4a63 EWS MANIPULATION on 320td e46 compact, wont start

[gomarota]

Hi i tried to do sync dde-ews with inpa, with carsoft, with pasoft 1.4...

i have

progman
isis with ista p and ista d
inpa
winkfp
ncsexpert
pasoft bmw scanner 1,4
dis 44 and dis 57
ktag with full backup eeprom+mcu+flash
ews backup with xprog

so i think i have a lot of equipment but nothing works

and i tried everything, updating dde, clearing fault codes, resync ews dde

i cannot solve this

on dde error is

4a63 EWS MANIPULATION

on ews there is no error



engine crank but doesnt start, can anyone help me?

made on two cars same problem :S

320td compact e46
330 e46


192211

[bearheroes]

post dumps of ews.which ecu you want to use?

[gomarota]

Thanks for reply i attach three photos

the 320 we had to change from ecu 320-1 (ORI) to 320-2(second hand ECU).

the 330 is its original ECU.

EWS dumps attached inside too

regards

192304

PS2: i changed all ECU info (MCU+EEPROM+FLASH) with KTAG from 320-1 to 320-2

PS: added rep ;)

[bearheroes]

use these,try to realign with gt1 and post results.

[gomarota]

Will test and post results thanks mate ;)

[gomarota]

doublepost

[gomarota]

this post was edited

[gomarota]

worked perfect on 330, on 320 not i think because ecu swap, i will try to find the same ecu and clone the dumps


Thanks mate!

[maaxxyy]

Hi post both ews and matching ecu files for both sets.

[bearheroes]

for the 320 the allignment was successful or not?

[elephantul]

to gomarota, empty your pm box to receives another pm, and soft for reset roling codes is EWS EDITOR,is in DK and free,search good

[gomarota]

thanks both for replies

320 i think i have incompatible ecu. im searching one with same numbers


i have other car with same problems. this is the third one, bmw 320 d e46

i will search for bmw ews editor192981

[gomarota]

attached info for the first 320 ecu swapping from
donnor

edc16c1-4.31
0281012091

to

edc16c1-4.1
0281011122

thanks all rep added

[bearheroes]

you have files from 3 ecus
which one you want to use?
0281 010 256
0281 011 122
0281 012 031

[gomarota]

i had 0281011122 original on car but i broke that ecu so i need to make it working with 0281012091 ecu

[bearheroes]

try these.eeprom from 0281 012 091.sync and report.

[gomarota]

thanks i will try and report

which flash and mcu should i use donnor or original car?


can someone help me with other car bmw 320 too

0281010565

4a42 ews interface error


ews and dde eeprom attached

[bearheroes]

use everything from 0281 012 091.
and try the new files for the other 320 and report.pass is the same.

[gomarota]

tried files on the other 320 but still same 4a42

tried to clear errors with inpa and no success
tried to reset sync code and says error ecu rejected
tried to sync code with carsoft it says its ok but it isnt

engine doesnt crank

[bearheroes]

if it doesn't crank the problem is between ews and key.can you program a new key?

[gomarota]

we tried with different ews and different dde with same numbers and didnt work. in ews there is no error.

tried to rewrite ews with pasoft writting the keys that i readed in ews dump and still same error.

the problem i think is resync whem i try reset with inpa it says error ecu rejected.

its possible to do a kind of resetting on dde eeprom'?

[gomarota]

solved the second 320 the problem was in the key

[gomarota]

three bmw?s with similar problems fixed. thanks all and thread can be closed

[zekhrouf]

Hi
Here is my cas3 black and ecu edc16c1 eproms from E60 530D
help me to sync them

[bearheroes]

write this and sync

[zekhrouf]

write this and sync
password please

[Xanadul]

Hi.I got 4a63 EWS MANIPULATION on 320td e46 compact. Engine crank but no start.

I have tried to do sync dde-ews with inpa, but no success.
ews backup with carprog using A11 cable. I guess that this is not the entire content of EWS EEPROM. Is there a chance to the complete complte reading of ews eeprom with carprog, with other cables from carprog (since the mempry needs maybe a spi interface or so?)
I got 4a63 EWS MANIPULATION, but I have only CARPROG.
What other interfaces should I use, if carprog is not enough?

Thanks