X-TOOL

[ovi_dk]

Hi Folks
I open this thread for all users of x-tool
X-TOOL - home (http://www.x-tool.eu/),
or for new oner of x-tool!
One of mi friend get this tool and make a try on golf 6 with nec inside,wath can i say,very quiqly make the jobb and very ok,diference between super pog and x-tool its x-tool worck:)
The soft move better,the hw the same

If sombode have it and can say wath do or not will be apreciate to know if worth or not the money
Thank u
Best regards

[diagnoza_auto2000]

sofware look like Carprog,same shit my friend

[t77]

Hi friends this is a same company like superprog only change name and software. I personaly do not buy this shit.BR

[securipro38]

Yes seems to be exactly the same bad tool like superprog ,just to see the contact mail adress...

[iProg-carradio]

Hi friends this is a same company like superprog only change name and software. I personaly do not buy this shit.BR

it is not alone and also

tested na Citroen Jampy HC08 DIAG, NEMO OBDII, MB Vito HC08 OBDII or DIAG, Renault Kangoo HC08 DIAG, Kangoo III 93C76 OBDII, VW DSG OBDII, VW CADDY VDO 2006...OBDII, ECU VAG EDC16 CAN OBDII, TACHO1319, TACHO1324 --- OK.:bounce::bounce::bounce:

[lake77]

I have x-tool.. today i make 2x kienzle, passat after 2006 + dsg + ecu and all ok

[lake77]

ford focus 2005 - all ok

[badenaleks]

One bad that the prices they change often!

[carradio2001]

However ... TO EXPENSIVE.. Carprog tool, X-tool or super tool, big tool no matter the name, hey folks ...get a real prices, something like <1000 euros not over !!!

Carradio2001.

[dyc]

I heard from polish friends that is better than superprog work almost all that is described but after superprog f.ck up I personaly dont want to risk buying this right now

[iProg-carradio]

Totay tested new version Ford Connect 2010yar - read + write km - OK :elefant::elefant::elefant:

[lake77]

Ford mondeo 2008 - color dash with 24c16 (problematic dash for codecard, digiprog and other ...old km are back after recalibration) with X-tool success about 6 second..

very good :captain:

[z786]

i bought a hammer and it knocks nails in faultlessly

[drpeter]

Ford mondeo 2008 - color dash with 24c16 (problematic dash for codecard, digiprog and other ...old km are back after recalibration) with X-tool success about 6 second..

very good :captain:
The chinese didn't want to clone superprog for some reasons. Maybe x-tool? Let's wait for a while.

[ovi_dk]

Hehehehe,i think will be easy to clone then carprog:))))carprog worck online x -tool no:))))so who knows,maybe u have perfect right Dr:)

[omglol]

i bought a hammer and it knocks nails in faultlessly

lol lol lol

[digimile]

hi
x-tool clone will be 50 $ when it will be cloned....wait for next china clone..
thanks

[lake77]

next two color tacho - ford mondeo 2008...without problem

[lake77]

next color ford mondeo with success:bounce:

[lake77]

now i make renault jaeger dash via dash conector...all ok :heeeelllllooooo:

[nebojsapejcic]

Have you tried BSI with obd2 option?

[lake77]

where is BSI option?

[lake77]

BMW 3r 2004 - EWS3 on the table with x-tool without problem :captain:

[brkic6]

Story goes at same direction as Superprog1 :D
Wasted money...
SUPERPROG secend edytion ? NOW ONLY 1 290,00 EUR
X-TOOL - home (http://www.x-tool.eu/)
I'll buy Carprog clone soon...

[lake77]

ford focus 2007 without problem...

[djoko.k]

Did anyone test this on Volvo?

[omglol]

Story goes at same direction as Superprog1 :D
Wasted money...
SUPERPROG secend edytion ? NOW ONLY 1 290,00 EUR
X-TOOL - home (http://www.x-tool.eu/)
I'll buy Carprog clone soon...

Where's the catch?

[pnbrito]

I have X-TOOL,and work perfect
i tested today in many car,work 100%
MEGANE-24C04-
MEGANE-93C56
CLIO-24C04
FORD ...2008
FORD S MAX MAC/24C16
IS VERY TOOLS

PAULO

[brkic6]

Where's the catch?

Here is catch...I have Superprog1 , they promised lots of updates,and after we bought several pieces,they decided to stop updates for Superprog1 , and developed Superprog2... Now superprog2 prices goes down,same like SP1,until enough new customers buy SP2...then will be SP3 , etc....
Catch is that tech support and promised functionality is equal to zero...

[omglol]

I understand, but for 290EUR, I wouldn't bother if they stop making updates tomorrow ... if everything on the list actually works ... if it doesn't, it is not worth spending 10EUR ...

[ovi_dk]

I understand, but for 290EUR, I wouldn't bother if they stop making updates tomorrow ... if everything on the list actually works ... if it doesn't, it is not worth spending 10EUR ...

:roflmao::laugh:)))))))))))))))))):roflmao:

[automan]

you missed the price for 1000 euro.
i also purchased superprog 1 with my coulegue brkic6 and like in other tools there are bugs but most things from list work.we even helped those idiots in developing tool as in start we were testing it and sendind them dumps from cars which dont work.
in the end they ****ed us up.after a year they developed new tool and ask from us load of money to transfer to new.we are also cheated for lots of promissed functions.
we payed for working bsi,35080 eraser,airbag etc.
not to mention idiot p74 which stolen my dashtool.

[brkic6]

I understand, but for 290EUR, I wouldn't bother if they stop making updates tomorrow ... if everything on the list actually works ... if it doesn't, it is not worth spending 10EUR ...

Yes, for 290EUR you are right...But they will not give it for 290,maybe if you add 1000 more...but question is-what you got for 1290? I would pay maybe 200 eur for transfer from Superprog1 to Superprog2...but 1290...so bad expiriences with them to do something like that...

[tinerfe30]

Yes, for 290EUR you are right...But they will not give it for 290,maybe if you add 1000 more...but question is-what you got for 1290? I would pay maybe 200 eur for transfer from Superprog1 to Superprog2...but 1290...so bad expiriences with them to do something like that...

The question is, is this team you trust?
http://www.digital-kaos.co.uk/forums/f174/superprog-buying-222351/
I'm waiting for the results or make an offer of ? 1000 less. :laugh:

[lake77]

RNS510 decode without problem...:captain:

[brkic6]

The question is, is this team you trust?
http://www.digital-kaos.co.uk/forums/f174/superprog-buying-222351/
I'm waiting for the results or make an offer of ? 1000 less. :laugh:

...or we should wait until some Mr. Wang or Chang clone it for couple of bucks, like Carprog... :)

[jogi]

Please, stay away from this company. The people behind this X-TOOL project are well know in Poland. There're hundreds of people cheated by them. If you buy something from them there's only one thing you can be sure ... You will be fu....ed.

Jogi

[lake77]

Focus 2003 with HC11...recalibration via dash conector - without testpoint (like diga, and other). only 5 wire connect...without problem :captain:

[captain crackers]

lake77, "Focus 2003 with HC11...recalibration via dash conector - without testpoint". This is a major advancement in dash programming! Is there anyone else using one of these tools? Arthur.

[Zaebasto]

Audi Q7 2007- work ok, on next week test on Q7 2009

[carteknik]

What soft version are you working on?
Mine is showing 2.1 and no Motorola mcus available.

Got other programers no worry, just to know. They are still on vacation.

thanks

[Zaebasto]

Renault Megane II 24C04 and 93C56- work ok

[lake77]

Dash can emulator on megane dash working...

[lake77]

next kienzle 1394 success + mondeo 2008 + focus 2006 success

[cveti72]

Everything works perfectly so far tested

[z786]

can this tool do:
golf mk4 via obd?
astra mk4 via obd?
skoda fabia mk1 obd?
im dying to know
i hope it does so i can put it on my list for santa this xmas

[Anatomik]

what price of it device?

[djoko.k]

1200 euros

[Anatomik]

where i can buy it?

[djoko.k]

Look at first post...

[tinerfe30]

what price of it device?

Hi mate.
The price in offert is 1200?. But nos is 1990?. X-TOOL - X-TOOL English version (http://www.x-tool.eu/page9.php)
Best regards

[Anatomik]

what it does mean?

[tinerfe30]

what it does mean?

The x-tool was on offer for 1200 ?. But now and according to their website is to 1990 ?.

[drpeter]

The x-tool was on offer for 1200 ?. But now and according to their website is to 1990 ?.

Yes and at the end of the month when they are out of money the price is 900 euro.

[lake77]

in last update 3.0 are enabled ABS units in renault via obd...i will try it

[nebojsapejcic]

in last update 3.0 are enabled ABS units in renault via obd...i will try it

If you manage to do that , please upload a video on youtube , I'm sure many of us would love to see that miracle!

[lake77]

why miracle? diagprog make this too

[mastaflex]

why miracle? diagprog make this too

sincerely i prefer to do ABS manually, no risk and always have backup. flashing dash for me is not reliable, if it goes wrong no solution except getting a new one

[maruti]

in china available this tool or not ?

[carradio2001]

in china available this tool or not ?
Not yet...

Carradio2001.

[z786]

why miracle? diagprog make this too

how can u compare it with dp3? u buzzing?

[claudio35]

X-TOOL - Schematic Adapters Price List (http://www.x-tool.eu/page8.php)

with out adapters eraser dashtool

1500euro

[barry94]

the gay is not serious for shipment i must open dispute with paypal to send product i have not yet receive the product but after your post i think i refuse the parcel...because the quality and description of website i am sure doesn't work...for PSA OBDII BSI ALL MODEL ??? Before 2005 ??? without use protocol CAN-H and CAN-L it is hard because nobody has managed to do this...

[radsky]

the gay is not serious for shipment i must open dispute with paypal to send product i have not yet receive the product but after your post i think i refuse the parcel...because the quality and description of website i am sure doesn't work...for PSA OBDII BSI ALL MODEL ??? Before 2005 ??? without use protocol CAN-H and CAN-L it is hard because nobody has managed to do this...

they are very well known liars and cheaters in Poland. Ask somebody from Poland about Dorian, superprog .... etc. could write a thick book

[barry94]

Never another person can give opignion of this factory...???

[mgrka]

thieves and crooks.do not buy it,nor has any company no address without registering.

[automan]

if anyone from poland have email adress from tax police or other similar service can send me private and i will turn them in.i have all money transfer data from bank etc.

[angelcom]

for me don't work at all, sent back to seller :guns:

[radsky]

for me don't work at all, sent back to seller :guns:

did you receive a refund ?

[kamen stefanov]

hi,ford s-max 2011 working?

[bouekkazine]

hello
is there anyone has tested the abs megane 3; sc?nic 3; fluence by obd?
worked or not worked ?
thanks

[eprst]

megan3-yes

[odzim80]

What about volvo????????????

[javilette]

have it more airbag that carprog ????????

[teerak2uk]

have it more airbag that carprog ????????


if its airbag repair then go for ultraprog good genuine product,good price,good support.

[kennedy-afn]

I have X-TOOL,and work perfect
i tested today in many car,work 100%
MEGANE-24C04-
MEGANE-93C56
CLIO-24C04
FORD ...2008
FORD S MAX MAC/24C16
IS VERY TOOLS

PAULO
PNBrito, voc? ? Brasileiro ?

Are you a Brasilian ?

Thanks, Kennedy.

[kamen stefanov]

Hi! !How does a 35 080, a test?

[teerak2uk]

Hi! !How does a 35 080, a test?

????????????????????????????

[jovial]

hello!the x-tool is a good tool taking into account the price / quality, it is unfortunate that the owner is so nasty
BR

[nerds]

comprei uma tambem ate agora sem problemas,so nao fez ecu fiat 4cf ,also bought one so far no problems, so did not ecu fiat 4cf

[tutkum]

hi all,
X-tool came four days ago. I've tested these cars.
megane 2, OK OBDII
clio 3, OK OBDII
audi a4 2008, OK OBDII
fluence display emulator, OK DiAG
35080v deleting, reading, writing, OK
080dQ deleting, reading, writing, OK
Fiorino, OK OBDII
clio NEC, OK DiAG

[drpeter]

please stop this propoganda

[PremierD]

Stopped ..... :)