Epson SX125 waste ink counter reset

[johnnybeast]

Hey guys,

It took me ages to source a SX125 waste counter reset program that works, so I thought I would pop it on here.

I've uploaded it into the download section, but thought I may as well pop it on here with a bit of guide too.

I've only tested it on XP 32bit, with a UK SX125 printer, so that's what the instructions will be tailored for. By all means try it on other OS's and feel free to post results.

Reset instructions for SX125:


Install printer if not already installed.
Download and extract attached file into a folder on your hard drive.
Run 'AdjProg.exe' and click 'Accept' on the splash screen then click on 'Select' at the top.
From the pull down boxes, select 'Epson Stylus TX121' for 'Model Name' and 'ESP' for 'Destination', click 'OK'.
Click 'Particular adjustment mode' then from the '---- Maintenance ----' section, select 'Waste ink pad counter' then click 'OK'.
Click 'Check' on the bottom right, this will query the printer and give information of ink shots and so on.
Tick the two boxes on the left, 'Main Pad Counter' and 'FL Box Counter', then click 'Initialize'.
It should come up with a message abut restarting your printer, do it!

Job done, carry on printing!

I recommend getting a waste ink tank for your printer, have a Google for one, the waste ink pipe is easily accessible from a clip in hatch on the back of the printer.

Hope that helps, if it's useful, don't forget to thank :)
J.

-------------------------------------------------------------------------------------------
right, rubbish is still being posted to gain access to this file even after a warning, i will say this one more time, DONT KEEP POSTING RUBBISH TO GAIN ACCESS TO THIS FILE, keep your posts to questions or an answer to another post, THE NEXT PERSON WHO POSTS.....THANKS OR GOOD POST OR JUST WHAT I NEEDED OR ANY OTHER RUBBISH TO GAIN ACCESS TO THIS FILE WILL BE BANNED, YOU HAVE BEEN WARNED !!! DK STAFF

YOUR FIRST POST GOES HERE-----> http://www.digital-kaos.co.uk/forums/f2/

-------------------------------------------------------------------------------------------

[akramjef]

dear
does this software work on Epson stylus sx130
thank you:dong:

[johnnybeast]

Hello,
The reset program is just for the Epson SX125, but it might work for the SX130 as they are very similar. Other people have reported it working on the SX130. Give it a blast!!

J.

[bel3nebroso]

hello, I'm new here.. I was searching just this software because my sx125 doesn't recognize a cartridge (that is still with ink). I hope it will work :) thanks

[bel3nebroso]

I've done all the steps, but the problem is always the same :( black cartridge not recognized, but till yesterday it worked and the cartridge had some ink remaining...
Some suggestions?

[johnnybeast]

Suggestions:

1 - Are you using genuine or copy ink? If it's copy ink then theres a chance that the chip is telling the printer that the ink is empty or the chip has failed. Try changing the cartridge for a new one.

The reason for the 'not regonised' message instead of 'out of ink' message is the sophistication level of the copy chips, they will report the level of ink but when the ink is out it comes up with 'not recognized' even if there is still ink left in the cartridge. Clever huh?!

2 - The chip contacts in the back of the head could be corroded or bent, get a torch, take the cartridge out and have a look, if they are, pull the power out and clean or gently bend them back.

3 - Your printer's stuffed. I've seen it happen only a few times, the microprocessor that reads the chips could be faulty, time to give yourself a treat! A lovely new printer :)

Hope that helps, let me know! Always good to get feedback.
J.

[saidou24]

thank you very much i have sx125 and it work for me

[wanga]

Thanks so much! It finally worked after disabling my antivirus for a while. Please reach me on ( no addys :rulez: ) for more talks. Thanks once again.

[smiffy866]

Thanks! I'm hoping this will reset the ink pad counters, it's telling me I need to service because I've head cleaned so many times when installing a CISS

[kerv]

It took me ages too to source the same thing- im thankful to God that i finally bumpep onto one (A proven one most of of all). i hope to download it right away.

[tymoz]

i had a problem with my epson sx 125 but i hope you guys can help

[zagervbk]

does this helped anyone who has copy cartridge and not recognizing the black one ... does it helped??

[Canker_Canison]

does this helped anyone who has copy cartridge and not recognizing the black one ... does it helped??

No it won't. The black cartridge will have to be changed.

[akramjef]

dear Canker_Canison (http://www.digital-kaos.co.uk/forums/members/160459-canker_canison/)
thank you for this program ,i used it for my Epson stylus sx130
and it work fine .it reset waste ink pad counter to zero.
so this program can be used for Epson model:
ME320 , SX125 , TX121 ,and SX130
good luck.:hello:

[andy91]

Its ok using the program to reset your counter but the reason its there is to stop waste ink overflowing and spoiling your new carpet lol
Most waste ink gets held in a sponge so its worth trying to soak up any excess ink when you reset the counter.

Andy.

[akramjef]

dear andy91
there is small door on the back of the printer , if you open it you will find a tube which carry the waste ink to the waste pad, disconnect it from the pad and connect it to out side waste ink container ( do-it-yourself). this is what i did to my printer and till now there is no single drop of ink on the pad.
thanks:hello:

[thadeus]

thank you

;)

it is working
model sx125

a little pdf guide with images... :D
download here (http://www.sharepdfbooks.com/0VQSFTA3MSI4/readme.pdf.html)

[jacklee]

dose the resetter work
i have alot of epson resetters so if you need any inbox me with email

[gspeedy]

Will this work on SX110 or SX115 ?

[gmb45]

nearly 50 thanks posts have been deleted from here, please use the thanks button located bottom right of each post, thanks posts just clog up the threads and make them harder to navigate.and please dont post any crap they will also be deleted.it is also customary and polite on any forums to make your first post here---> http://www.digital-kaos.co.uk/forums/f2/

[renooshka]

dear andy91
there is small door on the back of the printer , if you open it you will find a tube which carry the waste ink to the waste pad, disconnect it from the pad and connect it to out side waste ink container ( do-it-yourself). this is what i did to my printer and till now there is no single drop of ink on the pad.
thanks:hello:
"connect it to out side waste ink container" where I dont understand?

[Canker_Canison]

"connect it to out side waste ink container" where I dont understand?

On the back of the printer is a small door.
Behind that door is a clear pipe that takes the waste ink to an absorbant pad.
Disconnect the clear pipe from the bottom connector
Gently pull the pipe outside of the printer
Either extend the pipe, or find a container that can reach the pipe, so waste ink will be collected outside the printer.

[wahrani31jackson]

dear johnnybeast
i'm trynig hard to download the file you 've posted but i can't do because it showing me a message that i have to wait ...or something i don't anderstand ...can you help me to download it ?? thank you much !

[wahrani31jackson]

i tried to download it ...but it doesn't want to get me the file ...could you help me to download it ?? thank you !

[smirnoff_rules]

dear johnnybeast
i'm trynig hard to download the file you 've posted but i can't do because it showing me a message that i have to wait ...or something i don't anderstand ...can you help me to download it ?? thank you much !

wot part of ( i have to wait ) is the problem .. give the server time to update u as a new member, and stick around m8 . theres thousands of things on here to learn

[mayhem2008]

Looking for a way to reset my SX125 Printer. Tried a few programs but no luck yet ;-(

[feyizu]

dose the resetter work
i have alot of epson resetters so if you need any inbox me with email

Hii, dear;
I have an Epson SX425W printer and looking for waste ink tank resetter..If you have this can you send me.
Great thanks for your effort in advance.
Please send it to:

( no addys :rulez: )

[ivanvk]

hi i have a problem with epson sx 125. after changing cartridge there is still a notice that the ink is empty. can you please tell me which program i need to use to reset my epson. sorry for bad english... thanks!

[Canker_Canison]

hi i have a problem with epson sx 125. after changing cartridge there is still a notice that the ink is empty. can you please tell me which program i need to use to reset my epson. sorry for bad english... thanks!

You don't need to reset the printer, you need to remove the cartridges & wipe the chips before putting them back in.

If that don't work, take them back to the shop.

Compatable cartridges don't always work.

[epsonsx230]

Hi !
I saw that already works on SX125 and SX130.
Does this software work on Epson Stylus SX230 ?
Thanks in advanced.

[Stefimkd]

can it reset catriges?

[Zorgusinho]

It works with my sx125 thank you a lot

[clockworx]

Hi it seem the moment you get the "ink cartriadge not recognized" the only way to print will be to replace the cartridge? Am I correct?

[Kjara]

I have problem with the Epson SX 130 and I am trying to download this file but than I get some message that I have to post something or to wait. I have been register here on hour ago. I have to wait or? What to do, what is the problem,can somebody help me. Thankssssssss:)))))

[Mikete]

OK, I have SX125, i need to download the file. It is everything. I hope this program works... I am getting mad. (Sorry for my bad English, i'm from spain, tell me when i say something wrong please)

[micalit]

I would like to knw if this software works also with the sx130

[tasurmata]

i cant open rar i must have a problem.. :/

[tasurmata]

hello guys i have a prob .. i have epson sx 125 at start didnt recognize the yellow cantridge i bought new after didnt recognize the black bought new now i open to printer i can scan everything but i cant print i go to see how my inks is and it looks like i have closed my printer i didsetup again nothing i used the rar soft nothing again ..... :/ whats wrong>????? too many problems with this printer...i have almost one and half years this printer its time to buy new or not ...please help me ..thx

[Canker_Canison]

hello guys i have a prob .. i have epson sx 125 at start didnt recognize the yellow cantridge i bought new after didnt recognize the black bought new now i open to printer i can scan everything but i cant print i go to see how my inks is and it looks like i have closed my printer i didsetup again nothing i used the rar soft nothing again ..... :/ whats wrong>????? too many problems with this printer...i have almost one and half years this printer its time to buy new or not ...please help me ..thx

It will be a dodgy cartridge. If the yellow wasn't recognised, change it. If another ink then fails, change it.

It can be a very common fault with copy inks.

The reason you can't print is due to the ink problem.

[tasurmata]

all my inks are new and full i bought them almost 30 euro my inks maybe isnt genuine but i ve never had problems like this before every type of inks if i was using before...... . 50 euro costs my printer which had genuine inks free enclose in package 40 euro costs the package with 4 inks genuine ...
better see what i mean ....128074
ty for help my friend



It will be a dodgy cartridge. If the yellow wasn't recognised, change it. If another ink then fails, change it.

It can be a very common fault with copy inks.

The reason you can't print is due to the ink problem.

[Canker_Canison]

all my inks are new and full i bought them almost 30 euro my inks maybe isnt genuine but i ve never had problems like this before every type of inks if i was using before...... . 50 euro costs my printer which had genuine inks free enclose in package 40 euro costs the package with 4 inks genuine ...
better see what i mean ....128074
ty for help my friend

The image is a bit small for me to read, and I'm guessing it's not in english. I'm not good with foreign languages... a little french & german.

Take out all the inks. Lightly rub over the chips with a pencil rubber. Put them back in (make sure you put them in their correct slots).

At that price they should be original inks, it's rare for originals to fail. But it's not uncommon for cheap printers to fail. If it costs the same to buy the inks as it did the printer, it's classed as disposable to most users.

[tasurmata]

the position that i want to see is how the inks seems about the language now the window says informations about page (how to print) it is not something important for our problem the language around ...the unusual is that the half inks saw that is empty and the other half gray like error ..... and i start having problems with scanner too ...appear them black and the automatic scan dont work...too many problems now ...its time to buy new i think ....i did what u said ....but i ve the same problem. any idea ?? :/


The image is a bit small for me to read, and I'm guessing it's not in english. I'm not good with foreign languages... a little french & german.

Take out all the inks. Lightly rub over the chips with a pencil rubber. Put them back in (make sure you put them in their correct slots).

At that price they should be original inks, it's rare for originals to fail. But it's not uncommon for cheap printers to fail. If it costs the same to buy the inks as it did the printer, it's classed as disposable to most users.

[Canker_Canison]

the position that i want to see is how the inks seems about the language now the window says informations about page (how to print) it is not something important for our problem the language around ...the unusual is that the half inks saw that is empty and the other half gray like error ..... and i start having problems with scanner too ...appear them black and the automatic scan dont work...too many problems now ...its time to buy new i think ....i did what u said ....but i ve the same problem. any idea ?? :/

Take it to a shop, NOT PC World! And ask them to check it.

New inks might solve it, but a decent shop will tell it straight... New inks or trash it.

[tablouj]

hi my printer sx125 ask to replace yellow the 4 cartridge are fine any one can tell me what happened to this printer !!!!!!!

[Canker_Canison]

hi my printer sx125 ask to replace yellow the 4 cartridge are fine any one can tell me what happened to this printer !!!!!!!

Yes, you used all the yellow ink. Or it's got a bad connection or duff chip.

[somnis2012]

is the file still downloadable?

[husmute]

Why do some waste ink counter reset programs require key?

[quang19]

Hmm, anyone know if this is working on Windows 7?

[dabidoff]

I have a CISS in Epson SX130 but now I have a problem because the ink is wasted. How can I rset the printer?

[madimatache]

I have a Epson Stylus S22, this program work for this printer?

[keksoft]

Posts: 14 (http://www.digital-kaos.co.uk/forums/search.php?do=finduser&u=308143)
Thanks: 0
Thanked 3 Times in 2 Posts
Downloads: 0
Uploads: 0

http://www.digital-kaos.co.uk/forums/images/styles/digital/reputation/reputation_green.gif


http://www.digital-kaos.co.uk/forums/images/icons/icon1.gif epson stylus sx130
dear
does this software work on Epson stylus sx130
thank you:dong:

[akramjef]

Posts: 14 (http://www.digital-kaos.co.uk/forums/search.php?do=finduser&u=308143)
Thanks: 0
Thanked 3 Times in 2 Posts
Downloads: 0
Uploads: 0

http://www.digital-kaos.co.uk/forums/images/styles/digital/reputation/reputation_green.gif


http://www.digital-kaos.co.uk/forums/images/icons/icon1.gif epson stylus sx130
dear
does this software work on Epson stylus sx130
thank you:dong:
YES IT DOES, it works on Epson stylus SX130

[andy91]

How can I download the attachment?

Try introducing yourself in the correct section and you might get the privilage.
Introduce Yourself (http://www.digital-kaos.co.uk/forums/f2/)
Forum Rules (http://www.digital-kaos.co.uk/forums/f5/)



Andy.

[PrinterMAN]

thank you for the software < Also if you have software for
SX130 , can you post it??

[Rupertoid]

Thanks so much! It finally worked after disabling my antivirus for a while. Please reach me on ( no addys :rulez: ) for more talks. Thanks once again.

Which antivirus you were using? Mine Avast didn't complain anything

[spudgun001]

wow new ink, quick clean and it asks to install new black ink. epson slap slap!

[Glook801]

I bought a cyan Epson cartridge and it doesn't work (not recognize). I hope this utility will help me.

[Canker_Canison]

I bought a cyan Epson cartridge and it doesn't work (not recognize). I hope this utility will help me.

It won't, if it's a compatible cartridge it needs returning as the chip is buggered.

[eagleflh]

go here to purchase an external waste ink tank for your epson

http://store.auctiva.com/bos_dsl (http://store.auctiva.com/bos_dsl)

[fiesta91]

my epson sx 125 is not printing enymore help

[snIP3r]

hope this fixes my problem, that the black cartridge will not be accepted...

[pumasoft]

wish to download and give it a try as my printer change to sx125??

[coolmirafiori]

this application may is valid for compatible cartridges? Im desesperate, my sx125 says that doesnt recognize them, but before did it.

[zenkkor]

This works on the sx130.

[stuart1985]

dose the resetter work
i have alot of epson resetters so if you need any inbox me with email

are these still available as i need one for the sx425w,

thanks in advance

[Edrop]

hello ... I also have a problem with my epson sx 125. When the cartridges arrive in half, says the printer that are already empty. I wonder if that program can not start the print cartridges and continue printing. If not I'm always buying ink unnecessarily. Thank you.

[glcgsm]

Hello there,

Any clue, it works also for sx115 ?

Thanks,

[Michael0610]

"does this helped anyone who has copy cartridge and not recognizing the black one ... does it helped?? "

Does anyone know if it vill it help if I bye a chip-resetter for this problem?

[gesseg]

im having the same problem with my sx130

[Miss Marples]

Thanks for the utility software... I hope it works...

(These huge corporations think they've got us by the short and curlies, but we're not as soft as they think we are)

[Miss Marples]

Big thank you to OP... This advice and program works to reset the waste counter on the SX125... :-D

[utente83]

i have epson sx 130 and it don't work....

[cjohn]

hi guyz, my epson sx130 is asking for ink pad resetting, what should i do get that software.. plis help
:afraid:

[cjohn]

the program is working with epson sx130
but you have to select epson stylus tx121
as your model. good luck...:p

[cjohn]

i tried with win7 32bit but did not work.
i used win xp32bit

[michael s]

I downloaded and extracted the files into a folder, however when I click select no drop down option appears.
any ideas??

[pipah18]

finally i found a way to use my epson sx130 again! my magena, black and yellow inkpads are full but my cyan are almost empty (3%). and for that reason i can't print neither in black and white. it sucks :(

[Drizzl]

My sx130 eat ink like my car cal gasoline, so i was thinking that what is up to this crap.. i opened one "empty" ink chartige, and it was half full of ink. I really hope this works. :)

[armourer]

Hi guys, does this work for TX110?

[sickdoctor]

I have an epson sx130 that lately wont recognize copy cartridges that i have used for the last 2 months without a problem. Now the printer only works with original epson cartridges. What can i do to have copy cartridges recognised again?

[kazeze]

thunk you
have an epson sx130 that lately wont recognize copy cartridges that i have used for the last 2 months without a problem. Now the printer only works with original epson cartridges. What can i do to have copy cartridges recognised again?

[malomon20]

hi! IS THIS COMPATIBLE WITH EPSON ME340? THANKS.

[mneral4]

dear
does this software work on Epson stylus sx130
thank you

[paulwwjd]

I am getting this message on my epson sx125 The printer's ink pads are nearing the end of their service life. Please contact Epson support. I doubt the pads need replacing. How can I reset the counter?

[johnnybeast]

To all the new people on here, thank you for joining, but...

Firstly, read the forum rules.

Secondly, read posts provided by other users, once you're satisfied theres not an answer there to your query, then post a reply :)

Yes this software will work on the SX130, I haven't tried it, but other users have posted positive results, so give it a go!

To reset the SX125, read the first post of this topic that I posted, there's a pretty comprehensive guide on there. Read it and try it, if it works, press the 'Thanks' button at the bottom of the post. Simples.

So far this software and guide has been tested on SX125 and SX130. It probably won't work on any other Epsom printers.

J.

[omnia92]

why give me Ink out error on SX125 ?

[Dubbyrainbows]

Would this work with SX235?

[Batat]

Let's see if this work for me, for some reason it doesn't see original epson cartriges.

[RACEDRIVER]

hy Andy....im new member....i have same problem on sx 130 printer....black is low always....i replace a 3 new black ink and same thing.... i see that problem can be solved.....did you maybe know how..... thank you.....

[arlt]

i thought the program adjProg would be useful, but it turned to make more problems

i have sx125 but now the printer says it is tx121

under adjustment, i tried eeprom data copy and initial setting

does anyone knows how can i turn back to sx125?

thanks

[thebrookster]

Well, I shall give this a shot.

Must confess printers annoy me know these days, they don't like cheaper cartridges, and claim they are out of ink when they clearly aren't!!

Many thanks to the OP for the program!!

[nickmuteti]

I ma stranded here. am getting a warning message that my printer requres servicing. what shall I do?

[salimsimo]

oes this helped anyone who has copy cartridge and not recognizing the black one ... does it helped??

[Epson sx]

Seems I have the same problem sx130 with compatible ink. Black does not work. Does a hardware resetter help? or changing the type?

[west1es]

Hi, just downloaded and followed the instructions and it worked first time on my SX130, many thanks

[alfa78]

inc counter reset?

[borozg]

This application does not have drop down boxes. !! help
This problems I have with my epson , are telling one thing. Never again buy epson .

[xardas145]

It doesn't work. When i open the instalation, my computer is reseting. Somebody knows what heppend?

[lutet]

Does it work on Windows 7?

[hoooligan]

Does it work on sx 130?

[wamahium]

how do i reset my epson wf-7015? without using a key.

[Rup Pharm Ltd]

Epson sx125 The printer's ink pads are nearing the end of their service life. The printer has locked down

I have the same problem as the others & trying to download the Sx125 tx121 file - hope it works!!

[Mikemdm]

Can it be used on the Epson P50 also?

[Canker_Canison]

Can it be used on the Epson P50 also?

I have alreadt posted the engineer software for the P50 in it's own thread.

[vbleacha]

hi pliz help me with epson sx13o resetter

[magnus3m]

Is it work for sx 125 or not, i need to know before i crash something

[mteor]

Hi, a will try to reset ink counter in Epson Sx130.
Already tested in this model? work?
Regards

[novak100]

Do You think guys this file would work with sx115?
I know you mentioned it works with sx125 and sx130 but sx 115 it is quite similar to sx125. Does any one tried it before?

[akineton1968]

epson sx-125 olur mu?

[thermadyne]

Hope i can download this software soon too as my sx130 which I have on ciss has decided to reprt that the waste ink needs resetting... has anybody had success on the sx130 with it?

[barchitiello]

good for sx130??

[barchitiello]

I have a huge problem ... I did the initial setting SX130 ...
is now a tx121 and no longer reads the cartridges ... help me please
as a return back?

pleaseeeeeeeeeee

[barchitiello]

I have a huge problem ... I did the initial setting SX130 ...
is now a tx121 and no longer reads the cartridges ... help me please
as a return back?

pleaseeeeeeeeeee

nobody can help me?

[virussssss]

So does it work on the SX130?

[neelkamal]

hot to reset epson stylus tx121

[kaukowsky]

Does this thing works on Epson Stylus sx130 ? or only for 125?

[hvarsani]

How does this program work? Trying to use a CISS on Epson sx130, does no recognize the CISS even the old cartridges now, no idea what to do. Will the program just reset the printer and let it take the CISS?

[mismichal]

does it works on win 8 64 bit??

[lk1234]

you can download it

[maskoczek]

Is it works with S22?

[mkebbs]

My printer Epson SX 130 can't recognize CISS. Yet it used to like one week ago

[onlyonce]

hi having problems with this printer so will be trying the file amd confirm results

[lbgli]

The reset program is just for the Epson SX125 and otherwise ?

[ceve]

Hello! I am new to this forum. I am posting because, similar to these folks here, my ink cartridges are new and yet the Epson sx125 suddenly won't recognize them anymore. This is a program to reset the print head somehow? Thanks!

[ceve]

Hello again,

I have a macbook pro and was interested in downloading your adjust program. Since it is a windows program, I opened it on my mac with crossover. The screen with accept/decline came up. I pressed accept. Then when I pressed select on the next screen, nothing happened. Any advice?

Thank you, Ceve

[specfreak]

Thanks for the link. I got my son an Epson SX 130 and it's irritating me a lot that the ink carts keep registering as empty. You can shake them and hear the ink inside. I just hate the restrictions these printer manufacturers are putting on printers. Will give the util a go. I also saw WIC, but for the price it might be worth buying a hardware chip resetter which can be used multiple time.

[Canker_Canison]

Hello again,

I have a macbook pro and was interested in downloading your adjust program. Since it is a windows program, I opened it on my mac with crossover. The screen with accept/decline came up. I pressed accept. Then when I pressed select on the next screen, nothing happened. Any advice?

Thank you, Ceve


Best solution.... Throw away the mac & get a real pc.
second solution.... If it's got an intel chip you can dual boot windows.
third place... borrow a laptop.


As to everyone posting about cartridges not working.

Buy better quality inks. Or try rubbing the chip with a pencil rubber.

[rasher12]

dear
does this software work on Epson stylus sx130
thank you:dong:

[carlosp]

My epson SX 125 need to reset can you help me please?

[kutxi]

My printer is only one year old and I?m looking for somthing that resolves this ink problem... I'm wasting a lot of money in ink and I'm tired. I'll try your solution.
Thaks!!

[Possivito]

Hello, It's already working? I'm looking software for my sx125 but I think will must buy new cartridge's. Ehh :/

[rehanmolu]

thank you for the hard effort have been waiting for this for so long.

Does any one have waste ink counter reset for other epson model - i have px660 tx730 tx720 please help

[jayjaymiss]

Epson style sx130 disatisfied me. Black Ink cartrige is unrecognized. This always happen when ink level in cartrige is low. Maybe resetting ink counter can help me?

[cardi94]

Hi all,

I have downloaded your little program for my epson SX130.
Indeed, the printer doesn't want to print anymore because the black and cyan cartridges are "empty". But the last page printed was in good quality. So I assume the black one is not totally empty...

With your software, I have correctly re-initialized the waste ink counter (now it's written "0%" on the counter).

But the printer still doesn't want to print because the cartridges are empty. Have you a solution for me?

Thank you,

MC

[Canker_Canison]

Hi all,

I have downloaded your little program for my epson SX130.
Indeed, the printer doesn't want to print anymore because the black and cyan cartridges are "empty". But the last page printed was in good quality. So I assume the black one is not totally empty...

With your software, I have correctly re-initialized the waste ink counter (now it's written "0%" on the counter).

But the printer still doesn't want to print because the cartridges are empty. Have you a solution for me?

Thank you,

MC


This may sound a bit too obvious....

Change the ink cartridges. If there's no ink registering it won't print.

Only non epson cartridges will run till empty.

[Willekille]

How is it on win7 sx130?
Is it working?

[maneken25]

is there any downside of software if other tints are full and only black compatible tint isnt recognised?

[Canker_Canison]

is there any downside of software if other tints are full and only black compatible tint isnt recognised?


This software should only be used if the waste ink pads are full.

Attempting any other repairs with this software could damage your printer beyond repair.

If your printer doesn't recognize one or more ink cartridges, you need to clean the IC chip on the cartridge or change the ink.

[juraj1986]

Hi, hope it works, I just cleaned my epson head (clogged pretty bad) an inks are making a problem, why is that, maybe because the printer doesn't apply non original ink tanks???

[Gangstermn]

Is there software for SX610FW model?

[trevice]

I hate that Epson us to use these programs to properly use their printers.

[DamianGto]

I hope this will work.
My biggest mistake was to buy the sx130 printer.
I use to have HP and it is very easy to refill and they last much much longer.

[giedrim]

is this sofware compatable with Epson L100?

[Canker_Canison]

is this sofware compatable with Epson L100?


New thread created with reset tool

[feghio]

Hello, I followed the procedure and the printer worked again, but damn, after 3 prints, stopped again giving the same problem as before. I repeated the procedure again and again started to work. but my question is: Is there a way to prevent the printer hangs forever, and thus I am forced to repeat the same procedure?
thank you very much :)

[KrockOss]

Does it work for SX130 ?
Thanks

[topjazz]

Hello,
I just bought 1 original epson cartridge (yellow), and replaced it.
After replacing it, all cartridges are disabled.
I must say in the past i used also compatible cartridges.
I've tried everything (power off for a while, desconect from pc, etc...), nothing helps...
I hope the epson sx125 waste ink counter tool will help...
Greetings,
topjazz

[gallone]

hello fdhgdfhgd

[qgerce]

Hi, it's a great software! Thanks!

[Zouhair]

i had the same problem with my epson sx 130 , i hope that it can help

[Canker_Canison]

Hello,
I just bought 1 original epson cartridge (yellow), and replaced it.
After replacing it, all cartridges are disabled.
I must say in the past i used also compatible cartridges.
I've tried everything (power off for a while, desconect from pc, etc...), nothing helps...
I hope the epson sx125 waste ink counter tool will help...
Greetings,
topjazz


It's a duff cartridge, go and get it changed.

THIS SOFTWARE WILL NOT FIX CARTRIDGE PROBLEMS

[topjazz]

Hallo,

thanks for the answer, Canker_Canison !
the software (epson sx125 waste ink counter tool) did not work, because all cartridges must be active.
the yellow cartridge have i replaced with a compatible one, and it's work again
after repacing the yellow cartridge the software (epson sx125 waste ink counter tool) works, but i have not enough knowledge to work with it (it's english, maybe there's something in dutch ?)

Greetings,
topjazz

[geniusjames]

Do it works for stylus sx235w?

[mpakolas]

Hello people! I have an Epson sx125 and i tried to reset it through an application called ssc service utility. the problem is that this application is not compatible with my model. I am running win7. Do you have an idea in order to reset my printer?

[Unk]

Thanks for the tool.

As told before, it won't work if there is already one cartdridge with problems/not recognized.

I guess I'll get a black one original and then the procedure for using compatible cartdridges should work with no problems at all.

Also, I'd probably apply for a CISS system avoiding wasting time and money with expensive (ratio ink/price) cartdridges.

[nick162]

hi does this sofware reset the sx235 printer

[AminmB]

Thx dude!
Do you have reseter for px660?

[Petre]

do I need a code to reset the printer ink counter?

[stawa]

i did try to take out all ink (non original)cartridges for few minutes,disconnect printer from comp and mains,and install them again.didn't work for me.now will try soft posted here

[rumun13666]

will it work after refilling cartridge with needle by myself?

[yatata]

Thanks. I'm going to try it.

EDIT: I have tried it but my problem has not been solved. My problem here is that I have two new cartridges (compatible ones with auto-reseteable chip) and the printer says it doesn't recognize them (cyan and magenta). Do you know what could be happening here? I have tried different cartridges but the result is the same.

[dubeu]

I still dont understand why Epson is doing this. It is so unfair that I have to buy new blue color. I dont use blue but is is draining. I only use black..

[Canker_Canison]

Thanks. I'm going to try it.

EDIT: I have tried it but my problem has not been solved. My problem here is that I have two new cartridges (compatible ones with auto-reseteable chip) and the printer says it doesn't recognize them (cyan and magenta). Do you know what could be happening here? I have tried different cartridges but the result is the same.


The cyan & magenta chips are faulty & need replacing.

[fireman1904]

why do we need to reset the ink, they said that may pad ink end of service :t

[emy1982]

help me, my epson sx130 don't see black color original

[liocasio]

i have epson sx 230 please help me a need adjprog for reset

[wd24]

in myy sx130 printer, 3 non original gardriges fail after i used 1/3 of them capacity.(yellow, blue, magenta)
is any software to reset cardriges in sx130?

[mokhtari mohamed]

Hey brothers
I need reset program for my epson sx130
please

[strawinski]

I have currently the same problem since my driver update for the sx125. I use JETTEC inks that worked so far. Is there maybe a timer in the epson software that stops the funktion of the ink after a certain time?

br

[gius]

with this application I print in black without color cartridges?

[ThePsychodreams]

does this work for sx130?
i should try this

[cezary806]

Oh, now I got this! Thank you! I've got original cardiges, they might be able to print about 50 pages, but something got wrong and printer thinks that black one is empty! But ink is literally flowing out!
One more time: Thank you very much :)

[lupen72]

hello excuse me for my english
but the program doesn't work
i have a epson sx125 and vista
when i click "check" no result
epson original or compatible?

[dodofeky]

Hi quys.I have problem with my SX 125. It cannot reset the cartridge

[Zozi04]

Hi all !
I have an EPSON SX130 and i had an ERROR. After I changed cartridge(not the original) it sent me ERROR. But I don't really understand cause that's not the first change and none of the new cartridges were original. I don't know what can i do now ? :S I read the older comments and I think this program may help me.
Any idea ?

[arksop]

hi,

is this work with sx130?? or not?

[frumushelu]

hi there. do you guys have an ideea if the reset aplication from the first page is working for epson stylus S22? I am having a lot of bad times trying to reset my ink pads.

[Mankind]

I have epson sx 130 it oly 1 yr old, and i now everytime i print it's showing me that printers ink pads are out of their service life and needs repairing, i hope this utility will fix it.

[eisvleo]

Thanks to attach the Engineers Software

[jamesik]

I must reset pampers.Can you help me??

[ZSNUTTER]

I take it this still works with the SX 130?

[gmb45]

I must reset pampers.Can you help me??

pampers :hmmmm: they pt pants aint they ?

[d3ni3lson]

any suggestion which type of printer is compatible in the list of ssc reset utility with sx130?
Thanks

[naug]

Thanks. does it work for SX425W ?

[lloyddjdannyboy]

HI. Anyone tried this sx125 rest tool withthe sx130 ?

[andyetitmoves]

added all new epson inks and it still doesn't recognize them. any suggestions?

[BAJOU25]

hi, I recive msg main board cannot be used

[gmb45]

to all

please dont keep posting crap to gain access, all it takes is one decent post here---> Introduce Yourself (http://www.digital-kaos.co.uk/forums/f2/) then you can have what downloads you want, the staffs job is hard as it is with out having to delete crap that is posted in this one thread alone. thanks.

[stefanmv]

Is this program working for SX125 ?

[erebus]

For all you guys needing waste ink reset utility go to this Epson link
https://ipr.ebz.epson.net/ipr/maintenance.do
this software is provided for free for USA and Canada but not for Europe

just find the corresponding printer model
for example:

SX420 corresponding to NX420
SX515W SX510W - NX515 NX510
Stylus Photo PX - Artisan

and so on

email and Serial Number of your printer required
after completing all field click on "get activation key"

short after you going to receive a email with download link and activation key

[epson printer]

Hello!

Epson SX125 printer is, at which there was a problem. I will cut to cushion filled with ink. I read it to the counter to zero, but can not find software. I ask for your help to offer for a solution. Thank you, Rami

[rommy78]

do you know if it works on a epson sx 105? or epson sx510? thank you

[malvlex]

Hm didn't work for me. :( Is there any possibility to reset it to the previous settings? Because now my SX125 doesn't recognize three of four cartridges anymore. Previously it was only one which wasn't recognized.

[gmb45]

This is another thread where a lot of rubbish is being posted to gain access to the files, please keep your posts to questions/answers etc.

Rubbish posted to gain access to files will be deleted and bans or infractions given out.

If your new to dk please read the rules before posting>>>> forum rules (http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/#post2) and your first post goes here>>>> Introduce Yourself (http://www.digital-kaos.co.uk/forums/f2/)

A decent introduction post is not much to ask in return for what files you want now is it.

After you have posted in the introduction forum, 15 minutes or so later you can download any thing you want.

Please help us keep the forums clean and tidy by not posting thanks, just what i need, etc etc etc as these clog up the forums and make hard to navigate.

A lot of time and effort and expense in some cases is put into threads on DK please dont spoil them by posting rubbish.

thanks

DK staff :)

[Canker_Canison]

This software does not fix cartridges not being recognized


This software is only for resetting the waste ink pad error




If the printer is not recognizing inks it is either due to the cartridge chip reading empty, or the chip is faulty.

Replace the cartridges!

[fr3nzy]

i have a problem with my epson sx130 and i hope you can help me.

[Coiz]

My black cartridge shows up as not recognized. It is not original, but the tech said that it would work fine... I'm going to try this to see if this solves the problem.

[kreativetech]

i have the epson p50 resetter for anyone who may be interested

[kreativetech]

thanks for the resetter i have been searching for it for a long time. do you have access to the one for epson px660. thanks

[gmb45]

1 post in the introduction forum is all its takes

dont keep posting thanks etc !!!

[yacine088]

hi

i m new in this forum and i realy need help

i have an epson sx130 multifunction printer that needs to be resettted

i need ajprog to do so but i can t find it

can you help me?

thank you

[fringes]

The number of cartridges of SX125 in Europe is T1281 - T1284. It's same number in Asia TX125 etc?

[littlepig]

Hello guys. For people having problem with cartridges (getting the message "cartridge not recognized"). I assume you check the integrity of the cartridge and take care of set it properly in place. Sometimes you should only remove the cartridge from it's place and put it back in. But you shoud always take care, if you use wether original, compatible or resetable cartridges, not to mix them. You should replace all 4 with same type. Of course, unfortunately there is a chance for the cartridge, or the printer itself to be faulty.
As for the program I can tell you it really works.

[alexteamwr]

have anyone test this tool for sx 230 ?

[drif]

how to reset my sx 125 i am new her in this forum i need help

[sayebun]

Hi
I have problem with waste ink counter massage, I dont know that sx125 software work with sx210 ! How to use this software ?

[josipetric]

hi, my sx130 doesn't recognize a black cartridge, it is a copy ink, help

[Moijetaime]

Too bad.. I just wanted to let you know that for me it didn't work. I couldn't fix the problem with my SX130 with the help of this problem. Thanks anyway and good luck to everyone!

[verrnum]

is working same with sx 218 but the soft is different

[Technik]

Can i solved ink problems with this?

[lolomokalbo]

im searching for sx130 resetter and i turned out here, coz sx125 wworks also for sx130

[Moocows92]

I should definitely try it

EDIT I tried it and it doesn't work in my SX130 the black cartridge was still counted as empty I wonder if it just doesn't work in my own version as I seen other people have other kind of cartridges with a different chip than my own ...
Anyways thanks for the effort

[Lokelok]

Do this software works in windows 7?

[lolo88]

It doesn't work with my sx 125. Also it's write that's all is "OK".

[lararpeur]

Hello, please tell me how i can't dowload this file, i have alway sa message tha i have not a permission to download it??
Thank you.

[Canker_Canison]

I tried it and it doesn't work in my SX130 the black cartridge was still counted as empty

This software resets the waste ink pad counter, it doesn't fix faulty ink cartridges!!!!!

[staticgoat9]

SX125_TX121_Engineers_Software - Download - 4shared (http://www.4shared.com/get/kC-rpN_b/SX125_TX121_Engineers_Software.html)
heres the link again if its hard do download.. :)

[zombula]

Can i solved ink problems with this?



Why is the download coming up as corrupted file when i download it ?
I downloadd it last year & thought id ' upgrade ' but cant get it to work ..... any ideas to help me get the ink waste pad counter reset please ?

[Canker_Canison]

Why is the download coming up as corrupted file when i download it ?
I downloadd it last year & thought id ' upgrade ' but cant get it to work ..... any ideas to help me get the ink waste pad counter reset please ?

Update your compression software (winzip, winrar, etc)

[zombula]

Update your compression software (winzip, winrar, etc)


I have but when ive downloaded it & try to extract / read the files a message comes up saying '' Archive file ' Adjprog.exe ' CRC integrity test failed. The archive file is corrupted & cannot be opened ..... ''
So , how can i get the file open if my pc is saying it is corrupted ?
Any help is most appreciated ....... ive got a feeling the file is kernackered.

[Canker_Canison]

I have but when ive downloaded it & try to extract / read the files a message comes up saying '' Archive file ' Adjprog.exe ' CRC integrity test failed. The archive file is corrupted & cannot be opened ..... ''
So , how can i get the file open if my pc is saying it is corrupted ?
Any help is most appreciated ....... ive got a feeling the file is kernackered.

I've just downloaded the file, extracted & ran the program with no problems. So it has to be a problem with your software.

[kingkhalil]

I have problem executing it on Win 7 64

[Canker_Canison]

I've not checked this on 64bit, only Windows 7 32bit.

[bcorp]

Hi,
I have a epson SX130 with copy refillable cartridges. The printer won't recognize the cartridges anymore (it's been working good for a couple of months). While using your programme, I have a "communication error" although I desactivated my antivirus. Any sggestions ?

[Canker_Canison]

Hi,
I have a epson SX130 with copy refillable cartridges. The printer won't recognize the cartridges anymore (it's been working good for a couple of months). While using your programme, I have a "communication error" although I desactivated my antivirus. Any sggestions ?

How many times do I have to say this......

THIS SOFTWARE DOESN'T FIX CARTRIDGE PROBLEMS!

[merlingerin]

Hello,

Archive is corrupt.
Please attach it again.

Regards.

[merlingerin]

For all who need, working archive:

[peverell]

How reverse this program??? ... my printer name was epson stylus sx130, and now is tx121!! HELP, how can I go back to my deafult settings?! i searched all over the net and I can't find antyhing!!

[britto]

I've done all the steps, but the problem is always the same :( black cartridge not recognized, but till yesterday it worked and the cartridge had some ink remaining...
Some suggestions?
it doesn't work for me as well i use copy ink I konw when they are at the end epson don't recognize them anymore but still there's ink....

[fsckepson]

This does NOT work with UK SX130. I get a Communication Error when I get to the last step. :(

[kinius]

i got a problem with my sx 125, hope it's gonna help

[erebus]

Hi guys, I'm looking for Epson R2880 engineer software
can anyone help , Thanks

[johnkinuthia]

dear
does this software work on Epson stylus sx130
thank you:dong:

it should
work

[brimba09]

Hi,
I have a epson SX130 with copy refillable cartridges. The printer won't recognize the cartridges anymore (it's been working good for a couple of months). While using your programme, I have a "communication error" although I desactivated my antivirus. Any sggestions ?

Sometimes you just need to clean the contact points with a cotton bud and some alcohol.

[akspeedo]

Hi all, I tried this reset program and it works on most sw130 but one did not reset for me.
So I swaped the mother board from a faulty new one, sorted the PC thinks it is a new printer.

Hope this helps, cheers:pepsi:

[Marktwain010]

Tried downloading the WIC reset software but can't get the download link.

[pistib]

Hey guys,

It took me ages to source a SX125 waste counter reset program that works, so I thought I would pop it on here.

I've uploaded it into the download section, but thought I may as well pop it on here with a bit of guide too.

I've only tested it on XP 32bit, with a UK SX125 printer, so that's what the instructions will be tailored for. By all means try it on other OS's and feel free to post results.

Reset instructions for SX125:


Install printer if not already installed.
Download and extract attached file into a folder on your hard drive.
Run 'AdjProg.exe' and click 'Accept' on the splash screen then click on 'Select' at the top.
From the pull down boxes, select 'Epson Stylus TX121' for 'Model Name' and 'ESP' for 'Destination', click 'OK'.
Click 'Particular adjustment mode' then from the '---- Maintenance ----' section, select 'Waste ink pad counter' then click 'OK'.
Click 'Check' on the bottom right, this will query the printer and give information of ink shots and so on.
Tick the two boxes on the left, 'Main Pad Counter' and 'FL Box Counter', then click 'Initialize'.
It should come up with a message abut restarting your printer, do it!

Job done, carry on printing!

I recommend getting a waste ink tank for your printer, have a Google for one, the waste ink pipe is easily accessible from a clip in hatch on the back of the printer.

Hope that helps, if it's useful, don't forget to thank :)
J.

-------------------------------------------------------------------------------------------
right, rubbish is still being posted to gain access to this file even after a warning, i will say this one more time, DONT KEEP POSTING RUBBISH TO GAIN ACCESS TO THIS FILE, keep your posts to questions or an answer to another post, THE NEXT PERSON WHO POSTS.....THANKS OR GOOD POST OR JUST WHAT I NEEDED OR ANY OTHER RUBBISH TO GAIN ACCESS TO THIS FILE WILL BE BANNED, YOU HAVE BEEN WARNED !!! DK STAFF

YOUR FIRST POST GOES HERE-----> Introduce Yourself (http://www.digital-kaos.co.uk/forums/f2/)

-------------------------------------------------------------------------------------------


Hello, it is a very good program and I use them
I reset my sx130 waste ink counter, and I continues to play with this program
and I dump eeprom after I backup and restore :blue:
Of course, the contents of eeprom was change, and my printer broked.
windows xp see epson tx121 and of course, my printer fail.
Please, can anybody help me with a solution?

[pistib]

Hey guys,

It took me ages to source a SX125 waste counter reset program that works, so I thought I would pop it on here.

I've uploaded it into the download section, but thought I may as well pop it on here with a bit of guide too.

I've only tested it on XP 32bit, with a UK SX125 printer, so that's what the instructions will be tailored for. By all means try it on other OS's and feel free to post results.

Reset instructions for SX125:


Install printer if not already installed.
Download and extract attached file into a folder on your hard drive.
Run 'AdjProg.exe' and click 'Accept' on the splash screen then click on 'Select' at the top.
From the pull down boxes, select 'Epson Stylus TX121' for 'Model Name' and 'ESP' for 'Destination', click 'OK'.
Click 'Particular adjustment mode' then from the '---- Maintenance ----' section, select 'Waste ink pad counter' then click 'OK'.
Click 'Check' on the bottom right, this will query the printer and give information of ink shots and so on.
Tick the two boxes on the left, 'Main Pad Counter' and 'FL Box Counter', then click 'Initialize'.
It should come up with a message abut restarting your printer, do it!

Job done, carry on printing!

I recommend getting a waste ink tank for your printer, have a Google for one, the waste ink pipe is easily accessible from a clip in hatch on the back of the printer.

Hope that helps, if it's useful, don't forget to thank :)
J.

-------------------------------------------------------------------------------------------
right, rubbish is still being posted to gain access to this file even after a warning, i will say this one more time, DONT KEEP POSTING RUBBISH TO GAIN ACCESS TO THIS FILE, keep your posts to questions or an answer to another post, THE NEXT PERSON WHO POSTS.....THANKS OR GOOD POST OR JUST WHAT I NEEDED OR ANY OTHER RUBBISH TO GAIN ACCESS TO THIS FILE WILL BE BANNED, YOU HAVE BEEN WARNED !!! DK STAFF

YOUR FIRST POST GOES HERE-----> Introduce Yourself (http://www.digital-kaos.co.uk/forums/f2/)

-------------------------------------------------------------------------------------------


Hello, it is a very good program and I use them
I reset my sx130 waste ink counter, and I continues to play with this program
and I dump eeprom after I backup and restore :blue:
Of course, the contents of eeprom was change, and my printer broked.
windows xp see epson tx121 and of course, my printer fail.
detail in atached file.
Please, can anybody help me with a solution?

[jluisplagos]

Thanks!!! fantastic guys!

Love,
j

[AxisStarstreamer]

i'm gonna try it on Windows 8 with the sx125. hopefully it works

[AxisStarstreamer]

it didn't work for me (win8 64bit), but maybe this wasn't the problem

[wush3]

MY sx125 suddenly stopped recognizing its cartridges ( they were about half full before this started) I hope the reset tool can help me.., These chip restriction suck! My next printer will be something else... What would you recommend? canon, hp or something else ?

[Canker_Canison]

MY sx125 suddenly stopped recognizing its cartridges ( they were about half full before this started) I hope the reset tool can help me.., These chip restriction suck! My next printer will be something else... What would you recommend? canon, hp or something else ?

This program will not solve your problem. You need to buy new inks.

THE WASTE INK COUNTER RESET SOFTWARE ONLY RESETS THE WASTE INK COUNTER. NOTHING ELSE.

I really thought the name would of explained what it does.

[Hollie92]

I was just wondering if this would work for resetting the chip when manually re-filling ink cartridges?

[Jokan]

Man Johny! Your program is wonderful, its working and now my printer is back to life.
Live long man Johny.

in addition to that there is this pipe i found on the printer from the back which seems to be inserted on a hole attached to the carpet, and i decide to take it out directed it to an outside bottle so that the ink goes into the bottle. is it wise to do this?

Thanks a lot.

[behocines]

Hi

I'm looking for a resetter for my XP205.
All my searches on the net gave the same answer: just pay for a key.
There is no other way?

[monyli]

Holla :) HELP!!!!!!

i have a big problem with my sx125 i change eeprom data with epson adjustment prog the printer Has become tx 121

and i need help and solution to fix this problem

with flash or reset the printer

[Canker_Canison]

Holla :) HELP!!!!!!

i have a big problem with my sx125 i change eeprom data with epson adjustment prog the printer Has become tx 121

and i need help and solution to fix this problem

with flash or reset the printer


You will need to find a source for the correct firmware. As far as I'm aware nobody here has printer firmware.

[dinoon]

Please, i have epson sx105, i tried many resetters but nothing work

[werranntezone]

I didn't work for me (SX125). I'll try to buy new inks.