Problem with Autocom - Cant change serial

[DragonTrainer]

Hi all!

I have a little problem when I try to change vci serial, because I get error "Transmision error" when I click on READ SN, what can I do?

Thanks.

[lexa-dok]

try on another windows

[smirnoff_rules]

and check in device manager that the drivers have installed right

[DragonTrainer]

Thanks for your answer.

But both things are confirmed. I tried on W7 and XP and drivers are installed right :(

Another idea?

Thanks!

[smirnoff_rules]

and your plugged into a car with a good 12v in the battery

[enigmauk]

Your probably using a 6 digit serial number device... is yours CDP+?

[DragonTrainer]

I am not sure :$, what is difference?
Thanks for your help ^^

[smirnoff_rules]

mine had a six figure number and changed to 5 without a problem

[paro44]

cdp+ (6-digit) is usually with one pcb inside, the older cdp have two pcb.

[DragonTrainer]

Hi again.

I can activate and VCI is detected with 2011 version but I cant with this one so I tried to change serial with that tool.

I used this information to register and activate:
a-710-479 - JJKLPRJKVIBP - 20418

Another idea to solve this?

Thanks for all guys.

[smirnoff_rules]

if the serial isnt blocked cant u install again using the 6 numbered serial

[786mo]

I have a 6 digit and couldn't change but then realised that my serial wasn't banned anyway

[DragonTrainer]

Problem is VCI is not detected :S...

[smirnoff_rules]

still sounds like a driver problem to me ? mine did this and l realised it was still installing drivers then it worked fine

try this

AUTOCOM NO VCI FOUND Problem Solved!!!


GOOD NEWS NOW AUTOCOM WORK PERFECT ....BLUETOOTH OK
ALSO PROBLEM SOLVED VCI NOT FOUND ....SOLVED THIS PROCEDURE I DONE


Simple Steps as follows:
1. Disconnect from internet
2. Delete folder with all files in it: "c:\Documents and Settings\USER\Application Data\Autocom
3.Delete folder with all files in it: "c:\Documents and Settings\All Users\Application Data\Autocom
4. Start Main.exe, reactivate software and you're done!
5. Most important, stay off line from the internet.

[DragonTrainer]

So problems with "VCI not found" are not for serial number issues?

Thanks for your answers

[piscinarasx]

vci found but I can not change the seriale.il tool gives me error transmission.

[Youneselm]

please stop fouling around!!!!
This is your fix.
1, plug in youre vci
2, start program
3, update youre vci firmware.
job done!!!
Now you can change back serial,;-)

[smirnoff_rules]

wot do u mean


Now you can change back serial,;-)