HELP TO CHANGE SERIAL AUTOCOM PLEASE

[morito]

HI

I need help to change serial n? in my autocom clon, in the 2011/3 version there are errors all time

many thanks in the advance for big help

THANKS

[flavyus1987]

What errors you have?
"No loading cars list, and shuting down" or "No VCI found" ??
For both errors use search on forum to found the solution.

[morito]

no vci found

[morito]

nothing can help`??


thanks

[przemyslav]

Desolder Tiny45 and program it in external programmer.
I've programmed mine autocom with wellon and it works fine. You just need to unsecure eeprom first and secure after programming.

[morito]

hi you have dump good to autocom?

thanks

[przemyslav]

sure.
Here is with serial 39071 but there is no problem to change it in any hex editor.
Pass on PM.

[Artilect]

If you need just change the SN you can use this Tool. It is soft for changing VCI SN via USB. No need to desolder, flash,...

And dont forget to thank ;)

BR

[Artilect]

If you need activation for Autocom 2011.3 I can also help you, just post jour XML files.

[Meat-Head]

If you need just change the SN you can use this Tool. It is soft for changing VCI SN via USB. No need to desolder, flash,...

And dont forget to thank ;)

BR

wicked, is their a limit to the number of times it can be used?
can it be used for anything else?

OFF TOPIC:-

can it be used to *TRY* and change serial number of ELM327 to see if works with a nicked copy of Reanult True Code?

[Artilect]

As I know there should be no limit in number of flashes. It is just soft for changing the VCI SN. I have use it alot of times to change the Autocom VCI, I asume that is also usable at Delphi VCI, it is same hardvare, but I didnt have chanse to try.

BR

[Artilect]

If you need just change the SN you can use this Tool. It is soft for changing VCI SN via USB. No need to desolder, flash,...

And dont forget to thank ;)

BR


Now I understand why people are putting some stuff on forum and make the password protected arhive.



I have never understood this, now you can see there is 39 Downloads and only 7 people have pushed the Thanks button.

BR :flybye:

[Meat-Head]

I have never understood this, now you can see there is 39 Downloads and only 7 people have pushed the Thanks button.

BR :flybye:

I'm the other way, don't thank if password.

Ask member Darwins what he thinks to passwords - the mercedes he had to let go - NOBODY would help him with password.

[aberroesjr]

Artilect, thanks for sharing! I'm a newbie in this forum and really appreciate your support

[willobd]

no vci found

The solution is (delete the software then install and active again):

1- Uninstall the software
2- Delete the license (search folder name autocom in windows. and delete all folders)
3- Setup software. And make activation


The steps for not detect VCI:

1. Disconnect from internet
2. Delete folder with all files in it: "c:\Documents and Settings\USER\Application Data\Autocom
3. Delete folder with all files in it: "c:\Documents and Settings\All Users\Application Data\Autocom
4. Start Main.exe, reactivate software and you're done!
5. Most important, stay off line from the internet.

[nikinik]

If you need just change the SN you can use this Tool. It is soft for changing VCI SN via USB. No need to desolder, flash,...

And dont forget to thank ;)

BR

MILLION THANKS!!! JUST FOR COLLEGES THAT DONT KNOW ,WHEN
WANT TO CHANGE SERIAL DEVICE MUST BE NOT ONLY IN USB ,BUT OBD PLUG ALSO PLUGED IN WITH IGNITION ON.

[Artilect]

Yes the VCI have to be connected to OBD, to get power supply.

BR

[ioanrokos]

Hi all of you! Any SW for changing serial in new CDP+ of Autocom VCI?

[reyx]

I am looking for the same thing. Is it still possible to change to the gold autocom?
Thk. I am google-ing around but very few hits.

BR

reyx

[tehnosoftex]

No way to change serial in vci+ without changing the mcu.

[mdanilo]

QUOTE=tehnosoftex;2673552]No way to change serial in vci+ without changing the mcu.[/QUOTE]
It's not true,Mr.Fantomel from other forum has solution,thanks him.349359 349360

[RobSSS]

Can i change my gold autocom vci (30250) to serial 100251 si it will work with the new 2016 program?

[zoki21]

no need to change, just install autocom 2016, at the beginning of installation just select 30250, and it will work for you, i also use gold autocom with 2016 software

[Mario6]

I have something like that. Probably to change SN. Unfortunately I didn't try.

[electronistul21]

I try this ,and work good and very fast ,without soldering nothing.

[jozzaholmes]

Thanks you been searching ages!

[mejinn]

hello, were you able to change serial? I have to change serial from 5 to 6 numbers

[crouchinggerbil]

hello, were you able to change serial? I have to change serial from 5 to 6 numbers

You need to buy a better vci.

You can not change from 5 digit to 6 digit serial.

You can keep searching if you like but it is not going to happen.

Surely you can at least afford to buy a good tool when you get the software for nothing.

Your 2nd post in the whole 5 years that you are a member here............ wow.

[boby1979]

try to change the SN.txt file in autocom files