vw 1.6 siemens simos 3.3....93c76 read 061 906 033....5wp40019 07....need immo off

[kugglefischer]

attached below is the 93c76 read from a simos 3,3

06a 906 033
5wp40019-07

please can i get an immo off file that works 100% please.....

thanks guys!

k203676

[vmax]

Please, no password

[kugglefischer]

Please, no password

HI
I made those same changes like in your files.....Unfortunetley, itdosnt start!

thanks...

Lupu...Yugo45???

help.....:top:

[vmax]

ok, now this file ;)

[icezero2010]

is this a 2 plug ecu ???

[kugglefischer]

ok, now this file ;)

im sorry to dissapoint you again......ive tried all the tools your trying...volta didnt make it start either!

again thanks for trying....

i think this is something different?
because i cant see the vin in my 93c76 dump either......

k

[kugglefischer]

is this a 2 plug ecu ???

yes,
i mentioned simos 3,3......

[icezero2010]

yes your readout looks not good . the eeprom is 16bit .

[kugglefischer]

yes your readout looks not good . the eeprom is 16bit .

would you have a good 93c76 immo off file tested for this ecu number....?
i figured something isnt right.....because im the 2nd ...guy trying this , so this read could be currupted......

any chance to help?

thanks

[yugo45]

Simens ECU works 50/50 with immo off.
Best way is to adopt it to cluster and keys.

What year is that car?

[icezero2010]

your methode work on all simos 3.1 ,3.2 .......

the way is right but the dump is wrong :-)

the only way is to found a correct eprom

[kugglefischer]

Simens ECU works 50/50 with immo off.
Best way is to adopt it to cluster and keys.

What year is that car?

HI BUDDY....

glad you are here!

the car is a 2000 model....
simos 3,3....

strange that they work 50/50.....

im hoping you can do some magic......

thanks

[vmax]

This is file to solved your problem, but must translate file in *.rar to your language. Pass send to PM

[kugglefischer]

This is file to solved your problem, but must translate file in *.rar to your language. Pass send to PM

HI VMAX...
Thanks!
This looks different.....i think we will be ok!
i will test and let you know m8....

appreciate your help!

k:top:

[kugglefischer]

your methode work on all simos 3.1 ,3.2 .......

the way is right but the dump is wrong :-)

the only way is to found a correct eprom

i looked at a few of these simos 3,3...they all look like mine....
its a difrent dump to simos 3......

thanks for the info m8....:top:

[yugo45]

HI BUDDY....

glad you are here!

the car is a 2000 model....
simos 3,3....

strange that they work 50/50.....

im hoping you can do some magic......

thanks
My personal opinion for Simens and MM ECU is to adopt it to car.
In this case this is Immo 2 and it is very easy to adopt it to Dash ,this ECU does not have Pin , VIN or CS.
All you need is pin form Dash and VCDS.
If you can read EEprom of the dash , post here and I will give you Pin and instruction how to adopt it.

[cristecristian]

Can someone help me with my program did imoo off this horse? Siemens 5wp40035 02Simos 3.4a 0002? or to be read to Post?

[kugglefischer]

post your dump.....
should be a 93cxx........

[cristecristian]

204645204645please help me with this machine off imoo VW Passat 1.6 petrolsiemens5wp40035 02 simos3.4 002

[semga]

This is file to solved your problem, but must translate file in *.rar to your language. Pass send to PM
Can I have this pass too, please?

[kiszka]

...............

[kiszka]

...............

[anmayu]

Buenos d?as amigos, tengo una Siemens 5WP40194 05 (Somos 3PE) tiene una eprom 93C76 no veo manera de hacer un inmo off.El veh?culo es un VW Polo 1.2 Alguien me podr?a ayudar? Un saludo a todos y gracias de antemano

[vladanr]

post your dump,read in 16bit