Carprog reprogramming - final solution

[lupu_sandu]

I see many threads opened for carprog reprogramming, so i decide to open another one :)
In attach is solution how to, pictures, instructions, software, all info.
I manage to reprogram with success using a old Wiggler J-tag on LTP. Screen shot attached.
Enjoy your carprog.

[H.Wessel]

Do you think that this programmer it?s ok? it?s the cheapest I found

ARM Parallel Wiggler JTAG Programmer Debugger Emulator+Free Shipping | eBay (http://www.ebay.com/itm/ARM-Parallel-Wiggler-JTAG-Programmer-Debugger-Emulator-Free-Shipping-/150845423456?pt=LH_DefaultDomain_0&hash=item231f167f60)

[lupu_sandu]

Yup. It's ok for this job ;)

[Meat-Head]

cool so the question is can the counter drop to zero before doing this?

[lupu_sandu]

No, i say before: must be reprogrammed before counter go to 0.

[vomit]

thanks, very much.

[ahadi]

I see many threads opened for carprog reprogramming, so i decide to open another one :)
In attach is solution how to, pictures, instructions, software, all info.
I manage to reprogram with success using a old Wiggler J-tag on LTP. Screen shot attached.
Enjoy your carprog.


what about the counter ..

[doslamer]

I see many threads opened for carprog reprogramming, so i decide to open another one :)
In attach is solution how to, pictures, instructions, software, all info.
I manage to reprogram with success using a old Wiggler J-tag on LTP. Screen shot attached.
Enjoy your carprog.

I can confirm solution working !!!!! Before 15 minutes i repair my carprog.
I made my Wiggler J-tag Lpt from old part's and universal pcb , about 1 hour building process and checking the connection.

[Meat-Head]

ON TOPIC:-

For thick people which EXCAT selection of the jtag programme is used?

Seemed to have gained umpteen shortcuts on my deskytop now!

[ahadi]

I can confirm solution working !!!!! Before 15 minutes i repair my carprog.
I made my Wiggler J-tag Lpt from old part's and universal pcb , about 1 hour building process and checking the connection.

the counter still available or removed(no counter).

thanks

[ALEXEI]

ON TOPIC:-

For thick people which EXCAT selection of the jtag programme is used?

Seemed to have gained umpteen shortcuts on my deskytop now!

for you this is the starter

[ALEXEI]

the counter still available or removed(no counter).

thanks

after reflashing counter will never start again.
please everybody read this for no further questions

[digitaltech]

I see many threads opened for carprog reprogramming, so i decide to open another one :)
In attach is solution how to, pictures, instructions, software, all info.
I manage to reprogram with success using a old Wiggler J-tag on LTP. Screen shot attached.
Enjoy your carprog.
Taking bread away from chinamen cloners... you are ruthless...


Keep up the good work.
Best regards,
DT

[justy22]

will i be able to programme my carprog with my old jtag ha outputs TMS,TCK,TDI,TDO,TRST,VCC,GND

i used it for j tagging dead cable boxes

[ALEXEI]

will i be able to programme my carprog with my old jtag ha outputs TMS,TCK,TDI,TDO,TRST,VCC,GND

i used it for j tagging dead cable boxes

you can use it if its buffered interface.
as I know the boxes can be programmed directly on lpt port with 4 resistors.
this was my cable for flashing sat receivers

[justy22]

you can use it if its buffered interface.
as I know the boxes can be programmed directly on lpt port with 4 resistors.
this was my cable for flashing sat receivers


i have enclosed a pic of it, i bought it from TMC, i not sure if its buffered, what do you think

[ALEXEI]

i have enclosed a pic of it, i bought it from TMC, i not sure if its buffered, what do you think

Its OK mate !
This is Wiggler interface.
Use H Jtag and set it for Lpt Wiggler interface.

[justy22]

Its OK mate !
This is Wiggler interface.
Use H Jtag and set it for Lpt Wiggler interface.


What do i connect to NRST on carprog do i use my TRST output

my TERMINALS are TMS,TCK,TDI,TDO,TRST,VCC,GRND

[ALEXEI]

What do i connect to NRST on carprog do i use my TRST output

my TERMINALS are TMS,TCK,TDI,TDO,TRST,VCC,GRND

look around the forum. it was posted the schematic of interface and NRST signal

[dimet]

It is cheaper to buy ARM Parallel Wiggler JTAG Programmer Debugger Emulator - US$6.36 - Free Shipping - GlyBy.COM (http://www.glyby.com/arm-parallel-wiggler-jtag-programmer-debugger-emulator_p11165.html)

[Meat-Head]

justy mate, what the number on your wiggler chip please.

did see a minjump lead in the photo?

[sattvv]

I do all this without success
I program the AT91 but once you plug in the laptop The device does not work!!/usb device not found/
Can anyone tell me what a mistake I do??
I guess you do not do proper programming configuration
Thank you in advance!!
( no addys :rulez: )
best regards

[radsky]

I do all this without success
I program the AT91 but once you plug in the laptop The device does not work!!/usb device not found/
Can anyone tell me what a mistake I do??
I guess you do not do proper programming configuration
Thank you in advance!!
best regards

Did you desolder the crypto eeprom before jtag programming?

[cardoctor]

@lupu_sandu

Thanks Lupu marchel...........:D

[sattvv]

Hi
Yes desolder AT88
do everything as explained and do not receive!!
the problem is not in AT88
After exchange with working carprog everything is fine
error when programming AT91 and therefore ask for help
Thank you!!

[elchip]

I do all this without success
I program the AT91 but once you plug in the laptop The device does not work!!/usb device not found/
Can anyone tell me what a mistake I do??
I guess you do not do proper programming configuration
Thank you in advance!!

best regards

What was number of your counter ?
Did you have " device is locked " ?
Any info will be welcome if you want help.

[busaman]

i have a question i have original carprog with only a few options open will this unlock all ??

[elchip]

i have a question i have original carprog with only a few options open will this unlock all ??
Yes that DUMP will open full your device but will never be up-datable and genuine.So if you want that risk ...
I not recommand play with ORI tool.It is your choice.

[sattvv]

Hello
device not locked
counter is about 20-25
programming is successful but became involved after the device laptop does not see it
regards

[justy22]

justy mate, what the number on your wiggler chip please.

did see a minjump lead in the photo?

Number on my wiggler chip is ST M74HC244B1
990AN VW
MYS 99 636

[Meat-Head]

i have a question i have original carprog with only a few options open will this unlock all ??


Yes that DUMP will open full your device but will never be up-datable and genuine.So if you want that risk ...
I not recommand play with ORI tool.It is your choice.


COOL.

Busaman - keep this to yourself - what is your serial number?

Lupu mate, what is the serial number after flashing this dump?

Can you cut and butt, see if you can add your serial number to dump? :roflmao:

[lupu_sandu]

SN of carprog after update:
081105CAR001773I

[PremierD]

And before update .. as well

[radsky]

SN of carprog after update:
081105CAR001773I

I think that SN is stored in crypto eeprom AT88. It is "easy" to read this chip,
but.... we must to know the password/pin to read it with success.
No brute force method - chip will be blocked after 4 attempts with bad pin.

But.... we have .bin for arm - arm communicate with crypto eeprom without problem
so maybe somebody with knowledge of arms can dissassemble the binary that we have and
extract the pin from it ?

[elchip]

I think that SN is stored in crypto eeprom AT88. It is "easy" to read this chip,
but.... we must to know the password/pin to read it with success.
No brute force method - chip will be blocked after 4 attempts with bad pin.

But.... we have .bin for arm - arm communicate with crypto eeprom without problem
so maybe somebody with knowledge of arms can dissassemble the binary that we have and
extract the pin from it ?

It is 6 digit code , I do not have but it is like : 22EF67

SeeProg do it from ELNEC no problem.

[carradio2001]

It is a GOOD IDea for change the SN. WHY ? Because can update via internet free of charge with last version and all options, the primary condition is to obtain a full SN Carprog programmer (paid and updated) !

Carradio2001.

[radsky]

It is 6 digit code , I do not have but it is like : 22EF67

at88sc is very popular in toner and ink cartridges for printers.
There are plenty of ppl that can read this chip - "we can read any at88sc chip".

Below some resources i have found on the web:

AT88SC hot searching download - www.pudn.com (http://s.pudn.com/search_hot_en.asp?k=AT88SC#)

reseting at88sc0204 - YouTube

and software with interface schematic:

[radsky]

Or.... maybe we don`t need to read the crypto eeprom. Maybe the easiest way to change SN is something like loader for main software that will be changing SN on the fly ?

elchip - what do you think about it?

[elchip]

Or.... maybe we can`t need to read the crypto eeprom. Maybe the easiest way to change SN is something like loader for main software that will be changing SN on the fly ?

elchip - what do you think about it?

I am not good on PC SW ..
I am hardware man ..

Here is a couple expert's for PC SW so we need wait if someone answare ..

Regard's

[Meat-Head]

at88sc are very popular in toner and ink cartridges for printers.

:

OFF TOPIC:- BUT RELEVENT

What about remving one of these chips out of a ink thing, stick straight into carprog - see if it screams - or see if serial number changes to xxxxxxx etc?

Susspose if desprate stick your car prog chip in your printer, try to read. :roflmao:

[radsky]

Susspose if desprate stick your car prog chip in your printer, try to read. :roflmao:

... and the printer will print secret code and whole dump of at88 lol

[Meat-Head]

... and the printer will print secret code and whole dump of at88 lol

if not stick chip back on ,say nothing post back
susspose say an Epson secret code wil be say rt th ff 33 whatevr, it will try that code! :roflmao:

[verica]

i have question exept pull out eprom before programing witch is point with blue color other ic and 2 resistors with red colur whot shou be done with them should remove also before programming or.....

[verica]

and forgot can i use this interface to program carprog thanks

[autocargo]

i have question exept pull out eprom before programing witch is point with blue color other ic and 2 resistors with red colur whot shou be done with them should remove also before programming or.....

Just ignore the other marked things on the photo... only eeprom has to be removed.
You can build that wiggler or this one...

[Multipla]

Meanwhile, I tell you that the 74hc are good up to a certain point but then doing many jobs on cars are subject to deterioration, the inrush current vhe crossing the 74hc sometimes (+ \- 3.3_5 volt) arrives or 4 or 6 so by \ 5.8 tests I found a great product and very good in 74AHC125N and also the characteristics of the ddo old 74hc.:roflmao: beer for all :)

[Multipla]

We see good: when the pin reaches a signal to 1Y 5V, I will return on the same signal pin 1A but with same voltage Vcc, in this case 3, 3V ...

[Meat-Head]

Justy mate, did you manage to do yours yet?

mine came out for fresh air, then back to bed

[Multipla]

ok, goto bed

[Multipla]

:sheep:are you on vacation or then go to work?

[ahadi]

every thing is clear about carprog but its schematics still missing .

Regards

[elchip]

every thing is clear about carprog but its schematics still missing .

Regards

Maybe you can draw and post ;-)

[Meat-Head]

ok, goto bed
:sheep:are you on vacation or then go to work?


HUH - pointless post - that's my job.

My CarProg Clone came out of it's box, got a breath of fresh air and stuffed back - the Airbag ecu - it had all numbers EACH side of it , but not that one - (Merc S320 2001)


Multipla (http://www.digital-kaos.co.uk/forums/members/81371-multipla/)
Junior Member

Join Date: Oct 2009
Location: Turin,Italia
Posts: 33
Thanks: 26
Thanked 6 Times in 5 Posts
Downloads: 2
Uploads: 0

[raimi.s]

after reflashing counter will never start again.
please everybody read this for no further questions


but unfortunately counter returned !!!

[autocargo]

but unfortunately counter returned !!!

Have you been use it many times? I have flashed it mine too... so far no counter. Wonder if anyone else got it...

[carradio2001]

After received Carprog and use it about 50 times, counter appear, after re-flash used over 100 times ...no counter !
Bad file or bad procedure you have !

Carradio2001.

[radsky]

After received Carprog and use it about 50 times, counter appear, after re-flash used over 100 times ...no counter !
Bad file or bad procedure you have !

Carradio2001.

the same with my clone. I used it more than 150 times - no counter.

[judor]

china clone have limit 400 times ( Info from russian forum)

[Meat-Head]

china clone have limit 400 times ( Info from russian forum)

Before or after Lupu solution.

If you reflash Lupu solution after 300 uses is it back to 400?

[judor]

Before , original china dump lol

[elchip]

Before or after Lupu solution.

If you reflash Lupu solution after 300 uses is it back to 400?

Lupu never haved HIS SOLUTION ...
NEVER

[Meat-Head]

Lupu never haved HIS SOLUTION ...
NEVER

*CONFUSED*

I have NO problems with Lupu - he is too far away, but would be more than happy to hover over his shoulder and LEECH information off him:roflmao:

Now i'm not expecting a reply from Lupu as i'm currantly 'not' a DF forum supporter due to STILL got problems with Meaty Card thinking that www.meat-head-motors.co.uk (http://www.meat-head-motors.co.uk) are FICTIOUS!

They still REFUSE to issuse a card in the company name. :roflmao:

This the ONLY reason why have not paid again. If i can send cash call it done.

[olegario]

Just reprogged my CP, 5 minutes job, but lost hours in tries to connect CP to Wiggler. So if your Wiggler based on 74hc244 and you have problems with connection, just solder wire from CP's 3,3v pin(Erase pin on the pic) to Wiggler's 74hc244 pin Vcc (20).

[ahadi]

yes , after flash carprog last week today the counter come up , sorry Mr. the no counter solution not careful .

regards

[Meat-Head]

ahadi can you reflash and report back please on counter?

can you upload the 'used' dumhp thanks

[ahadi]

its good i keep wiggler interface for further re flashing and pin 55 still raised up with glued wire to the ground . the duMp is from here .lol
(http://www.digital-kaos.co.uk/forums/attachments/f171/136239d1344437144-carprog-reprogramming-final-solution-project-carprog-rev-0.3.rar)

[Meat-Head]

flashing and pin 55 still raised up with glued wire to the ground . lol
(http://www.digital-kaos.co.uk/forums/attachments/f171/136239d1344437144-carprog-reprogramming-final-solution-project-carprog-rev-0.3.rar)


did you use hot air or soldering iron to lift pin.

was understanding you could just tack a wire to said pin?

[olegario]

It's not a problem anymore if you have Wiggler, you can flash it each weekend. Lift pin 55 with thin needle, solder to it flexible cable and fix it with glue (as described in first topic) another point solder to GND or Erase point (depends what you need ) I think Chinese sellers must add Wiggler to CP cable set :)

[dexik]

Hi m8's

I do not know whether atmel sam-ice is a good programmer to do the job?

Help;)

[justy22]

Justy mate, did you manage to do yours yet?

mine came out for fresh air, then back to bed

No still not got round to this but will soon, have you had much use of it at work

[Meat-Head]

No still not got round to this but will soon, have you had much use of it at work

WRONG THREAD:-

Read a Vauxhall Astra 1.6 16 Valve pin code <PLEASED AS PUNCH SMILEY>

ON TOPIC:-

Guess you might take it to Tam for IN-correction, can you take note and photos please.

Suggest a line of Sno Pake on the AT822SC whatever thing to help identigfy ornatanion.

Should have a chamfered edge.

[gauch]

I have USBJTAG, do you think I can use it to program carprog or only wiggler works?

[ALEXEI]

I have USBJTAG, do you think I can use it to program carprog or only wiggler works?

work any tool which support this chip
I use Kiel. I think its the best
USB ARM JTAG programmer/debugger "Ulink mini" for KEIL (http://www.bravekit.com/usb_keil_ulink_arm_arm7_arm9_cortex_jtag_programme r_debugger)

[gauch]

what about this one:
Ulink 2 USB JTAG Emulator ARM9 Cortex Keil Ulink II GH2 | eBay (http://www.ebay.com/itm/Ulink-2-USB-JTAG-Emulator-ARM9-Cortex-Keil-Ulink-II-GH2-/120980197645?pt=LH_DefaultDomain_0&hash=item1c2afb510d)

[buga37]

what about this one:
Ulink 2 USB JTAG Emulator ARM9 Cortex Keil Ulink II GH2 | eBay (http://www.ebay.com/itm/Ulink-2-USB-JTAG-Emulator-ARM9-Cortex-Keil-Ulink-II-GH2-/120980197645?pt=LH_DefaultDomain_0&hash=item1c2afb510d)
yeap, i was looking to buy this one too

[gauch]

I bought one today. I'll see what is worth when arrives :)


Sent from my iPad using Tapatalk HD

[ahadi]

maybe you are lucky enough to get it with never lock (http://www.nandtools.com/carprog-full-v401-never-lock-p-362.html?zenid=35b4e1cf85c4ab29f22c488d06567bc6) duMp

[georgegt]

If the new serial is 081105CAR001773I
Where tu find a new god lib file working with new version ?

[djfelixrs]

I wonder if doing this procedure releases 100% of all functions carprog and what software has already been tested? I'm using the version of the V505 carprog posted right here on DK, all works released?

I wonder if the functions are unlocked bikes?

[cosmind]

I tryed v5.05 with bmw 35080 and dont work

[Pakli30]

This is me:
it is good for him?
We can pin assignments?
http://toolparts.co.kr/web/img/dev_board/arm/arm9/s3c2440_7/2.jpg

[spychu14]

For what software is this dump safe ??

Is new versions unlock some new functions or everything is n/a ??

Anyone have dump for AT88 ??

[912secured]

Just find where the number to the counter is comp 2 used dumps. Jmp off code at start up (to empty space at the end )set always to factory original jmp and every start up it resets.

[andor777]

Hello

Someone is AT88sc dump (carprog)

I wanted to read:afraid::stupid:
But I read the previous ones
Carpog dont work ,dead
Please help

[damachado]

My device is locked... Will this unlock the device to its original state?
And will this debugger do the job?

https://www.olimex.com/Products/ARM/JTAG/ARM-USB-TINY-H/


Many thanks

[elchip]

Hello

Someone is AT88sc dump (carprog)

I wanted to read:afraid::stupid:
But I read the previous ones
Carpog dont work ,dead
Please help


My device is locked... Will this unlock the device to its original state?
And will this debugger do the job?

https://www.olimex.com/Products/ARM/JTAG/ARM-USB-TINY-H/


Many thanks

As I know you will hard do that ...

[gsmik]

It may be useful for someone:ciao:

[rm23]

thanks gsmik but did you test it ? has someone password to AT88sc crypto eeprom ?

[gsmik]

I have not testet this solution

[elchip]

I have not testet this solution
But dream is free ;-)

[damachado]

As I know you will hard do that ...


What do you mean?

Cant be unlocked? Or i wouldnt be able to unlock it by doing this?

Hey elchip i can see that you have lots of knolege on this can i count on your help? I got into this kind off things because i do like it and im trying to learn more not to make money this is not my work area this is more like a hobby and a "help a friend" kind of thing to me.

Hope you understand.

Best Regards

[elchip]

What do you mean?

Cant be unlocked? Or i wouldnt be able to unlock it by doing this?

Hey elchip i can see that you have lots of knolege on this can i count on your help? I got into this kind off things because i do like it and im trying to learn more not to make money this is not my work area this is more like a hobby and a "help a friend" kind of thing to me.

Hope you understand.

Best Regards

Yes it can be reprogrammed AT88 and ARM even is full locled ...
But I think u are not in that position ...

Regard's

[damachado]

Yes it can be reprogrammed AT88 and ARM even is full locled ...
But I think u are not in that position ...

Regard's


Why? You say that because of the number os posts i have?
Really judging people by the number of post?

Anyway thanks for the clarification.

Regards

[elchip]

Why? You say that because of the number os posts i have?
Really judging people by the number of post?

Anyway thanks for the clarification.

Regards

No number of post is not important.
I am sorry if you think that !
Simple u need DUMP AT88 and password for it even its new chip.
That you cant find on FORUM'S.
AND I DO NOT OFFER PUBLIC OR PM .

Need to be clear.

I whish u all best.

[damachado]

No number of post is not important.
I am sorry if you think that !
Simple u need DUMP AT88 and password for it even its new chip.
That you cant find on FORUM'S.
AND I DO NOT OFFER PUBLIC OR PM .

Need to be clear.

I whish u all best.

No Problem i didnt ask you for nothing i asked the forum if it can be done and got it.

And if your not here to offer anything and or help ppl that need what are you doing here?

Best Regards

[elchip]

No Problem i didnt ask you for nothing i asked the forum if it can be done and got it.

And if your not here to offer anything and or help ppl that need what are you doing here?

Best Regards

I am here to help and to help me ....
U did not got it I can bit in 1000 EURO to u dint unlocked tool !
AT88 DUMP and pass is on none place for free and if was locked u didnt unlocked it.
And how you think to someone give u AT88 DUMP if he payed for it ...
Do you maybe offer service to you buy project for cash and then upload free on forum ?
Maybe you are millioner and dont know where to spend a money ;-)

[damachado]

I am here to help and to help me ....
U did not got it I can bit in 1000 EURO to u dint unlocked tool !
AT88 DUMP and pass is on none place for free and if was locked u didnt unlocked it.
And how you think to someone give u AT88 DUMP if he payed for it ...
Do you maybe offer service to you buy project for cash and then upload free on forum ?
Maybe you are millioner and dont know where to spend a money ;-)

OMFG we are going WAY off topic here and you are the one not getting it m8.

Where did i asked for the AT88 dump? Please read back and tell where did i asked you for it.

One more thing i bought the clone because i will NOT make any proffit with it and what irritates me is ppl like you dont knowing uther users and judge them by post number. And like you say if i whant to spend more money i will pay for that info.

Like this one for starters --> BIG-SYSTEMS Fahrzeugdiagnose Systeme (http://www.big-systems.net/webshop/product_info.php?products_id=305&language=en&osCsid=lt8jnsqhr75ffri2noitlmn9q3)

You take the time to post that some users cant doit but you wont take the time and kindness to go strait to the matter and help the fellow user.

For me this conversation is over m8.

Wish you nothing bad but please next time if dont have nothing to share or dont whant to share info that have value to you please keep asside.

Best regards

[PremierD]

Now now children .. kiss and make up .. lol

[damachado]

Now now children .. kiss and make up .. lol

LOL no need to go the kissing way thats a bit G**.. LOL

Just expressing my self in a cunstrutive way sort off.. more like a runt.. ehehehe

no hard feelings:manuscarf:

[koziolek]

I agree with [/URL]
damachado
[URL="http://www.digital-kaos.co.uk/forums/members/297273-damachado/"] (http://www.digital-kaos.co.uk/forums/members/297273-damachado/)

[abdullah60]

precious friends
problem with my china made ***8203;***8203;carprog
No connection to usb
What could be the problem
Thank you in advance

[briangsm]

Conect usb cable before programing.
Sent from my GT-I9001 using Tapatalk

[sukkamotton]

hello can i get components diagram on carprog clone mine got one melted when i connect the key antena
picture with mask will be apreciate

[judor]

Conect usb cable before programing.


in detail , plizz

[judor]

has broken pin 55. I can use new At91sams256 ?

[Pakli30]

Mi a baj? My carprog clone dont, olvassa Fiat Stilo 2001 ODBII, ?s ne olvassa 95040 eprom. A9 adapter teszt OK! fenntartva 4 74HC125. K?rem, seg?tsen

[djdanny]

Kicsit er***337;s ide a magyar nem? :D

[Pakli30]

What is the problem?

My carprog clone dont read fiat stilo 2001 ODBII, and dont read 95040 eprom.
A9 adapter test OK!
reserved 4 74HC125.

Please help

[mariazo84]

thanks thanks

[fiz]

It may be useful for someone:ciao:

ESET Smart Security is reporting it as a threat "Win32/Packed.Themida"

Cheers

[fail2ban]

ESET Smart Security is reporting it as a threat "Win32/Packed.Themida"

Cheers
Yes, themida is protector, that's why it's being reported.

Not a virus

[kasim_izmir]

I see many threads opened for carprog reprogramming, so i decide to open another one :)
In attach is solution how to, pictures, instructions, software, all info.
I manage to reprogram with success using a old Wiggler J-tag on LTP. Screen shot attached.
Enjoy your carprog.
Hi friend
Please can you help
I try to write flash , but not success
error message = time out .this means somethins goes wrong
Please can you check picture ? where is the my mistake

BR
kasim

[sepistar]

Hi friend
Please can you help
I try to write flash , but not success
error message = time out .this means somethins goes wrong
Please can you check picture ? where is the my mistake

BR
kasim

actually,i have the same error.how did you solved?
regards

[bricedenice]

hello

I have buy carprog but renault Nec is not active,what can i do?

[briangsm]

hello

I have buy carprog but renault Nec is not active,what can i do?
its normal it a clone :)

hi i have problem witch reprograming carprog i do other carprog many times witch succes its no my first time :)
but this time hjtag dont see target and no erased flash when i conect carprog test i see

yes i try other lib.file its to same




Problem solved lpt port was damaged i change other lib.file and now is ok

[tecautomotive]

what is the solution ?
thanks

[alex535]

have link pls for JTAG programmer?

[datapage]

what is the solution ?
thanks
tecautomotive :solution 12v power plug (http://www.digital-kaos.co.uk/forums/members/110346-tecautomotive/)

[rdu04]

ZL16PRG ? Kamami.com - on-line store (http://www.kamami.com/index.php?productID=23211)

if you are interested I have for sale

[tehnosoftex]

ZL16PRG ? Kamami.com - on-line store (http://www.kamami.com/index.php?productID=23211)

if you are interested I have for sale
We need here arm jtag not avr jtag

[cttorque]

Please can some body explain how this program work?220130

[autocargo]

Looks interesting.... Why don't you upload it here... I'm sure we could come up with something...

[meteor80]

Please can some body explain how this program work?220130


This program is FAKE.

[r_parev]

Is this jtag ok for the job JLINK J-LINK V8 Emulator ARM7 ARM9 ARM11 Cortex-M3 ADS IAR STM32 JTAG | eBay (http://www.ebay.co.uk/itm/JLINK-J-LINK-V8-Emulator-ARM7-ARM9-ARM11-Cortex-M3-ADS-IAR-STM32-JTAG-/360733450196?pt=UK_BOI_Electrical_Components_Suppl ies_ET&hash=item53fd639fd4)

[AGK]

J-link a good programmer.

[Pakli30]

one USB claimed countdown?

[bodzio012]

Somebody know the is new version ? In china website are 5.31?

[EduardNN]

Reflash AT91SAM7S256 programmers can by using the integrated USB bootloader and software from ATMEL - SAM-BA.
Need at the time of programming to replace quartz 18.432 MHz. Close shorted to ground pin55 - erase (to erase the memory), then shorted to ground pin 40 - TST (to upload firmware loader) CarProg connect to USB, the device should appear atm6124.Sys ATMEL AT91xxxxx Test Board. Set at91-isp (http://www.atmel.com/tools/SAM7S-EK.aspx), run SAM-PROG and fill firmware.
Return to the place 12MHz quartz and check the work.

[jomberykaso]

How can i make to reflash my CARPROG clone v4.01?,
i need the pinout for my programmer, could you tell me How can i make it please?

[EduardNN]

Something like this ....
Could he look ...

[Dunker]

Is this jtag ok for the job JLINK J-LINK V8 Emulator ARM7 ARM9 ARM11 Cortex-M3 ADS IAR STM32 JTAG | eBay (http://www.ebay.co.uk/itm/JLINK-J-LINK-V8-Emulator-ARM7-ARM9-ARM11-Cortex-M3-ADS-IAR-STM32-JTAG-/360733450196?pt=UK_BOI_Electrical_Components_Suppl ies_ET&hash=item53fd639fd4)

Don't buy from this clown. link-delight is a rip off. Bad comms and item doesn't turn up !!!

I eventually got one from a seller on Aliexpress.

P.M. me and I'll find which seller I usedf.

[jomberykaso]

MATES HERE IS THE SOLUTION, VERY EASY. THANKS TO DK MEMBERS SASHXXX AND IUSTIN73 FOR THEIR USEFULL POSTS, THEY SAVED MY CARPROG 4.01 CLONE. SORRY FOR MY ENGLISH.

http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/quote_icon.png Originally Posted by iustin73 http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/buttons/viewpost-right.png (http://www.digital-kaos.co.uk/forums/f171/carprog-mcu-reflash-step-step-288814-post2083329/#post2083329)
I welcome all those interested in carprog reflash yesterday I managed to recover carprog with a simple interface all you need f 5 100 ohm resistors and coupling scheme. no need to ***l at88 100% worksAttachment 217976 (http://www.digital-kaos.co.uk/forums/attachments/f171/217976-carprog-mcu-reflash-step-step-100_ohm_jtag.jpg)
245010
http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/quote_icon.png Originally Posted by sashxxx http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/buttons/viewpost-right.png (http://www.digital-kaos.co.uk/forums/f171/carprog-mcu-reflash-step-step-288814-post2100192/#post2100192)
100% working
My stetings
Attachment 221208 (http://www.digital-kaos.co.uk/forums/attachments/f171/221208-carprog-mcu-reflash-step-step-setings2.jpg)

245011

[xtech]

For 4.1 beter use :http://www.digital-kaos.co.uk/forums/f172/carprog-all-up-4-01-reset-unlock-counter-over-usb-398624/index2.html

[Dacha]

Does anyone have a solution to repair CAR PROG interface. After re flashing ARM V4.74 has no connection to USB!

AT88SC25616 read damp with proper interfaces with elnec bee prog!

[eliah]

thanks man you is best :))

[1000tc]

Hi all, I do not know if they are in the post right to ask information about a Carprog.
I own Carprog V5.46 clone complete with 21 adapters purchased almost two years, I have never used and never installed the program, I wanted to ask if I can install the latest version of V 7.28 Carprog if it works or I have to make changes.
Thank you for your answers

[Music73]

Will work but there are no more activations than older software...


Sent from my iPhone using Tapatalk

[7936]

Elchip is right the 88 dump should not be public. A lot should not of been. been out the game little while if some one can get ahold of ray-ray i need location of immo location code in us fiat. If you wanted the dump of the 88 just get a data logger (pirate bus less the 33 usd) program a few chip with different passes log. Comp differences. Or get ida out dis asm. The code and scematics the asians started with were stolen from the company and sold. the 88 is only the only thing keeping cloned asians updated rest is there if you bought a new unit and had some skills. The 33 sbb was able to be fixed but just releasing a write protect let them sell v33 and make pockets fatter. The sdd older clones where better. If the asians clone something or soft is being sold cracked it ok to release. Keygens should not be publics for first year or two on certain soft. If you make a keygen you should share keys. I use to in the us get minimum 200 a job dash immo key us, I gave up for a while people stopped wanting to pay for stuff because mr im ok with working out back of car for pennies. Code was posted for edc17 immo off then every one and there brother broke out vb and tried to make money. Half do not even change right line of code.

[bouizanne]

Hi friends , elchip or 7936 can you help me , my problem is my AT88 was erased can you say me where i can find one programmed thanks by advance

[jhonyelectron]

mate the counter will apear again after couple utilisation !!! every time apears the counter i reflash the arm!!!