PDA

View Full Version : Actros MR CODE


Pzolee
25th May, 2012, 02:28 PM
Hi Friends!

I have a big problem. Key is ok. Its calculated from the dump, but its not working. Truck recognizes the transponder chip, but STAR shows key number is 0. Posting dump from 93c86.
DSAuto
25th May, 2012, 02:37 PM
Your file is damaged.
Post picture of the MR PCB and MR part number sticker.
Regards

Dimitri
Pzolee
25th May, 2012, 03:35 PM
The pictures:-)

2005 MB Actros 1846
DSAuto
25th May, 2012, 04:16 PM
Hello,

Please post the all the dumps - 93c86 both and 29F400 and I will try to fix the problem for you.
Please let me know if this is MP2 V8 actros. If different , please specify.

Dimitri
DSAuto
25th May, 2012, 04:18 PM
Hello again,

Please give me the PCB number in one of the corners as well.
I am off now. Will be back on Monday.

Have a nice weekend!

Dimitri
Pzolee
25th May, 2012, 04:20 PM
A few minutes and will post dump. Its not original :-( Yes its MP2 V8 Actros. Thanks for your help friend!
Pzolee
25th May, 2012, 04:31 PM
flash dump damage...
Pzolee
25th May, 2012, 04:36 PM
Temic 290459.A7B
2D-MATRIX

Truck : 2005 Actros 1846 Adblue
makura
29th May, 2012, 01:04 PM
Did you solve this problem?i have the same truck but mine the 29f400 is faulty and i need to replace it,will need a pair of 29f400 dump and 93c86.
Pzolee
30th May, 2012, 08:26 PM
Please upload Mercedes Truck 2005-2007 year 460HP Euro 5 no NOx sensor flash and eeprom.

Very thanks everyone.
DSAuto
1st June, 2012, 09:27 AM
A few minutes and will post dump. Its not original :-( Yes its MP2 V8 Actros. Thanks for your help friend!
Hi again,

You said the engine is V8, I think 541980 motor is V6.
Could you clear that please.

Dimitri
Pzolee
3rd June, 2012, 07:48 PM
Sorry-......

V6 engine....
DSAuto
4th June, 2012, 12:28 PM
Sorry-......

V6 engine....
I will see if I can find V6 set of Flash and eeproms for your board. It will change all the parameter and you have to change them back to your truck specs.

Dimitri
DSAuto
5th June, 2012, 03:00 PM
Could you send me the vin number of the truck.
Maybe then I can see which one of my files is going to work.
Are you sure you can not send me the flash chip data?

Dimitri
Pzolee
7th June, 2012, 05:14 AM
Thanks for all the user's help......truck start...
bynow3
7th June, 2012, 06:25 AM
All three correct dumps were used to solve problem? Both eeproms and flash?
Pzolee
7th June, 2012, 07:59 AM
Yes...two eeprom and one flash...