DreamUP 1.3.3.4

[artman_hacker]

Download Link :

http://www.dmmtv.de/download/DreamUP.zip

Good Luck

[Devilfish]

Thanks...added to our download section. :)

http://www.digital-kaos.co.uk/forums/downloads/other/8/dreamup-1-3-3-4-672/

[krazylegz]

I BEEN LOOKING FOR THIS EVERYWHERE YOUR A STAR MATE


please turn off you're caps lock....looks like you're shouting;)

[kupratap]

Hi Is this software Dream up for Dreambox 500s, please advice, thank you

[westkill]

Hi Is this software Dream up for Dreambox 500s, please advice, thank you

yes m8 for any dreambox
but you might find different versions work better on some dreamboxes :)

[eggonos]

When I open it it shows dream up 1.3.3.5

[tpiris]

I have the same problem with a Dreambox DM7000. Is the solution the dreamup version 1.3.3.4?

[bh2362]

When I open it it shows dream up 1.3.3.5



im having the same problem with 1.6.6

Rick

[ianmaxq]

how do you get the backup tab up
use dream box 800 hd pvr clone?

[vini76]

can some one help ? how to flash my openmedia box please

[EAMO 2]

can some one help ? how to flash my openmedia box please

Use dream-up & null modem cable, preferably a PC with serial port
as USB-SERIAL leads can be problematic with dream-up.
Set box to cable & install image.
Power off box & power on again.
Set box to sat & install image.
DK 1.1 is a good image for cable & sat
PLI-JADE can also be used on cable & sat. Also has better menu
in internet add-ons.
When flashing image to Open Media follow instructions for
flashing Dreambox 500.
You can use 2 diff. images on Open Media box if you wish.
Just be sure images are clone-safe

[mercurialzzz]

up!

does this work for DM500C?

[EAMO 2]

up!

does this work for DM500C?
Yes it should be OK. If not try this version or older version
Digital Kaos - Downloads - dreamup 1.3.2.1 (http://www.digital-kaos.co.uk/forums/downloads/other/8/dreamup-1-3-2-1-1389/)
You will save yourself a lot of grief if you use PC with RS-232
serial port and null-modem cable ONLY

[Krzkiller]

thx a lot for the up
Question; sorry bt when i open the dream up it says "ERROR: can't find any COM ports - aborting!"

[EAMO 2]

Question; sorry bt when i open the dream up it says "ERROR: can't find any COM ports - aborting!"
You probably need to adjust com-port setting on PC. Set RS-232
serial port to 1,2,3,or 4.
Read HI-Tech's thread on com-port settings in KVU sevtion
http://www.digital-kaos.co.uk/forums/f99/kryptview-firmware-loading-guide-tutorial-42524/

[EAMO 2]

:giveup::giveup:

What's your location. No keys work on Nagra 3 in UK or Eire

[Dracular]

http://img222.imageshack.us/img222/2865/capturearm.jpg (http://img222.imageshack.us/i/capturearm.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)

why do i get aborted after about 2 %???????????????
whether i flash backup image or pli jade image, i get the same error

[Bulld0g]

Use a different version of dreamup

[EAMO 2]

http://img222.imageshack.us/img222/2865/capturearm.jpg (http://img222.imageshack.us/i/capturearm.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)

why do i get aborted after about 2 %???????????????
whether i flash backup image or pli jade image, i get the same error
As Bulldog says use earlier version for DM500;
Digital Kaos - Downloads - dreamup 1.3.2.1 (http://www.digital-kaos.co.uk/forums/downloads/other/8/dreamup-1-3-2-1-1389/)
I think this one works for DM500, if not use earlier version in
DOWNLOADS. Also try to use null-modem ONLY from RS-232
port on old PC. Dream-up doesn't like USB-RS232 leads

[maxfromoz]

Hi.
This is a good post but hopefully someone can help me or direct to right place.
I have DM528s and it died after one week. The green light is on but nothing on TV. Front power button does not turn it off and remote does nothing.
I used dreamup and flashed it using a lot of different files.
Now it turns on and starts to load, but then freezes as the TV setup screen comes up. Still front power button and remote do not respond.
Can anyone help me.
I am in Sydney Australia.

[EAMO 2]

Hi.
This is a good post but hopefully someone can help me or direct to right place.
I have DM528s and it died after one week. The green light is on but nothing on TV. Front power button does not turn it off and remote does nothing.
I used dreamup and flashed it using a lot of different files.
Now it turns on and starts to load, but then freezes as the TV setup screen comes up. Still front power button and remote do not respond.
Can anyone help me.
I am in Sydney Australia.
You need to use dream-up to flash new image as you have
corrupted image. You only use 1 file with dream-up, image file.
Any add-ons to image are done on-line or by FTP Read this
http://www.digital-kaos.co.uk/forums/f34/guide-how-use-flashfxp-ftp-your-dreambox-1307/
Take a look here also
Digital Kaos - Downloads - Dreambox (http://www.digital-kaos.co.uk/forums/dlcat-dreambox-1/)

[EAMO 2]

Thanks!!!!!!
Also read all threads in RED on this page
Cable Dreambox (http://www.digital-kaos.co.uk/forums/f34/)
If flashing DM500 try dream-up 1.3.2.1

[maxfromoz]

I tried other images still hanging and nothing responding. A silly question. Im using a serial cable. Could this be the problem and should I be using a null modem cable DB9F-DB9F?

[maxfromoz]

Having said that, I still use Dremaup and it communicates fine with my DM and tells me everythng completed successfully.

[EAMO 2]

I tried other images still hanging and nothing responding. A silly question. Im using a serial cable. Could this be the problem and should I be using a null modem cable DB9F-DB9F?
Would help max if you posted location & box model. Anyway I
went back thru earlier posts & you're from AUSSIE & you have
DM528s box. Dream-Up 1.3.2.1 should be suitable for that box
if not it won't flash & will say ABORTED BY USER. Try flashing
box again & say NO to FLASH ERASE. Is image file img type
Am sure cable you are using is null-modem as loader would not
even try to flash box if you used straight serial cable.
If you are still having difficulty post back with original image &
Names OF IMAGES YOU HAVE TRIED. Usually when box freezes
it's bad flash or wrong image. Just need to check are you using
cable or sat feed for this box. This box is for sat only, so image
needs to be for sat box NOT cable. Try PLI website or you could
try ChinaDreambox website. If need image call back in afternoon
GMT I will send you image

[kadnor]

Would help max if you posted location & box model. Anyway I
went back thru earlier posts & you're from AUSSIE & you have
DM528s box. Dream-Up 1.3.2.1 should be suitable for that box
if not it won't flash & will say ABORTED BY USER. Try flashing
box again & say NO to FLASH ERASE. Is image file img type
Am sure cable you are using is null-modem as loader would not
even try to flash box if you used straight serial cable.
If you are still having difficulty post back with original image &
Names OF IMAGES YOU HAVE TRIED. Usually when box freezes
it's bad flash or wrong image. Just need to check are you using
cable or sat feed for this box. This box is for sat only, so image
needs to be for sat box NOT cable. Try PLI website or you could
try ChinaDreambox website. If need image call back in afternoon
GMT I will send you image
Hi,
For a DM 800HD pvr(clone)- just installed with Rami Maher GP 3 blue panel + VTi panel Sim 2,01 SSl 76 D. What version of Dream Up would be suitable ?
Will it Flash / Erase.
Thanks in anticipation.

[kadnor]

yes m8 for any dreambox
but you might find different versions work better on some dreamboxes :)
on Dm 800HD pvr cloen, which FLASF / Erase version, I should utilize ??
Thanks for your guidance

[satjojo]

Hi,

i tried with root.cramfs but it dousnt work, i can only get "softwre upload" in my menu, not something like manual....and the box find anything, help.....

[EAMO 2]

Hi,

i tried with root.cramfs but it dousnt work, i can only get "softwre upload" in my menu, not something like manual....and the box find anything, help.....

Best way to flash box is with Dream-Up loader, look thru this
http://www.digital-kaos.co.uk/forums/f34/guide-flashing-dreambox-dreamup-33/

[javabean]

Originally Posted by Devilfish http://www.digital-kaos.co.uk/forums/images/styles/digital/buttons/viewpost.gif (http://www.digital-kaos.co.uk/forums/f39/dreamup-1-3-3-4-a-33285-post173669/#post173669)
Thanks...added to our download section. :)

Digital Kaos - Downloads - DreamUP 1.3.3.4 (http://www.digital-kaos.co.uk/forums/downloads/other/8/dreamup-1-3-3-4-672/)
I have a DM500S dreamup 1.3.3.7 gives error , will try the older version .

[abuahmed]

Download Link :

http://www.dmmtv.de/download/DreamUP.zip



please someone who has experience with Universal Dreamup show me how this program making flash erase?
thanks

[myownlab]

You probably need to adjust com-port setting on PC. Set RS-232
serial port to 1,2,3,or 4.
Read HI-Tech's thread on com-port settings in KVU sevtion
http://www.digital-kaos.co.uk/forums/f99/kryptview-firmware-loading-guide-tutorial-42524/


RS 232 cable has connected, i need to get view data in my pc please help:joyman:

[EAMO 2]

RS 232 cable has connected, i need to get view data in my pc please help:joyman:

Few things to double-check Myo
Unplug Dreambox power cable from wall socket until prompted by
Dream-Up loader to turn on Dreambox.
BOX ALIVE & TALKING means rs-232 null modem is connecting,
and you will notice activity on PROGRESS BAR
:party:

[myownlab]

Few things to double-check Myo
Unplug Dreambox power cable from wall socket until prompted by
Dream-Up loader to turn on Dreambox.
BOX ALIVE & TALKING means rs-232 null modem is connecting,
and you will notice activity on PROGRESS BAR
:party:
Is there any idea with Prog DVB in PC to view channels through signal received by RS-232 (Starsat Model srx-120 D)..!!!! I m trying without any tuner card... (Do u knw magic..?!)

[domirudi]

this is not dream up 1.3.3.4 but 1.3.3.9
why?

[benny/9]

this is not dream up 1.3.3.4 but 1.3.3.9
why?
****************************************
it's probily been changed for the 1.3.3.9 loader
that is the latest version for genuine dreambox models,

[domirudi]

and for clone which is best?
when can i download it?

[Pjang]

can i download dreamUp into Mac?

[Pjang]

how install dream up into Mac?

[EAMO 2]

how install dream up into Mac?

Am sure you can, but save yourself lot of hassle by using old P.C.
with rs232 port:champions:

[Pjang]

So how? Can you tell me which files i should download?

[EAMO 2]

and for clone which is best?
when can i download it?

DK1.1 or PLI-JADE are good cable images for clone boxes:ridinghorse:

[EAMO 2]

So how? Can you tell me which files i should download?

If using old PC try Dream-Up 1.3.2.1 for clone boxes & use DK1.1
or Pli-Jade image for clone boxes. Use Flash-FXP program to edit
folders on image as it's simplest method of FTP for Dreambox.
:flybye:

[extremis]

Thank you very much