a pm
seanmckeown
9th May, 2011, 02:20 PM
hey rodbouy, i have the same problem as southpaw. Can get oscam to read my card but cant get it to share. Is there anyway you can help?
southpaw
9th May, 2011, 02:24 PM
surely there is an easy way for oscam to hand over to cccam , rather than basically having 2 setups , i much prefer cccam for sharing (for other reasons) so rather than config oscam to share , does anybody please have a method for oscam to read only , and then hand over to cccam ?
would be forever grateful !
davvo
9th May, 2011, 02:35 PM
you already have a method for oscam to read only , and then hand over to cccam
download and install oscam/cccam as one package
put the config files in var/tuxbox/config
put the N-line in cccam cfg
restart oscam via the blue button
thats it
if you have cccam info look in the server bit
and you should see 127.0.0.1 showing 1 card
if not restart oscam again
this is the basic setup to get your sly card working
oscam conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100,192.168.2.2-192.168.2.100
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 12000@0963:000000;12001@0963:000000
oscam server
[reader]
label = slot1
protocol = internal
device = /dev/sci0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
oscam user
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
cccam cfg
N: 127.0.0.1 12000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14copy and paste all the text to the named files
restart oscam go to pick tv and it will work
Rodbouy
9th May, 2011, 02:54 PM
hey rodbouy, i have the same problem as southpaw. Can get oscam to read my card but cant get it to share. Is there anyway you can help?
basing on local only here.
Now say you have 1 box reading card with oscam and 2 other in home.
now the 2 clients in the house would have clines in their cfg file.
The oscam box would have the user pass in oscam.user and the CCcam protocol enable in oscam.conf
i dont see the point in using one to read and pass to another to share it out.
I would only use the cfg for incoming
southpaw
9th May, 2011, 02:56 PM
thanks for your help lads , much appreciated , i did do as davvo says , whilst picktv cleared with local box , my other units at hop1 couldnt open any packages/channels .
i must be overlooking something here , will have another go at it tomorrow when nobody watchin tv
best wishes
southpaw
9th May, 2011, 02:58 PM
basing on local only here.
Now say you have 1 box reading card with oscam and 2 other in home.
now the 2 clients in the house would have clines in their cfg file.
The oscam box would have the user pass in oscam.user and the CCcam protocol enable in oscam.conf
i dont see the point in using one to read and pass to another to share it out.
I would only use the cfg for incoming
but by adding this N-line to my Cccam.cfg
N: 127.0.0.1 12000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
i shouldnt need to enter all users in oscam.users list ?
davvo
9th May, 2011, 03:10 PM
if you dont add the N-line in cccam cfg
oscam wont talk to cccam
adding more users to the oscam user file
is just for when you are using oscam on its own
you onlly need this in the oscam user file
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
once you got it working with cccam
then have a play with oscam on its own
seanmckeown
9th May, 2011, 03:13 PM
with cccam protocol enabled in oscam conf, what is the correct text used in text editor?
would be grateful if you could post a copy
Rodbouy
9th May, 2011, 03:16 PM
Maybe its a personal choice but I am using OScam as my home server, then I add my users to oscam.user and control it all by webIF.
I dont see why there is a need to both.
The only gain there is saving you adding user pass in to oscam.user
Rodbouy
9th May, 2011, 03:17 PM
with cccam protocol enabled in oscam conf, what is the correct text used in text editor?
would be grateful if you could post a copy
I just use DCC to edit and save files
seanmckeown
9th May, 2011, 03:18 PM
if i'm using oscam own its on and want to share locally to another box, what would i input in oscam.user?
at the minute my c:line is C: 192.168.x.x share1 bedroom1
with no share restrictions or no other restrictions, how would i convert this c:line into an oscam share in oscam.user?
davvo
9th May, 2011, 03:22 PM
@Rodbouy (http://www.digital-kaos.co.uk/forums/members/190075-rodbouy/)
he's struggling to get the basic setup working
i think he needs to get that working first
Rodbouy
9th May, 2011, 03:22 PM
if i'm using oscam on its on and want to share locally to another box, what would i input in oscam.user?
at the minute my c:line is C: 192.168.x.x share1 bedroom1
with no share restrictions or no other restrictions, how would i convert this c:line into an oscam share in oscam.user?
[account]
user = share1
pwd = bedroom1
there is other features you can add to this etc au and other stuff.
Rodbouy
9th May, 2011, 03:26 PM
@ davvy you might be right.
1st step for every one should be is get the card to clear.
The test you local setups bit at a time.
Both ways will work its just what people find easier.
Time and patience and it will work.
Just put a pillow on a piece of wall so when you bang your head off it, it wont be as sore ;)
seanmckeown
9th May, 2011, 03:35 PM
[account]
user = share1
pwd = bedroom1
there is other features you can add to this etc au and other stuff.
cheers for your patience, just trying to get my head around this.
so i can run oscam as cardserver with no need to run cccam.
for sharing internally i have this text in oscam.user:
user = share1
pwd = bedroom1
now to the clients box, can i still run cccam as client or do i need to use oscam as client?
Rodbouy
9th May, 2011, 03:38 PM
cheers for your patience, just trying to get my head around this.
so i can run oscam as cardserver with no need to run cccam.
for sharing internally i have this text in oscam.user:
user = share1
pwd = bedroom1
now to the clients box, can i still run cccam as client or do i need to use oscam as client?
The brick was ref was when trying to get it working just incase anyone thought it was some thing else :) and complaining about the questions.
I know I was going mad at start.
Yes the client box can stay as is. so the Cline in the CCcam.cfg would stay the same.
bladez
10th May, 2011, 02:27 PM
some one plz give me basic info
1- which image is best for oscam ( plz provide link )
2- boxkey is must to put in ocsacm cfg (user or server what else)
3- Basic guides to share cline as local :D in oscam
i read alot of post but no one provide basic guide,thats y i need to postt this thread for newbies bcoz im too :P
sakiblateef
11th May, 2011, 10:48 PM
I dont see why there is a need to both.
Using Oscam on its own leaves your card open to reshare despite setting restrictions like hops etc.
Using cccam with Oscam is a lot safer.
satsmo
11th May, 2011, 11:10 PM
Take a look at anticasc, although buggy it has some potential to prove useful if ironed out.
Oscam will interrogate each user for ecm requests for 10 minutes and pick out the naughty ones. Then you can decide what to do or let Oscam do the work for you.
Rodbouy
12th May, 2011, 02:10 AM
Using Oscam on its own leaves your card open to reshare despite setting restrictions like hops etc.
Using cccam with Oscam is a lot safer.
Suppose it depends on if you trust the person you share with and if you dont, Dont.
I have been using anticasc and so far nothing has flagged.
You can enable it in oscam.conf
see here
http://oscam.ump2002.net/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
sakiblateef
12th May, 2011, 08:43 PM
Oscam is a proxy, it will reshare regardless of what restrictions you set including anti cascading.
If you have clients you trust then its fine to use Oscam otherwise I would use Oscam with CCcam to gain some control of the share.
Rodbouy
13th May, 2011, 04:46 PM
Only thing is that I been told, even if you have more control over the share by using OScam+CCcam if the clinet uses OScam he can still reshare.
Replay 2
14th May, 2011, 04:41 AM
Great thread..I read (almost) all of it ,
but I still can't clear my card. :stoned:
I need to view my 093b card on dream elite image DM8000. no sharing. so I understand I can use Oscam alone.
Which svn is stable?
Which config files I should use?
and I don't have a box ID, but I understand I don't need it with Oscam...right?
Thanks for all the help..
southpaw
14th May, 2011, 01:31 PM
If oscam can't restrict reshare rights then its a fundamental flaw . Having no control over shares is like issueing a blank cheque
Rodbouy
14th May, 2011, 07:36 PM
If oscam can't restrict reshare rights then its a fundamental flaw . Having no control over shares is like issueing a blank cheque
Its depending on trust, and possibly a kink in payservers chain.
Rodbouy
14th May, 2011, 10:38 PM
Just thought I would add this that would better explain anticasc.
it was posted my a Ianmassy from a other forum.
so use anticascading then,set to only give 3 ecm's in the time before your card starts to breakup.
with NDS this is about 450ms and a new ecm is required every 7 0r 8 seconds.
so i have my anticascading set to allow 3 different ecm requests from any given peer within an 8 seconds. I allow 3 because that gives peers a chance to channel hop.
if a peer exceeds this,he is punished by having the correct cw sent to him,but it is delayed by 450ms.
so it cannot be reshared.
This punishment is implemented for a period of 5 mins.
After which oscam then restores normal access again and monitors the usage for a period of 1 min.
if it exceeds again it is punished again.
the outcome of this is your card cannot be reshared by your peers unless you allow it to be.
DreamBoy69
15th May, 2011, 05:08 PM
some one plz give me basic info
1- which image is best for oscam ( plz provide link )
2- boxkey is must to put in ocsacm cfg (user or server what else)
3- Basic guides to share cline as local :D in oscam
i read alot of post but no one provide basic guide,thats y i need to postt this thread for newbies bcoz im too :P
I got this from another place. I am a noob but maybe someone can make what to do.
When you do please tell me in easy terms lol
:rulez:
Here are working configs for s*y uk using Oscam + CCcam 2.1.3.
Set 256 behind N line for cccam versions till 2.1.3 to get card as local!
oscam files can be found in folder;
/var/tuxbox/config (Enigma1)
/etc/tuxbox/config (Enigma2)
Edit the file Oscam.server file, add your boxkey and remove the #
This configuration blocks the killer EMM, if you want to get entitlements remove the blockemm from oscam.server
Oscam.conf
Code:
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.1.100
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000
Oscam.server
Code:
[reader]
label = slot1
protocol = internal
device = /dev/sci0
#boxid = yourboxid
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
Oscam.user
Code:
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
mtv1
15th May, 2011, 05:13 PM
Its depending on trust, and possibly a kink in payservers chain.
i thought thats why you use ccam alongside oscam , if oscam didn't have this flaw you would only use oscam standalone ?? yes ??
DreamBoy69
15th May, 2011, 05:15 PM
its here. you will need the 17 digit serial off the original sky box (barcode) NOT the serial given within the sky system on screen!
NDS boxkey generator (http://boxkey.exyucs.com/generator.php?lan=en)
Hope it helps someone. I still cant get unlimited viewing :banghead:
im usingCCcan 2.2.0 / OSCam 1.00 it works a treat on my subscription channels that I pay for including PICK TV
satsmo
15th May, 2011, 05:39 PM
I would steer clear of online BK generators.
satsmo
15th May, 2011, 05:43 PM
i thought thats why you use ccam alongside oscam , if oscam didn't have this flaw you would only use oscam standalone ?? yes ??
As said earlier look at anticasc as a means of some limited control. Or look at camd35 or go another proxy route, e.g. CSP.
There are many alternates each will have it's pros and cons. Look at tweaking a few things yourself and you may find a "balanced" set up.
Rodbouy
15th May, 2011, 07:42 PM
i thought thats why you use ccam alongside oscam , if oscam didn't have this flaw you would only use oscam standalone ?? yes ??
Well depends on how you see it as a flaw. Dare say pay servers wont like it. Oscam and cccam will still be shared if client has oscam. Although i was told by a member on here that a anti oscam can be used. But like said satsmo said try a few and do what works for you and only allow who you trust.
piopat
16th May, 2011, 02:04 PM
as satsmo said you should avoid online boxkey convertors ,you can download the boxkey convertor from my post on this thread http://www.digital-kaos.co.uk/forums/f39/sly-white-card-box-key-converter-v1-2-a-38896/index2.html
lincsat
16th May, 2011, 02:09 PM
My understanding is that you do not need a BK for OSCam, just leave that box blank.
piopat
16th May, 2011, 02:12 PM
yes the newer versions dont need the boxkey it auto detects the boxkey/caid etc ,but people using older versions may need the boxkey .
kopkidda
16th May, 2011, 09:15 PM
I have attached the screen shot of what happens when I go to run newcs(oscam). I followed all the instructions, downloaded latest version of oscam, installed newcs on dreambox and then replaced with oscam binary and chmod 755.
Put all 3 oscam files in var/tuxbox as told.
When I run newcs I get the following errors, says some files are missing.
Any ideas?
Rodbouy
16th May, 2011, 10:52 PM
I have attached the screen shot of what happens when I go to run newcs(oscam). I followed all the instructions, downloaded latest version of oscam, installed newcs on dreambox and then replaced with oscam binary and chmod 755.
Put all 3 oscam files in var/tuxbox as told.
When I run newcs I get the following errors, says some files are missing.
Any ideas?
looks like you dont have the oscam.server file with the reader info
/var/tuxbox/config/oscam.server
kopkidda
16th May, 2011, 11:02 PM
Ok could you let me know what goes into this?
When it says boxid, what is this?your boxkey?
Rodbouy
16th May, 2011, 11:09 PM
You dont need boxkey mate
oscam.server
[reader]
label = Card
enable = 1
protocol = internal
device = /dev/sci0
caid = **** change this for your card
fix9993 = 0
detect = cd
mhz = 500
cardmhz = 357
ident = ****:000000 # same as caid
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101
kopkidda
17th May, 2011, 09:05 AM
You see where it says
caid = **** change this for your card
What goes in here?
cgscott
17th May, 2011, 09:07 AM
The caid of the card you have. Card Idendity
0500, 0693, 093b etc
kopkidda
17th May, 2011, 09:17 AM
If it is a sky irish card, is that 093b?
cgscott
17th May, 2011, 09:56 AM
Sly UK and ireland 0963
kopkidda
17th May, 2011, 10:59 AM
Thanks, does your server config block emms?
Rodbouy
17th May, 2011, 11:43 AM
blocks unknown and global
kopkidda
17th May, 2011, 12:04 PM
Thats the job good man, so If I enter all details that I need to and put card into box channels should clear?
What sort of line do I put into receiving box then?
Rodbouy
17th May, 2011, 03:34 PM
If you have all the correct files in the correct places then yes.
Depends on how you setup your local.
Some using OScam with CCcam to help control it.
I use OScam with anticacs enabled and dvbapi enabled to help control and AU the card.
But by adding the user pass to oscam.users and in your say bedroom box add the cline as you normally would.
Just remember to enable the CCcam protocol to oscam.conf
kopkidda
17th May, 2011, 04:17 PM
I use OScam with anticacs enabled and dvbapi enabled to help control and AU the card.
But by adding the user pass to oscam.users and in your say bedroom box add the cline as you normally would.
Just remember to enable the CCcam protocol to oscam.conf
Thanks you have a PM
pem1
26th May, 2011, 08:59 AM
hi all could you please post the install file to manually install oscam&cccam on black hole image cheers m8
Rodbouy
26th May, 2011, 09:18 AM
if you read through this mate you will see a few configs then just google the oscam emu and you will get there.
davvo
26th May, 2011, 10:15 AM
hi all could you please post the install file to manually install oscam&cccam on black hole image cheers m8
you will find
oscam/cccam for blackhole image
post 98 below
http://www.digital-kaos.co.uk/forums/f39/oscam-cccam-2-1-3-a-198102/index7.html#post1054931
post 29 below for the config files
http://www.digital-kaos.co.uk/forums/f39/oscam-cccam-2-1-3-a-198102/index2.html
kennyboy
28th May, 2011, 10:54 AM
can someone pm this file or the file l would need for a dm500 pli img this isnt working now cheers
can this image be put on db 500s hd at the moment im useing nemisis but e2 svn 83 i have been playing with oscam but having some problems i will post my config in abit im trying to find a image that as them built in i like nemisis but i dont mind changeing images thanks
kennyboy
28th May, 2011, 07:47 PM
well ive been trying alday with different configs of ere this is what ive done but it still dont work
oscam config
[global]
Nice = -10
WaitForCards = 1
PreferLocalCards = 1
saveinithistory = 1
[monitor]
port = 988
monlevel = 4
nocrypt = 127.0.0.1
[webif]
httpport = 10001
httprefresh = 5
httpallowed = 127.0.0.1,192.168.x.xxx- (should this be db ip addy ) 192.168.255.255
[dvbapi]
enabled = 1
boxtype = dreambox
user = xxxx xxxxx
au = 1
oscam server
[reader]
label = slot1
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
caid = 0963
ident = 12000@0963:000000;12001@0963:000000
group = 1
emmcache = 1,3,2
oscam user
[account]
user = dreambox
pwd = xxxx xxxxx
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
any help please i want to keep cccam thanks
kennyboy
30th May, 2011, 02:55 PM
well every1 seems to be sleeping downloaded files from ere trying to use oscam but it seems to me know 1knows my answaers thanks
davvo
30th May, 2011, 08:16 PM
you dont NEED to muck about with different configs
the only configs you need to get oscam working with cccam
with your sly card are on page 2 of this thread
they are ready to go no need to edit
install oscam/cccam as 1 package on your box
download the configs put in them in var/tuxbox/config
put N-line in cccam cfg
restart oscam/cccam
thats it
the configs you posted 2 post up are wrong and will not work
you have the ident as the newcamd port and caid ???
you have dvbapi enabled and set up wrong
your not using dvbapi ?????
download the files on page 2
kennyboy
30th May, 2011, 11:53 PM
you dont NEED to muck about with different configs
the only configs you need to get oscam working with cccam
with your sly card are on page 2 of this thread
they are ready to go no need to edit
install oscam/cccam as 1 package on your box
download the configs put in them in var/tuxbox/config
put N-line in cccam cfg
restart oscam/cccam
thats it
the configs you posted 2 post up are wrong and will not work
you have the ident as the newcamd port and caid ???
you have dvbapi enabled and set up wrong
your not using dvbapi ?????
download the files on page 2
thanks for your reply im going to use them now i am useing nemisis 2.2 svn 84 i cannot find oscam/cccam on there downloads what i have downloaded is cardserver oscam_r4396 and useing cccam 213 i think ill google it cannot find it anywhere unless you can point me to it thanks
tjay78
1st June, 2011, 09:59 PM
Super now my also work...
Thanks...
bugaloo41
1st June, 2011, 10:17 PM
Wonder if anyone can clarify please.
Looking to block any possibility of updating entitlements to sly card
Am I right in thinking that adding this to your server config should do the trick:-
audisabled = 1
My set up is oscam and using dvbapi.
Conflicting reports some indicate that no need to block as it wont update - just wondering if anyone using similar set up can confirm.
thanks
bj1
2nd June, 2011, 10:13 AM
hi i have a tm500 i have tried oscam on ur image but does not open sports or movies reads everything else perfect does anybody know wich oscam file i can use on tm500 i dont want to share just want the ability to watch on my tm500 if anybody has such file could you post it to me and if possible how to manual instore....ftp thanks............BJ1
Rodbouy
2nd June, 2011, 10:34 AM
Wonder if anyone can clarify please.
Looking to block any possibility of updating entitlements to sly card
Am I right in thinking that adding this to your server config should do the trick:-
audisabled = 1
My set up is oscam and using dvbapi.
Conflicting reports some indicate that no need to block as it wont update - just wondering if anyone using similar set up can confirm.
thanks
just block all emms and in the webif click reader and tick disable AU.
On side note. Why ?
bugaloo41
2nd June, 2011, 05:11 PM
Cheers Rod.
Cancelled for the moment (Football ended) but still have 6 weeks until entitlements run out so thought that I would pop it in another box. Thought that when they receive final notification of cancellation they would take entitlements back to contract end date -is that not the case?
Rodbouy
2nd June, 2011, 06:24 PM
Ah so you trying to prolong the execution of the removal of the package.
I heard about that before not sure how successful they were are getting it to work. But you should be able to do it right up till they run out.
hannahbush
5th July, 2011, 01:42 AM
I know everyone will say this has been done to death but I have copied and pasted all the oscam files and even changed some slightly but it doesn't matter how hard I try Pick tv and the premiere channels won't open. I am using a dm500hd original and Newinigma image. I have oscam/cccam214 files and have shown them as below. I know I have the correct boxkey as it works in cccam and I have entered it without spaces. I am going mad not being able to solve this. PLEASE can someone help me.
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.169.1.100,192.168.2.2-192.168.2.100
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 12000@0963:000000;12001@0963:000000
[reader]
label = slot1
protocol = internal
device = /dev/sci0
boxid = xxxxxxx
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
[account]
user = user1
pwd = pass1
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
In cccam I have made sure that a # is at the front of every line except the one below.
N: 127.0.0.1 12000 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
PLEASE tell me what I need to amend to get it working.
davvo
5th July, 2011, 09:42 AM
in cccam info or webinfo
is
N: 127.0.0.1 12000 showing 1 card
hannahbush
5th July, 2011, 10:09 AM
I am sorry but I don't know how to find this info could you tell me how I find out
davvo
5th July, 2011, 12:13 PM
put your dreambox ip in pc web browser
replace x with the DM ip numbers
http://192.168.x.x:16001/servers (http://192.168.x.x:16001/servers)
hannahbush
6th July, 2011, 12:30 AM
Thats interesting. It shows 0 cards and yet I have the card inserted and the boxkey entered. I hope this helps you to tell what I have wrong in the settings.
davvo
6th July, 2011, 01:31 AM
install oscam/cccam as 1 package on your box
download the configs on page 2 put in them in
var/tuxbox/config
put N-line in cccam cfg
restart oscam/cccam
thats it
boxkey is not needed
hannahbush
7th July, 2011, 02:31 AM
I have tried all that you have said. I have downloaded from the addons in Newnigma the cccam214/oscam file which comes as one file. I have downloaded and used the config files shown on page two but when I do a restart I still only get the basic channels, no pick tv or the movies and sport. It still states that there are 0 cards in the web info. I have checked and rechecked and I am sure the information is exactly as shown on the downloaded files. It obviously recognises the card as ordinary pay channels work. It must be very near to working but something just not quite right. I hope you can give me some more help to get it working as it is doing my head in.
davvo
7th July, 2011, 04:02 PM
oscam is not reading your card
ftp into the dreambox with dreambox control center
find it here
http://www.digital-kaos.co.uk/forums/f39/adding-hard-drive-214040/index2.html#post1156097
once you have ftp in to your box
go to usr then bin
scroll down till you see cccam
tell me exactly how its spelt cccam_214 or just cccam
then scroll down till you see oscam tell me exactly how its spelt oscam1234 or just oscam
then go to usr then camscript
highlight oscam/cccam
right click edit
copy all thats in there and post it here
hannahbush
8th July, 2011, 01:29 AM
Under usr bin I have two CCcam files showing CCcam2_1_4 and CCcam2_2_1. Under Oscam it just says Oscam. The worrying thing is that I don't have a file of Camscript under usr. Sounds like I really do need some help. Could you help me in fairly simple language how to correct this please.
davvo
8th July, 2011, 09:38 AM
might be in usr/script
you will have to look a bit harder
you have to help yourself for me to help you
if the start script is not there or wrong its not gonner work
your cam script should look like this if thats how they are spelled in usr/bin
#!/bin/sh
CAMNAME="Oscam/CCcam2_1_4"
remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}
case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
remove_tmp
/usr/bin/oscam &
sleep 10
/usr/bin/CCcam2_1_4 &
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
killall -9 CCcam2_1_4 2>/dev/null
sleep 3
killall -9 oscam 2>/dev/null
sleep 3
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac
exit 0
hannahbush
8th July, 2011, 01:22 PM
I am sorry that I didn't find the file, I didn't realise it could be in another place. In script I have found the following file which I hope is the one you wanted me to find. You are the only person who is getting near to what is obviously the problem. Can you tell me what needs altering or should I put in the text you have shown. I am very gratefull for your help.
#!/bin/sh
########################################
###### Powered by NewNigma2 Team ######
### http://newngima2.to ###
########################################
# EMUNAME is only Display name for EMU Menu
EMUNAME="CCcam 2.1.4/OScam"
# CCcamversion
CCVer="CCcam2_1_4"
remove_tmp ()
{
[ -e /tmp/ecm.info ] && rm -rf /tmp/ecm.info
[ -e /tmp/pid.info ] && rm -rf /tmp/pid.info
[ -e /tmp/cardinfo ] && rm -rf /tmp/cardinfo
[ -e /tmp/ecm0.info ] && rm -rf /tmp/ecm0.info
[ -e /tmp/CCcam.kill ] && rm -rf /tmp/CCcam.kill
[ -e /tmp/$CCVer.pid ] && rm -rf /tmp/$CCVer.pid
rm -rf /tmp/*.info /tmp/*.tmp*
}
case "$1" in
start)
echo "[SCRIPT] $1: $EMUNAME"
remove_tmp
sleep 1
/usr/bin/oscam >/dev/null &
sleep 15
/usr/bin/$CCVer >/dev/null &
pidof $CCVer > /tmp/$CCVer.pid
;;
stop)
echo "[SCRIPT] $1: $EMUNAME"
echo -n "kill " > /tmp/CCcam.kill
pidof $CCVer >> /tmp/CCcam.kill
echo -n "kill -9 " >> /tmp/CCcam.kill
pidof $CCVer >> /tmp/CCcam.kill
echo -n "kill " >> /tmp/CCcam.kill
pidof oscam >> /tmp/CCcam.kill
echo -n "kill -9 " >> /tmp/CCcam.kill
pidof oscam >> /tmp/CCcam.kill
chmod 777 /tmp/CCcam.kill
/tmp/CCcam.kill
sleep 1
remove_tmp
;;
restart)
$0 stop
sleep 1
$0 start
exit 1
;;
*)
$1 stop
exit 1
;;
esac
davvo
8th July, 2011, 05:19 PM
try this
in usr/bin
make sure cccam is spelled CCcam2_1_4
in usr/bin
make sure oscam is spelled oscam
backup you cam script first
delete everthing in the oscam/cccam camscript
copy and paste the text below in your oscam/cccam camscript save and exit restart oscam
if that dont work edit the camscript to your other installed cccam CCcam2_2_1
save and exit restart oscam
#!/bin/sh
########################################
###### Powered by NewNigma2 Team ######
### http://newngima2.to ###
########################################
# EMUNAME is only Display name for EMU Menu
EMUNAME="CCcam 2.1.4/OScam"
remove_tmp ()
{
[ -e /tmp/ecm.info ] && rm -rf /tmp/ecm.info
[ -e /tmp/pid.info ] && rm -rf /tmp/pid.info
[ -e /tmp/cardinfo ] && rm -rf /tmp/cardinfo
[ -e /tmp/ecm0.info ] && rm -rf /tmp/ecm0.info
[ -e /tmp/CCcam.kill ] && rm -rf /tmp/CCcam.kill
[ -e /tmp/CCcam2_1_4.pid ] && rm -rf /tmp/CCcam2_1_4.pid
rm -rf /tmp/*.info /tmp/*.tmp*
}
case "$1" in
start)
echo "[SCRIPT] $1: $EMUNAME"
remove_tmp
sleep 1
/usr/bin/oscam >/dev/null &
sleep 15
/usr/bin/CCcam2_1_4 >/dev/null &
pidof CCcam2_1_4 > /tmp/CCcam2_1_4.pid
;;
stop)
echo "[SCRIPT] $1: $EMUNAME"
echo -n "kill " > /tmp/CCcam.kill
pidof CCcam2_1_4 >> /tmp/CCcam.kill
echo -n "kill -9 " >> /tmp/CCcam.kill
pidof CCcam2_1_4 >> /tmp/CCcam.kill
echo -n "kill " >> /tmp/CCcam.kill
pidof oscam >> /tmp/CCcam.kill
echo -n "kill -9 " >> /tmp/CCcam.kill
pidof oscam >> /tmp/CCcam.kill
chmod 777 /tmp/CCcam.kill
/tmp/CCcam.kill
sleep 1
remove_tmp
;;
restart)
$0 stop
sleep 1
$0 start
exit
;;
*)
$1 stop
exit 1
;;
esac
exit 0
hannahbush
9th July, 2011, 02:00 AM
I'm still no further forward. As I said in my earlier post I haven't got a camscript in usr/bin and found the file I showed you in usr/script. It didn't say camscript but said cccam2_1_4 and Oscam.emu. I can't see where to copy and paste the info you gave me other than in the in the same place i.e cccam2_1_4 and Oscam.emu. I deleted what was in their already and restarted but still no change, no Pick tv, sports or movies.
davvo
9th July, 2011, 10:33 AM
in usr/bin you have 2 files cccam2_1_4 and oscam ?
if thats right and they are spelled as above
then go to usr/script find the script for oscam/cccam
right click edit copy and paste the script 2 post up
save and exit restart oscam
the script will then look in /usr/bin and start oscam then cccam
EMUNAME="CCcam 2.1.4/OScam"
start)
echo "[SCRIPT] $1: $EMUNAME"
remove_tmp
sleep 1
/usr/bin/oscam >/dev/null &
sleep 15
/usr/bin/CCcam2_1_4 >/dev/null &
hannahbush
9th July, 2011, 05:52 PM
I have done exactly as you have said. The Ccam2_1_4 and oscam are spelt as you said. I have copied and pasted the text in usr/script after deleting te text originally in the file but still no change. I have pm'd you about trying to fix it.
davvo
9th July, 2011, 06:03 PM
you have the configs from page 2 in var/tuxbox/config ?
you have selected oscam/cccam and restarted oscam/cccam via the blue button ?
pull the card in and out ?
when you log in to cccam via the web info
doz it say at the top of the page
Welcome to CCcam 2.1.4 server
or
Welcome to CCcam 2.2.1 server
hannahbush
9th July, 2011, 06:56 PM
Yes done all that you have said. When I go into screen it shows as below.
Welcome to CCcam 2.1.4 server
Server connections: 1+----------------------+------------+-------+--------+----------------+-------+-------------------------------+| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |+----------------------+------------+-------+--------+----------------+-------+-------------------------------+|127.0.0.1:12000 | |newcamd| | | 0 | |+----------------------+------------+-------+--------+----------------+-------+-------------------------------+
danyperry571
10th July, 2011, 06:29 PM
hi guys im have problems setting up oscam+cccam on my dm500s i have darkstar11 image and have downloaded the addon and installed it here are my conf file ect
oscam.conf
Code:
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.0.1-192.168.1.255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 12001@0963:000000;10001@0963:000000
oscam.server
Code:
[reader]
label = slot1
protocol = internal
device = /dev/sci0
#boxid =
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
oscam.user
Code:
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963
cccam.cfg
N: 127.0.0.1 12001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
danyperry571
10th July, 2011, 10:59 PM
ok well i have got my box clearing pick tv now but dont no where to put my f lines for my other boxes and when i enter flines into the cccam.cfg i no longer get pick tv here are my conf files etc
cccam.cfg
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
N: 127.0.0.1 12001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.0.1-192.168.1.255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 12001@0963:000000;12000@0963:000000
oscam.server
[reader]
label = lower card
enable = 1
protocol = internal
device = /dev/sci0
caid = 0963:000000
boxid =
detect = cd
cardmhz = 357
# this helps the card run more smootly
group = 1
# Oscam has the concept of groups. Only users in group 1 can
# use this reader. I'm only using one group.
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
# these ensure smooth decrypting
lb_weight = 101
# for load balancing - can be commented out.
oscam user
[account]
user = test1
pwd = test2
group = 1,2
monlevel = 0
au = 1
caid = 0963
Rodbouy
11th July, 2011, 09:22 AM
For any one who is having problems using OScam and CCcam.
Just scrap CCcam, use OScam on its own.
Enable DVBapi in OScam.conf and add a account in OScam.user.
This will enable you to au the card.
Also just add you client boxes to OScam.user
Give client boxes same line they had, just enable the protocol they use in OScam.conf
All local setups ofcourse.
There is really no need to use the two of them IMHO
davvo
11th July, 2011, 10:54 AM
the problem with using oscam on its own is
if some peeps cant find and install oscam/cccam
then install the configs from page 2 then put a n line in cccam cfg
then restart oscam/cccam
which is so easy
how are they going to get on with setting up oscam
on its own which is so easy
but you have to use just a tiny bit of your brain
Rodbouy
11th July, 2011, 10:57 AM
I know what your saying but its just a option for people to use to try get it working.
piopat
11th July, 2011, 02:13 PM
ok well i have got my box clearing pick tv now but dont no where to put my f lines for my other boxes and when i enter flines into the cccam.cfg i no longer get pick tv here are my conf files etc
cccam.cfg
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
N: 127.0.0.1 12001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.0.1-192.168.1.255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 12001@0963:000000;12000@0963:000000
oscam.server
[reader]
label = lower card
enable = 1
protocol = internal
device = /dev/sci0
caid = 0963:000000
boxid =
detect = cd
cardmhz = 357
# this helps the card run more smootly
group = 1
# Oscam has the concept of groups. Only users in group 1 can
# use this reader. I'm only using one group.
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
# these ensure smooth decrypting
lb_weight = 101
# for load balancing - can be commented out.
oscam user
[account]
user = test1
pwd = test2
group = 1,2
monlevel = 0
au = 1
caid = 0963
dany in oscam.user you open an account for each f line ,so below the account you created for your self create a seperate account for each f line which will look pretty much like you posted above
[account]
user = (f line user name )
pwd = (f line password)
group = 1,2
iniqid = 1
caid = 0963
ident = 0963:000000
in oscam.conf protocol should be cccam ,and all you have in cccam.cfg is the n line delete the f lines ..
danyperry571
11th July, 2011, 07:38 PM
thanks for your reply piopat is this what the protocol should look like and should the version be set to 2.1.3 in the protocol which is my cccam version or 2.2.1 which is my client box cccam version
[cccam]
port = 12000
reshare = 4
ignorereshare = 0
version = 2.1.3
updateinterval = 240
minimizecards = 0
stealth = 1
piopat
11th July, 2011, 08:41 PM
just try it with protocol set as cccam and if you have opened a port port= that port number ,then add the user accounts in oscam.user . we need to be carefull here dan as we dont want to break forum rules ,try the above and see how you get on ,there are oscam config files and a cccam.cfg file in the last link of my signature which you can download and try (ive used them my self so they work but you will have to add user accounts etc ). by the way are you dan1985 on another forum ? if you are fintann will be able to give you good advice .
danyperry571
11th July, 2011, 10:24 PM
thanks piopat will give it a try yes it is me have been talking to fint but he does not agree that i should be using oscam+cccam and i dont wish to disturb anything that ive already done if you know what i mean
piopat
12th July, 2011, 01:25 PM
you can use either or both dan but fintann wont put you wrong ,there is not much he doesnt know about these things .
satphreak
20th July, 2011, 06:10 PM
Thanks for providing all help here - it's really help a newbie Oscam user like myself :)
piptaps
11th August, 2011, 09:30 PM
There is big problem with Oscam freezing caid 0963 card. Tried to over clock it but no joy. Its a dm500 darkstar image
How to get round this break up and freeze?
Rodbouy
11th August, 2011, 09:38 PM
What build of OScam are you on on what version are you using?
How many users?
piopat
11th August, 2011, 09:57 PM
There is big problem with Oscam freezing caid 0963 card. Tried to over clock it but no joy. Its a dm500 darkstar image
How to get round this break up and freeze?
a dm500s shouldnt really need to be clocked for using an 0963 card ,but you could try
mhz = 369
cardmhz = 369
piptaps
11th August, 2011, 09:59 PM
Version: 1.20-unstable_svn Rev. 5792
I have 6 Users but its totaly unwatchable. Constantly glitching and freeze for 5 seconds or so in every minute
I downloaded this from the darkstar 2 image
piptaps
11th August, 2011, 10:02 PM
The other thing is Pick tv is clearing ok when watching it from this dm500 but my friends are not getting it, screen still blank
piopat
11th August, 2011, 10:43 PM
change the oscam binary to a more stable version such 5400 .
Rodbouy
11th August, 2011, 11:03 PM
I am running stable 5775 1.10 and works fine.
You configs must have problems in it if 6 and its glitching.
I know that Oscam can handle up to 29 clients on a nds card with no or very little glitching.
Try sharing with OScam alone.
Rodbouy
11th August, 2011, 11:04 PM
here is powerpc-tuxbox old
75126
piptaps
12th August, 2011, 09:25 AM
How do i ftp this to the box? to which folders
Thanks
Rodbouy
12th August, 2011, 09:44 AM
goto var/bin and delete the OScam you have there,
Now rename the file I posted to the EXACT as the one you had in the folder( case sensitive)
FTP the new OScam in and chmod to 755.
Restart box.
Rodbouy
12th August, 2011, 09:47 AM
I would suggest you try OScam alone. factory reset box and flash with PLi Jade 3 then see here (http://www.digital-kaos.co.uk/forums/f39/oscam-log-file-221689/#post1208435) and here (http://www.digital-kaos.co.uk/forums/f39/oscam-log-file-221689/#post1208560)
Just add your local user pass to the OScam.user file.
southpaw
13th August, 2011, 12:03 PM
i still not got round to updating to oscam yet , just on cccam with no picktv ,what would give me a kick up the arse is this if possible
possiblity to configure oscam to cease sharing say after a client box`s channel has been left on for x amount of hours, and then begin resharing when channel changes.
i am pissed off seeing client boxes left on sometimes same channel for 36 hours , now surely nobody can watch the same channel for that long , therefore the boxes are being left on or in standby whilst not viewing tv.
my thoughts are when client turns on tv and sees blank screen , 1st thing he will do is channel change .and hopefully oscam will begin sharing again.
anybody know if this is even possible , or am i talking out my arse ...again !
baxalo
14th August, 2011, 07:39 AM
[newcamd]
port = 50001@0963:00000;50002@0500:00000
i want the rignt N line for cccam.cfg so i can read both two caids.
i use this
N: 127.0.0.1 50001 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 50002 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
but i don't now if is right.
piopat
27th August, 2011, 02:03 AM
if you want you can install oscam+cccam and delete the cccam side of things and just use oscam ,then all you need are the oscam configs and your away .no need for cccam but your client boxes can still use cccam .
jims
27th August, 2011, 03:26 PM
if you want you can install oscam+cccam and delete the cccam side of things and just use oscam ,then all you need are the oscam configs and your away .no need for cccam but your client boxes can still use cccam .
thanks piopat
will my oscam configs update my card or do i need to change
anything.
thanks again
jims
piopat
27th August, 2011, 04:24 PM
oscam can update your card ,but its probably wise to return the card to the sly box atleast once a month .
Rodbouy
27th August, 2011, 04:26 PM
Its fine just to AU on its own, Mine been in with OScam alone and not a single problem and thats with feed and with out a feed for testing purposes.
malkocoglu
4th September, 2011, 01:06 PM
hello friends,
I want use cccam / oscam on my dm800 with open pli image,
if I only use oscam as cardserver my locally card is read.
but if I activate Softcam cccam 2.0.9 and oscam as cardserver together, than works only cccam 2.0.9, oscam don't work, locally card are only read by cccam.
what is wrong can someone help me.
Satguy Keano
4th September, 2011, 02:38 PM
First things first I am not sure if CCcam209 can read 0963 card.
Also with Pli image ( and others ) there is a time issue with starting cardserver and emu.
Basically what happens is that CCcam starts before oscam has finished.
What I do is telnet to box and start oscam first and make sure its running, then open another telnet box and start CCcam ( Use 2.1.3 ).
Try it.
piopat
4th September, 2011, 02:41 PM
keano is correct you need atleast cccam 2.1.3 to read and view the channels on a sky card .
malkocoglu
4th September, 2011, 06:22 PM
First things first I am not sure if CCcam209 can read 0963 card.
Also with Pli image ( and others ) there is a time issue with starting cardserver and emu.
Basically what happens is that CCcam starts before oscam has finished.
What I do is telnet to box and start oscam first and make sure its running, then open another telnet box and start CCcam ( Use 2.1.3 ).
Try it.
me local card is canal digital seca 3
I will use cccam 2.1.3 to see if it will work
r1lad
9th September, 2011, 06:20 AM
Hi
I was hoping someone could help me. I have a DM500s with Nabilosat DM500 v.0.8 on it with CCCam 2.1.2 and NewCS 1.67. Everything works just fine. My only issue is that the entitlements on my card do not update and my understanding is that this is because I need 2.1.3 or newer CCCam. My issue is that whenever I try and install a newer version with NewCS attached, it just doesn't install the add-on. I was wondering if this was a consequence of not enough memory or something, and if you had any advice anyone might be able to give me.
Satguy Keano
9th September, 2011, 07:25 PM
If you don't have enough room in var then you wont be able to install it.
You need to delete something and then install CCcam_2.1.3 this will work on its own and update card but be warned PICK TV will not open with CCcam.
It might be idea to read up on oscam because its the future.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.