Delphi 2013.2 problems

[luke1233]

Hi i have downloaded delphi and autocom 2013.2 software both with same problem, i install, patch and use update1 but then when i click settings and click hardware set-up the configuration box does not show i have tried this with the vci plugged in and with both software.

Is there something im doing wrong i have upgraded licenses on turbocharger and dieselmax as instructed and i have renamed the Wyupdate to wyupdate1.


Need help pleaseeeee

kind Regards Luke

[dopsleutel13]

Help is here .
Autocom -Delphi 2013.2
CLEANING OLD FILES OF PREVIOUS version Autocom:


WINDOWS XP:


1. Before start new installation of Autocom, first DEINSTALL OLD version of Autocom


2. Find and MANUAL DELETE this files
(where = autocom is Delphi (if Delphi was installed)


C:\Programs\Autocom\
C:\Documents and Settings\All Users\Application Data\Autocom\
C:\Documents and Settings\**USER**\Application Data\Autocom\
C:\Documents and Settings\**USER**\Application Data\Microsoft\SystemCertificates\My
C:\Documents and Settings\Default User\Application Data\Microsoft\SystemCertificates\My
C:\Documents and Settings\LocalService\Application Data\Microsoft\SystemCertificates\My
C:\Documents and Settings\NetworkService\Application Data\Microsoft\SystemCertificates\My


3. Open and "Edit" function via Notepad:
C:\WINDOWS\system32\drivers\etc\hosts


then DELETE:
127.0.0.1 activation.autocom.se
127.0.0.1 activation2.autocom.se
127.0.0.1 updates.autocom.se


then via command "Save" you save new editing Notepad files.
NOW YOU WILL HAVE "UPDATE" FROM INTERNET !


4. Run CCleaner and delete registar files.


5. Restart PC.


6. Finally, start install new Autocom 2013.2 version


7. After finish installing,copy Patched main.exe to replace original program-map


8. Start Autocom, go to activation, klik on "Start"..and save the xml file for activation , then after activated xml file you see of Autocom "Main screen"
__________________________________________________ _________________________


WINDOWS 7 & 8:


1. Before installing the new version 2013.2, first uninstall previous versions
If we have installed 2013.1 + we have the "error" after clicking on "start" activation , then "operation failed" you must:


2. Delete the following folders:


C:\Programsx86\Autocom\
C:\Programsx86\Delphi\
C:\users\**USERNAME**\AppData\Roaming\Delphi\
C:\users\**USERNAME**\AppData\Roaming\Autocom
C:\users\**USERNAME**\AppData\Roaming\Microsoft\Sy stemCertificates\My


3. Now we can start the first time delphi or autocom with or without internet connection. Same result.
:top:

[luke1233]

I have done all that but still a no go, going to re-install windows xp tablet edition and try again next week so i will report back with any problems:)

[dopsleutel13]

I have done all that but still a no go, going to re-install windows xp tablet edition and try again next week so i will report back with any problems:)
You have to set in Map settings see system files and show extensis for know files .
Unles you still can't find special maps and files .
:top:

[luke1233]

Sorted with fresh install of windows xp tablet edition, Now running delphi 2013.1 not brave enough for 2013.2 yet ;P