View Full Version : Chrysler Voyager 2,4i 2004 ECU, Immo location/how to read?
soxten
24th July, 2013, 12:28 PM
Hi
I have a broken ECU on Chrysler Voyager 2,4i 2004 and need to change to a used one.
Is immo in Eeprom or MCU?
please look at my piture and mark the chip
ECU info
p/n P04748376AD
abdulrauf
26th July, 2013, 01:31 PM
check the back of ecu fine 8-pins ic 95080 read it it contain vin edit the car vin and write back. the new ecu will start your car.
soxten
26th July, 2013, 01:33 PM
Thx!
Is it no immo in ECU?
Do system only check so it is correct vin in ecu?
soxten
29th July, 2013, 11:04 AM
I have look at the backside of the motherboard but can`t find 95080
I have 2 Eprom
36077AA 9322L
8613AA 3C2D9 H347
?
qubits
17th June, 2014, 02:58 AM
soxten, did you ever find out which one is eeprom?
soxten
17th June, 2014, 07:40 AM
Read as 95040 Eeprom
If car has automatic gearbox you have one Eeprom on both side.
If i remeber correct Eeprom is fitted in one of the corners of the pcb easy to desolder the one on upper side/top.
The Eeprom on underside/lower side is funny :) remove the gel and lift up pcb :)
Christian Johansson via Iphone 5s
Min2xx
17th March, 2017, 07:36 AM
I solved the similar problem with 3.3 engine, 36077AA= M95080 eprom and have 2 locations in both sides, and both have immo data ( VIN )
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.