Autocom CDP Pro not connect in vehicle

[leandrotsampa]

Hi guys, I need help with a CDP Pro Bluetooth.
He does not connect in any vehicle, already tried using versions 2011.3, 2012.2, 2012.3 and 2013.1, and none of them worked.
Firmware upgrade and Test OK, normal functioning but still does not connect in any vehicle.


I tried on:
Fiat - Palio
Fiat - Uno
Renault - Master 3


Any idea?


And tried with CDP + these cars and it worked.

Thanks for help

[gazvts]

check the pcb for bad connections/solder or missing parts

[svetlin09]

has exchanged pins cable. check

[svetlin09]

okie or missing chip tester.problem auto com

[leandrotsampa]

has exchanged pins cable. check
Cable OK.


okie or missing chip tester.problem auto com
OKIE Chip OK.
Chip Teste?

I will check if it has no sloppy soldering.

[scs-mem]

Oki chip is for pwm ford protocol.
You have problem with k-line.
You must test on can bus car too.
Regards

[dimmy68]

I have the same problem with CDP+ (new VCI- single board) and delphi 2013.1. Interface doesn't connect with ABS module in 16pin OBD, but via k-line 2pin socket connection is perfect. I'm looking for circuit or already known fixed bugs. I checked interface for cold junctions, found nothing. :beer:

[gazvts]

software or try upgrade license only on delphi
Brand: Delphi
Software: Cars
Version: 2.13.1
Serial: 100251


Key(s):
DieselMax : LBDLPTSVHNIM
GWM : ERCKKCNTESAS
GWM_MAX : EJZBPOTXOCWD
HardwareKey : OUQFPFEBUHBK
MaxModule : KNJSIQQBPEHP
TurboCharger: GDFUTFDHXGIP

[dimmy68]

Hi gazvts, I enclose picture of my license view. I don't think there is something unusually.
Best regards!
200111

[alle bmw]

Autocom CDP Pro se conecta en el veh?culo

[aprilia40]

hola,mi interface de autocom se queda con la luz roja cuando lo conecto al ordenador y no me funciona el programa
por favor ayudarmeeeee,muchas graciasss

[dopsleutel13]

hola,mi interface de autocom se queda con la luz roja cuando lo conecto al ordenador y no me funciona el programa
por favor ayudarmeeeee,muchas graciasss

You must also connecting to the car :stupido2:

[PacMar]

I have the same problem with CDP+ (new VCI) and delphi 2013.1. Interface doesn't connect with VW Crafter.
VW Sharan -worked.
Ford Galaxy -worked.
Firmware upgrade and Test OK,
normal functioning but still does not connect in any vehicle!

What to do?

[dopsleutel13]

I have the same problem with CDP+ (new VCI) and delphi 2013.1. Interface doesn't connect with VW Crafter.
VW Sharan -worked.
Ford Galaxy -worked.
Firmware upgrade and Test OK,
normal functioning but still does not connect in any vehicle!

What to do?
crafter should work from year 2006 , even generic eobd 2.5 engine common rail .
sometimes disconnect hardware from car and usb and try again wil help sometimes ..

[jakesman]

hi all
have the same problem with Autocom CDP with OKI chip was sold with VER 2011.1
VER 2011.3.5 read all modules on CRAFTER
VER 2012.3 read all modules but not engine ECU (2.5l) on new crafter 2.0l amarok engine it is fine but not read the ABS
VER 2013.1 do the same as 2012.3
Firmware updates work fine no problem there
ANY IDEAS ?

[ludbe]

hi, i have the same problem with golf 5tdi and many others cars. TEST and firmware update is ok. When i click generic OBD is working normaly, but when i click OBD it dont work. But i heard relays clicking inside. i have tried one honda accord 2007 and only this car was working OBD normaly. what is wrong? maybe k-line? it is 2012.3 version

[dopsleutel13]

hi, i have the same problem with golf 5tdi and many others cars. TEST and firmware update is ok. When i click generic OBD is working normaly, but when i click OBD it dont work. But i heard relays clicking inside. i have tried one honda accord 2007 and only this car was working OBD normaly. what is wrong? maybe k-line? it is 2012.3 version

When playing with cars sometimes the software in the tester does not know what you are doing . disconnect the tester from the car and pc/lappytop and wait a moment and try again . (most of the time its work again)

[ludbe]

tried many times, no luck

[dopsleutel13]

tried many times, no luck
You can install 2013.2.2 and try it again .
Remember some vci + has blocked serial and by problems you must update the firmware in 2012.3 (copy the 2013.2.2 firmware in installed 2012.3)

[jakesman]

hi i was strugling with this one and got it solved , sold my 2011.3 version at a good price and got myself a new TCS unit with ver 2013.1 and delphi 2013.2 , so the conclusion : spend the $$$$ and get the real deal or keep on upgrading on half baked chinese clones :sheep:

[gazvts]

Wait till 2014 everything will be alot different

[dopsleutel13]

Wait till 2014 everything will be alot different
Tel me more about this ?:joyous:

[mesrine_29]

Wait till 2014 everything will be alot different
Me too :top: