Suzuki swift All key lost

[chinhi]

Suzuki swift All key lost
Please Generate ID46 i write manual chip
Suzuki Swift 33910-73ku

[bram380]

read transponder 46 & post here

[chinhi]

Key1
0.C7 E5 73 18
1.4D 49 4B 52
2.20 58 4F 4E
3.06 AA 48 54
4.46 5F 4F 4B
5.55 55 55 55
6.AA AA AA AA
7.FF FF FF FF

[nasir]

what is this so many digits how many keys cunfusing.

[koncimobil]

here new dump & with key1

[chinhi]

key immo led blink car not start

[keygargoil]

that is because the crypto key and transponder tmf bit is not set to byphase

[chinhi]

Please how to program crypto key ID46
All DK master teach me

[malczykos]

What year is this Suzuki?
I did a lot of Suzuki models with transponder ID 46 coding keys via OBD connector.
You must use a clean transponder PCF7936 manchester mode.
You can code it using the SBB, MVP Pro, etc.
Tested on Swift `07 `09, Splash `10, SX4 `09 with keyless system.

[chinhi]

My Suzuki swift 2009
I test SBB, MVP not connect ECU
2005 Swift OK to program SBB

[raj03]

u can use launch x431 scanner and u can easily code suzuki key .....u just need pin code for it ...

[shitad]

u can use launch x431 scanner and u can easily code suzuki key .....u just need pin code for it ...


I also have this problem with 2006 up Suzuki with ID46 key where Sbb and T300 will not connect to the immo, yet it will do up to 2005

Question how do we extract the Pin code ?
I have Launch X431 but never tried it on these Suzuki before.

[ajayrao]

hello
"raj03 u can use launch x431 scanner and u can easily code suzuki key .....u just need pin code for it ... "
from where can i get codes ,apart from dealer ,does a calculator exsist?
best regards

[kyawkyaw]

hello.please .how to make a new smart keyfor toyota passo.please help me someone.thank you very much all friend:)

[Bllinda]

I think that the code can be found in ECU or BSI ....
and here is the default ....


hello
"raj03 u can use launch x431 scanner and u can easily code suzuki key .....u just need pin code for it ... "
from where can i get codes ,apart from dealer ,does a calculator exsist?
best regards

[maro900]

Question abou suzuki splash 2012 keyless akl.

I managed to coded key and engine start fine. problem with remote. I try two second hand keys and can not programed. procedure of programing is ok, central locking is flicking but remote won't be accepted. Any idea why? I spoke with suzuki dealer and they think it could be bcm. any help?

Thank you

[Weasel3]

If black large Keyless key.

Keyless - the instruction in the tool, is probably wrong doing the programming of remotes.

Instruction, is for the ignition key type.
Not the Keyless version.


Found out this myself, a while back.

[maro900]

If black large Keyless key.

Keyless - the instruction in the tool, is probably wrong doing the programming of remotes.

Instruction, is for the ignition key type.
Not the Keyless version.


Found out this myself, a while back.


I'm doing ignition on then off and key removed. door close open 3 times, ignition on off key removed. central lock flicking and pressing unlock on remote.

After this nothing is happening.

[Weasel3]

I'm doing ignition on then off and key removed. door close open 3 times, ignition on off key removed. central lock flicking and pressing unlock on remote.

After this nothing is happening.

This is probably, not the right method.
This is for the ignition key, remote programming.

Door should be closed, all the time.
You find it, on the tube videos.
There is one very good instruction video, out there.