AUTOCOM 2013.3 DOWNLOAD AND INSTALL INFO

[gazvts]

go to manage attachments select from the list
again sorry guys

[morosan4]

NS 30250
ID a-710-479
nHARDWARE rel1 AJVPYMEKPPDK
rel3 MNZTTOOCNHVE
THANKS GRACIAS

[dimmy68]

Hi GAZVTS,

would you activate xml file for Trucks?

Thank you in advance! :beer:

[Larue]

May i ask for activation for Delphi cars 2013.1 as well,please?
Thanks
Larue

[gazvts]

Sorry guys I wiped my PC of everything miss red and blue

[piscinarasx]

HELLO, COULD YOU ACTIVATE MY XML FILES. THANK YOU IN ADVANCE.195710

[mecdoc]

Please activate Delphi Cars 2013.1
thank

[koki]

195736Would need activation file for autocom 2013.1 I installed it on a computer the Delphi 2013 and all perfect, but now I want to see are the differences between the two.
thank you very much

[antoniliev]

delphi 2013.1
CARS
30252
OBINOREMMEHZ

[kennedy-afn]

Good night! My serial is 100251. I got the Hardware-Key (HW-ID) to install cars and trucks Installed everything OK Now I want to install a third option would be "GENERIC-OBD" that comes on the installation DVD. The problem is that the Keygen only have the option of getting the Hardware-Key (HW-ID) only for cars and trucks. How will I get the Hardware-Key to activate (GENERIC-OBD)? For cars and trucks is already activated. Thanks: Kennedy.

[folle82]

activate Please Delphi 2013.r1


195824
195869



thank

[jr59]

Please, i need a activation file!
It's for cdp+ 100251 OUQFPFEBUHBK
thank you195825

[jr59]

Please, i need a activation file!
It's for cdp+ 100251 OUQFPFEBUHBK
thank you
195826

[folle82]

activate Please Delphi 2013.r1


195844
195870


thank

[dopsleutel13]

Info delphi :anonymous:>>hh (https://www.rapidshare.com/files/396993129/happy.rar)appy

[antoniliev]

link for delphi :)

[dopsleutel13]

link for delphi :)
http://europe.delphi-dso.com/downloads/private/car%20diagnostic/PC/CurrentVersion/DSCars_HeavyDuty.zip

Here by the creator

[antoniliev]

dopsleutel13 (http://www.digital-kaos.co.uk/forums/members/71649-dopsleutel13/) is this some patch

[dopsleutel13]

With that you need to activate !!! but this one Download here way (http://www.sendspace.com/file/nltuaa)
install delphi
install patch
run delphi, put ID and hardwarekey
and go on next
and then you are happy. :anonymous:

[antoniliev]

but i`m not happy :)

[turbocip]

With that you need to activate !!! but this one Download here way (http://www.sendspace.com/file/nltuaa)
install delphi
install patch
run delphi, put ID and hardwarekey
and go on next
and then you are happy. :anonymous:

after id and hardware key ... from Autocom .... where is software to activate xml file ?

[dopsleutel13]

after id and hardware key ... from Autocom .... where is software to activate xml file ?
Close internet and push the big button and let the system activate himself ! :sleep:

[ramirez2]

does not work ... ask me activation:apologetic::apologetic::apologetic:

[adam13]

Please activate
thank
delphi 2013.1
CARS
30222
YFCWPKVFSAQC

[dopsleutel13]

does not work ... ask me activation:apologetic::apologetic::apologetic:
Mate
After you'll do it you'll see how easy it is
Run the softwear and use the steps
In the end use the Activation button
Take care NO INTERNET CONNECTION
This patch will let you to activate not using the xml file
Good luck


(extra info: (1434, 1985, 2152, 7306, 12345, 30002, 30250, 39071, 55296, 100251) are on the blacklist)

[druzgotor]

Hi:)

please activate,

AutoCom CARS 100251 OSIFKCIGBOCT
AutoCom TRUCKS 100251 AZUGCHQAMRBA

Thank you:)
196086
196087

[dopsleutel13]

Hi:)

please activate,

AutoCom CARS 100251 OSIFKCIGBOCT
AutoCom TRUCKS 100251 AZUGCHQAMRBA

Thank you:)
196086
196087
Can you read ? The key is gone !
There is a new download , use it !:sleep:

[obdrs]

Can you read ? The key is gone !
There is a new download , use it !:sleep:

Activation for serial 30222 goes like charm, but is there any solution for interfaces with serials that are blacklisted ? like 100251 ?

[gazvts]

That famous cdp+ serial it either updates firmware or it doesn't update it's a chance you take

[mecdoc]

Please activate Delphi Cars 2013.1
thank
....................................

[dopsleutel13]

Activation for serial 30222 goes like charm, but is there any solution for interfaces with serials that are blacklisted ? like 100251 ?
I think (not tested yet) that most Blocked ID numbers are deleted in the patch .
If it is blocked then it's given a message before Flashing.

Update i saw just that someone installed with 100251 and worked wel on Autcm

[gazvts]

will tell you now in 2 mins if the famous + serial works

UPDATE: working good :) on the cdp+ but i already had 1310 fw update that might be still the issue on some

[obdrs]

will tell you now in 2 mins if the famous + serial works

UPDATE: working good :)


NICE !

can you tel us for DELPHI , HW ID for serial 100251 and other serials, if you have it :biggrin:

[gazvts]

NICE !

can you tel us for DELPHI , HW ID for serial 100251 and other serials, if you have it :biggrin:is it these you want ?

[obdrs]

Awesome ! It works like charm ! :congrats:

[maitresox]

hi,
Can you activate this file ? cdp+ 100251 autocom 2013
Thank
196188

[gazvts]

hi,
Can you activate this file ? cdp+ 100251 autocom 2013
Thank
196188


READ first 1st post updated D.I.Y

good luck!

[genaf1111]

Hi! Activate please me delphi 2013 cars and trucks s/n 30251196202196203

[maitresox]

Sorry M8
it's posted
Thanks

[genaf1111]

Thanks! All works!

[dstrr]

Thank You. Is there a hardware key generator available?

[Amilo35]

Hello! pls activation.
thanks

[vdgle]

Since your first msg that describes the procedure where you say that no xml is needed everyone's asking for an xml. Could you please explain to me which is valid? My autocom is cod+ China clone

[dopsleutel13]

Since your first msg that describes the procedure where you say that no xml is needed everyone's asking for an xml. Could you please explain to me which is valid? My autocom is cod+ China clone
Hi vdgle , Its comes that the people not reading the first post !
Clear now ?
:welcoming:

[dopsleutel13]

Thank You.
Extra info : extra info (https://www.rapidshare.com/files/423487297/info.rar)
psw=digital-kaos

[kevfield]

Can anyone activate this for me please

[leboncoindu94]

196459HI PLEASE

ACTIVATION

R1.2013

OLD VCI SN 98765

THANKS A LOT

[egomaniac12]

Big thanks to dopsleutel13 (http://www.digital-kaos.co.uk/forums/members/71649-dopsleutel13/) and gazvts (http://www.digital-kaos.co.uk/forums/members/352285-gazvts/). Solution that you shared works very well. You made my day gentlemen :welcoming: :congrats: Thanks again!!!

[serg2000]

Hello! pls activation.
thanks

[gazvts]

@ egomaniac12
we only shared the link not our solution please edit your post

thanks!!

and the rest of you guys here
i deleted the patch you used as i aint sure if its faulty or S/W bug
as some options in sw don't work 100%

[lucky-zg]

hello...can i get activation...
THANKS
autocom cdp
all in rar

[gazvts]

hello...can i get activation...
THANKS
autocom cdp
all in rar
here you are

please no more posting up XML files this was the last one in this thread

[vdgle]

I have to say thank you to dopsleutel13 for his very helpful distribution of the patch. It works perfectly without any need of xml activation. And something for all the other members, don't ask for xml file, it doesn't need it.

[jossef]

please activation car cdp+ and truckcdp+
sn 100251
thanks you friends



196625196626

[miks2]

Please activate Autocom Cars 2013.1 , thanks very much in advance....

[gazvts]

please no more posting up XML files this was the last one in this thread


please activation car cdp+ and truckcdp+
sn 100251
thanks you friends






Please activate Autocom Cars 2013.1 , thanks very much in advance....
:hopelessness: Guys please no more try an help yourselves >> 1st POST
thanks !!

[dopsleutel13]

Klik and read 1e post (http://www.digital-kaos.co.uk/forums/f154/delphi-aut-c-m-2013-r1-activation-332948/)
Thanks ...

[oem]

Please for activation 2013.1

[kevfield]

Iv tryed again with out the need of xml file but dont seem to work could someone do this one for me please .....

Thanks kev

[dom8]

Hello help with my activation. Serial 100251 cars and trucks 196735

[gazvts]

Kev try searching for older versions and delete them >>

Command Prompt, it is under c:\Documents and Settings\<your_username_here>\AppData\Roaming

[assitutto]

this patch don't work for me, win7 32bit in my laptop

[turbocip]

Maybe someone post keygenactivate for xml file ...

[gazvts]

this patch don't work for me, win7 32bit in my laptop
try %appdata% roaming 123__car ........

[ptalev]

Help please.Delphi 2013.1 not activate.I delete folder ............ \AppData and patch dont work s/n 60606

[Paullv]

For those who do not even start with the patch version 2013.1, you must do the following:
Win XP.
1. Uninstall the version 2012.3
2. Delete the folder
Documents and Settings \ User ***** \ Application Data \ autocom
3. Delete the folder
Documents and Settings \ User ***** \ Application Data \ Microsoft \ SystemCertificates \ My
4. Install version 2013.1
5. Copy the patch to the installation directory avtokoma.

All start and rejoice with the patch program is activated, even without an Internet.

[diky]

Hi, Big thanks to Paullv .very clear instruction which work , how you worked it out
is beyond me , I was trying for ages .Just about to smash the laptop to to bits.

Regards diky.

[ptalev]

Thank you Paullv.All is ok and work

[assitutto]

paullv metode still not work in my win7 32bit

[maxxx]

please activation car cdp+197180197180

[dopsleutel13]

paullv metode still not work in my win7 32bit

For the simply reason Sir you NOT erase/delete your Autocom or Delphi folders (Windows XP) from your:


C:\Documents and Settings\All Users\Application Data\
C:\Documents and Settings\Your Account\Application Data\


About Windows 7, i suppose you know where is the related upper folders..
here..
C:\users\All Users\Application Data\Delpi or Autocom
C:\users\Your Account\Application Data\Delpi or Autocom


:welcoming: Or ! Create another user account in windows and activate it within the new account.

[roquete]

Finaly working, in adition to those folders there is also another witch i didnt erase, found on another forum.

XP:
C:\Documents and Settings\Default User\Application Data\Microsoft\SystemCertificates\My
C:\Documents and Settings\LocalService\Application Data\Microsoft\SystemCertificates\My
C:\Documents and Settings\NetworkService\Application Data\Microsoft\SystemCertificates\My

Win7
C:\users\**USER**\AppData\Roaming\Microsoft\System Certificates\My

Reboot then install 2013.1
Patch, insert hwkey then activate
dont forget to rename WyUpdate.exe in autocom or delphi folder

[Yura000]

please activation car cdp

[Nitro82]

Hello, I'm looking for the keygen for 2013.1 Autocom, serial number 100251 and HK OUQFPFEBUHBK, somebody can help me, thank you very much, best regards from Spain

[Tjur]

Hello, guys!
Need activation for Autocom 2012.3

a-710-142
serial number; 100251
HW key; OPCSPRBDMRMQ

[gazvts]

Try here >> http://www.digital-kaos.co.uk/forums/f154/delphi-12-3-autocom-12-3-all-you-need-activate-327738/

[dj_piex]

it's possible a second activation 4 my new pc?

Thx!

[darkman30]

Please activate my xml, SN: 100251, WLUQXOZJZCKP

[darkthrone]

Big thanks to all.With the instruction from the first post is working,autocom is activated.
I'll try to use it with a 30250 HW id clone.First I'll try to make the firmware update and come back with feedback

[leboncoindu94]

PLEASE ACTIVE MY FILE
DELPHI
OLD VCI SN: 98765
DIESEL MAX

THANKS A LOT
197802

[assitutto]

For the simply reason Sir you NOT erase/delete your Autocom or Delphi folders (Windows XP) from your:


C:\Documents and Settings\All Users\Application Data\
C:\Documents and Settings\Your Account\Application Data\


About Windows 7, i suppose you know where is the related upper folders..
here..
C:\users\All Users\Application Data\Delpi or Autocom
C:\users\Your Account\Application Data\Delpi or Autocom


:welcoming: Or ! Create another user account in windows and activate it within the new account.

the simply reason is another...i have to erase this line from hosts file in windows\system32\drivers\etc
127.0.0.1 activation.autocom.se
127.0.0.1 activation2.autocom.se
127.0.0.1 updates.autocom.se

now all work good

[ruffles1986]

Hello need activation for autocom CDP+ 2013.1 serial: 100251 hw:OSIFKCIGBOCT

Thanks in advance

[josepe 22]

please where do autocom 2.13.1 release?, thanks not delphi

[gazvts]

1st post 1st link in the txt full iso no password needed

[dopsleutel13]

the simply reason is another...i have to erase this line from hosts file in windows\system32\drivers\etc
127.0.0.1 activation.autocom.se
127.0.0.1 activation2.autocom.se
127.0.0.1 updates.autocom.se

now all work good
Then it's workin good but closed in 3 seconds !
you did/get the HOST file blocking adresses not from this forum friend !
Fine that your problem is solved and everything is working .:congrats:

[prodlt]

Hi thank's a lot. working with my autocom 100251. Good job.

[STK340]

DO IT YOURSELF
thanks debutant :beer:

1.turn your internet off including A/V + firewall
2.install preferred S/W either RED or BLUE
3.run patch in to each hardware folder ie. cars or trucks
4.continue with setup as normal no xml needed

thanks goes to dopsleutel13 for sharing the link:beerglass::beerglass::beerglass:


first thank's for sharing with us your work,
i make upgrade and everything is ok but i see on man truck is missing ecam on tga 2002,
in previous version it was,
i checked both autocom and delphi mybe the patch is problem or missing from soft developer,
please tell me if you have answer,
regards

[gazvts]

first thank's for sharing with us your work,
i make upgrade and everything is ok but i see on man truck is missing ecam on tga 2002,
in previous version it was,
i checked both autocom and delphi mybe the patch is problem or missing from soft developer,
please tell me if you have answer,
regards
It's Missing from the software mate

[dj_piex]

;) it's possible one activation?

sorry, i have read now the first post..... :)

[70max]

Hello Friends,
in my PC with Vista OS can not run
2013R1, Delphi and does not go Autocom gives me the same error.


OPERATION FAILED


I did all the tests described in the post, but nothing


Please help me.


Thanks in advance for the answers

[gazvts]

what error is it giving ?
have you all the net frameworks 3,3.5
vista isnt a great os anyway

[70max]

what error is it giving ?
have you all the net frameworks 3,3.5
vista isnt a great os anyway

Hello


Thanks for the reply
I have already installed the 2012 version relase 3 is working properly
I tried both Delphi and autocom and I have the same error


I send you photos error message
199085

[gazvts]

did you try running the patch as admin

[70max]

Yes, I tried to run as admin
But I have always the same problem


I do not know what to do to make it work

[gazvts]

don't be in a panic over it you ain't missing anything

[maxxx]

it's possible one activation?
Cars/ 100251/ OSIFKCIGBOCT
Trucks/ 100251/ AZUGCHQAMRBA

[duckman]

thanks everyone for your help got it working great,couldnt get past need internet connection needed. didnt realise i needed to plug it into the car !! :congrats:

[bahlawi]

hi i need activation for Delphi 12.3 cars
serial : 20418
HW car : IDAYFBSNBTJC
thanks

[heteromies]

hi i need activation for Delphi 12.3 cars
serial : 20418
HW car : IDAYFBSNBTJC
thanks

Here mate ^^

[saadane]

Thanks gazvts!!

[bahlawi]

hi i need activation for Delphi 12.3 cars
serial : 20418
HW car : IDAYFBSNBTJC
thanks

[gazvts]

Count back 3 posts chap all you need is in the link

[byati]

2012.3 laptop, using the earlier version. set up a new pc to pc activation of the moment when I made ***8203;***8203;a change in the full open while closing. "new update available" sign before closing. I'm starting and opening up the desktop computer. What do you think could be the problem?


thanks

[bersch8688]

hi i need activation for Delphi 12.3 cars
serial : 20418
HW car : IDAYFBSNBTJC
thanks http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Files

http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/rar.gif FileActivation.xmlg.rar (http://www.digital-kaos.co.uk/forums/attachments/f154/199388d1369079331-delphi-12-3-autocom-12-3-activation-fileactivation.xmlg.rar) (58.5 KB, 0 views)






You must Patch installation

[gazvts]

2012.3 laptop, using the earlier version. set up a new pc to pc activation of the moment when I made ***8203;***8203;a change in the full open while closing. "new update available" sign before closing. I'm starting and opening up the desktop computer. What do you think could be the problem?


thanksif you are talking about when your online software telling there is an update >>> 2012.3.2 you will also have to update firmware to

if you don't want these updates go to local disk C: program folder then autocom/delphi /cdp,cdp+,ds150,ds150e (new vci) look for file wyUpdate rename to wyUpdate1
and it will stop looking for updates

[n0f3ar]

please activation needed
thank you

[tecnoracing]

it's possible one activation? thanks (Car) serial 30250

SQKQQCTJXELA

[gazvts]

it's possible one activation? thanks (Car) serial 30250

SQKQQCTJXELA
:eeek: what ever way you installed an run that patch is not right
i suggest you try first post only use the patch provided and read the how to delete the certificates before install not after
so delete everything do fresh install use only 1 patch

[filoxio77]

Hello, could you activate my xml. CDP+ cars
thanks very much in advance.

pleaseeeee



199973

[bahlawi]

hi i need activation for Delphi 12.3 cars
serial : 20418
HW car : IDAYFBSNBTJC
thanks

[gazvts]

you have an error with rar file can't open

[dopsleutel13]

hi i need activation for Delphi 12.3 carsserial : 20418HW car : IDAYFBSNBTJCthanksHi Bahlawi, your request to activate your Delphi can not be honored because you still use the original main.exe!Here is everything you need >> http://www.digital-kaos.co.uk/forums/f152/autocom-3-2012-here-all-what-you-need-317476/

[atomiczen]

please read the first page, there's no need to post your xml file

[atomiczen]

I have 100250 serial blacklisted, installation was ok, patch ok, soft ask me for a firmware upgrade, made ok, but now when i start the software it tell me that i have a 100250 blacklisted serial, and don't connect with the car.
how i can change the serial of my clone?

[dopsleutel13]

I have 100250 serial blacklisted, installation was ok, patch ok, soft ask me for a firmware upgrade, made ok, but now when i start the software it tell me that i have a 100250 blacklisted serial, and don't connect with the car.
how i can change the serial of my clone?
Copy 2013 firmware in the Autocom / delphi 2012-3 firmware folder and updat tester , then you can use 2013-1

[atomiczen]

Copy 2013 firmware in the Autocom / delphi 2012-3 firmware folder and updat tester , then you can use 2013-1

thanks for your fast reply, i'll post result in some minutes

[atomiczen]

Copy 2013 firmware in the Autocom / delphi 2012-3 firmware folder and updat tester , then you can use 2013-1
i copied this in 2013.1 folder, upgraded firmware, but nothing is changed.
program start, but when i try to connect "vci serial is 100250"
how to change serial?

[gazvts]

i copied this in 2013.1 folder, upgraded firmware, but nothing is changed.
program start, but when i try to connect "vci serial is 100250"
how to change serial?
You can't change the serial yet unless you do the following :
need a debugger/programmer to read the stm32 mcu and flash memory then buy new stm32f205 mcu reprogram it an change the serial

did you try fresh install of the software delete your host files again?
Try it then report back

You can still use the 1310 firmware on the 12.3.2 software

[Zmann]

i copied this in 2013.1 folder, upgraded firmware, but nothing is changed.
program start, but when i try to connect "vci serial is 100250"
how to change serial?

not 100251? and was it this sn since the beginning?

[gazvts]

not 100251? and was it this sn since the beginning?
Lol I never even caught on that one thought it was typing error

[atomiczen]

Lol I never even caught on that one thought it was typing error
you are right, was i typing error when i activate my tester, i type 100250 instead 100251
now it's all ok

i have read in other forums that this version 2013.1 is unstable a lot, 2012.3 it's a lot better
have you some feedback about?

[gazvts]

2012.3.2 works 100%
for 2013 it has some issues with modules abs,engine

[atomiczen]

2012.3.2 works 100%
for 2013 it has some issues with modules abs,engine
so why use it instead more stable 2012.3?

[gazvts]

I don't use it i have reverted back to 2012.3.2

[atomiczen]

I don't use it i have reverted back to 2012.3.2
how it's possible to go to 2013.1 to 2012.3?
disinstall all with the guide and then install the older version, but with the firmware? could i use the 2012.3 soft with 2013.1 firmware? it's possible to flash an older firmware?

[gazvts]

Yes its possible or you can flash firmware via jtag

[solidol]

please activation needed
thank you
Car sn 30250
Hardware key: SQKQQCTJXELA

[gazvts]

please activation needed
thank you
Car sn 30250
Hardware key: SQKQQCTJXELA
did you try using patch/activator first post ??

[solidol]

Yes of course I spent a patch with the first post but unfortunately the program does not see the cable. Throws an error VCI.
Tell me what you can do so Draft program saw the cable?

[gazvts]

Yes of course I spent a patch with the first post but unfortunately the program does not see the cable. Throws an error VCI.
Tell me what you can do so Draft program saw the cable?
are you a new user to Autocom ?

try chancing your serial using realterm serial changer or tool.exe which a link was provided a few pages back
to a different 5 digit S/N

[apv]

Automiczen Hi, I have installed on the same portable autocom delphi 2012.3 and 2013.1 both with the serial 100251. had the 1230 firmware and I upgraded to fimware 1310, I tried both softwares on a Citroen C5 and I have not had any problems.

[vionet]

HI, please activate my Delphi 2012 Rel 3 SN 100251, HW ID WLUQXOZJZCKP, Thanks.

[dopsleutel13]

HI, please activate my Delphi 2012 Rel 3 SN 100251, HW ID WLUQXOZJZCKP, Thanks.
Here you are ..Good Luck

[darkman30]

Please aslo activate my delphi SN: 100251, ID: WLUQXOZJZCKP
Thank you.

[gazvts]

Please aslo activate my delphi SN: 100251, ID: WLUQXOZJZCKP
Thank you.here you are !!

[darkman30]

Thanks a million!

[ouragh]

plz activation Autocom CDP+
--------------------------------------
ID Cars : a-710-142
cle : OPCSPRBDMRMQ
n serie : 100251

[heteromies]

plz activation Autocom CDP+
--------------------------------------
ID Cars : a-710-142
cle : OPCSPRBDMRMQ
n serie : 100251

No. After patching take activation.xml -file and send with those infos here. Then we can activate your file and then you can restore it to your pc.

[paulicappc]

please activation for AUTOCOM 2013.1 cars and trucks! 100 251 and serial key for proper OSIFKCIGBOCT AZUGCHQAMRBA for cars and trucks. Thank you!

[bersch8688]

Please activation my File

30250
KJRRWWJOAROS
202941

Thank you

[gazvts]

first post updated please read it carefully patches don't work 100% after update so i suggest you modify your wyUpdate file untill fixed

[genius76]

Please activation needed
Thank

[sezeryaz]

Sorry Is there a way to download Delphi 2012 R3 ? Because if i download it from the original page its 2013 R1 I can not download it there..

[sezeryaz]

dont work on 2013 r1 DELPHI DS150E it wants serial number and HW number

[gazvts]

guys when you install 2012.3 edit/rename the wyUpdate file new update 2012.3.3 patches aren't working

[paro44]

Sorry Is there a way to download Delphi 2012 R3 ? Because if i download it from the original page its 2013 R1 I can not download it there..

Scroll down the original page to "previous versions", there you find it.

[dopsleutel13]

dont work on 2013 r1 DELPHI DS150E it wants serial number and HW number
And why do'nt you fill it in ? fill in and go on activate the software (internet off of course and yes you can read ):giveup:

[say882]

this go with CDP+?

[piscinarasx]

please 207879

[dopsleutel13]

please 207879
Hi friend:pepsi:, Read first post (its do it yourself):top:

[70max]

Please let me who
by activation autocom 2013 r1


thanks max

[dopsleutel13]

Please let me who
by activation autocom 2013 r1


thanks max
Hi friend:pepsi:, Read first post (its do it yourself):top: Succes Max

[70max]

Hi friend:pepsi:, Read first post (its do it yourself):top: Succes Max

Thanks for the reply but I can not do activation
and I can not download the torrent file,


I can tell you I do not understand how to do


thanks

[gazvts]

new text file with link added

[dopsleutel13]

Thanks for the reply but I can not do activation
and I can not download the torrent file,


I can tell you I do not understand how to do


thanks
All you have to do is read the text file ,download use the file you just get from the textfile put files in your install map and start it up and klik klik klik ..(internet off)
and because you have installed everything no torrent needed ,Simple :pepsi:

[securipro38]

Hi can you make me new file activation
SERIAL: 30258
HK: UUJXUTIZZXXX
Thanks a lot

[dopsleutel13]

Hi can you make me new file activation
SERIAL: 30258
HK: UUJXUTIZZXXX
Thanks a lot Hello Securipto38 You are from Everywhere but can not read ?
All you have to do is read the text file in first post ,download use the file you just get from the textfile put files in your install map and start it up and klik klik klik ..(internet off)
and because you have installed everything only patch needed ,Simple :pepsi:

[Dennis-]

Hello all.
I had follow the instructions and try to activate 2012.3, BUT it says "cant connect to server"...someone here know whats wrong ?

Regards
Dennis

[dopsleutel13]

Hello all.
I had follow the instructions and try to activate 2012.3, BUT it says "cant connect to server"...someone here know whats wrong ?

Regards
Dennis
Replace Main.exe with the patched files (internet cable disconnected) and try again !:top:

[Dennis-]

Thank you, but i tried everything and still same error.

BUT is there a way to change the serial nr, it must be a 6 digit number and the serial changer i got, handle only 5 digits.

Regards
Dennis

[dopsleutel13]

Thank you, but i tried everything and still same error.

BUT is there a way to change the serial nr, it must be a 6 digit number and the serial changer i got, handle only 5 digits.

Regards
Dennis
If you have 6 digits then you have CDP+ and cannot change the serial number :banghead:
Only CDP pro has 5 digits and you can change ...
but the blocked serial is gone in the patch because everybody can work with this patched software .. for so far i know .

[Dennis-]

Hello again and thank you once more..

Can the problem be that i had installed before autocom 2011.3 ?

Coz i have no problem install that old sw....maybe some old reg files or something messing up things ?

Regards
Dennis

[Dennis-]

I have 2013 R3 that i want to install, and i want to install it on a CDP PRO ( 5digits )...is it possible ?

Regards
Dennis

[gazvts]

Yes its possible just need to install revo uninstaller to uninstall everything Autocom
then %appdata% Roaming delete Autocom folder there to
Start menu type CMD in command prompt window type certmgr.msc delete the autocom certificate from personal certificates
Make sure your windows net frameworks up to date

[dopsleutel13]

I have 2013 R3 that i want to install, and i want to install it on a CDP PRO ( 5digits )...is it possible ?

Regards
Dennis
OK , dennis I have 2013.2.1 on the pro and i confirm it works perfect .Even parameters are reading good (someone said it's not reading sensor parameter)
if you have Delphi red one or Autocom Blue one 2013.3 !!?? then i tink it's fake .:pepsi: or meaning 2012.3 to install?:cheers:
regard Dop

[arvedo]

hello good afternoon friends which is the number of items to install delphi.
may be the same for autocom????

[dopsleutel13]

hello good afternoon friends which is the number of items to install delphi.
may be the same for autocom????
Hi arvedo, if you install delphi then the hardware key is different from Autocom .
:pepsi:

[piscinarasx]

when you think that will come out 'autocom R2-2013.

[dopsleutel13]

when you think that will come out 'autocom R2-2013.
If someone upload it then we can try it.(someone say it is in the market)
Be patient it will come soon.:pepsi:

[selim]

Hy guys. I need help! So I did everything as the manual says, deleted autocom with revo, all the folders and certificat. I used a-710-479 as well as 100251 and I generated HW for Autocom. Install was clean and nice. But I have a problem with VCI, it says wrong serial number. It's wierd because firmware update went succeseful. And also the serial number which is showed is 30250! So please can someone help me out ?
Thanks

[gazvts]

delete software re-install new product ID >>> CDP+ (new vci 100251) : a-710-142

[roquete]

hi, could not find any other thread, if someone can activate this file for me for 2013.2 delphi, need it badly just because of reseting clutch of smart 450
Serial:20148
hw key: DVHGUYBQISKJ
version 2013.2
tanks in advance
210461

[Qrius]

If you need it really badly to reset a smart 450 clutch as you stated ,
and you could not find any thread of the latest version it's activation
Why not simply install any older version of where there are multiple threads that could help you ?

[roquete]

Because 2013.1 cant do it on smart 450

Sent from my GT-I9300 using Tapatalk 2

[gazvts]

Because 2013.1 cant do it on smart 450

Sent from my GT-I9300 using Tapatalk 2correct only 2013.2 can do it
not sure if anyone has activator for your xml file on here yet ;)

[zeljolaki]

hi, could not find any other thread, if someone can activate this file for me for 2013.2 delphi, need it badly just because of reseting clutch of smart 450
Serial:20148
hw key: DVHGUYBQISKJ
version 2013.2
tanks in advance
210461
Here is all that you need ...

[gazvts]

Here is all that you need ...
Can you help with activation ?

[josepe 22]

hello, someone has torrent link for autocom 2013.2 thanks

[m3evo]

hello, someone has torrent link for autocom 2013.2 thanks

No Autocom, just Delphi. You will just have to get to like red.

[BITZU]

hello,can you help me with this file .thanks a lot and have a nice evening.

[gazvts]

hello,can you help me with this file .thanks a lot and have a nice evening.enjoy! :top:

[dopsleutel13]

hello,can you help me with this file .thanks a lot and have a nice evening.

hello Bitzu please reed first post and you understand why ! nice evening too :top:

[BITZU]

Tanks a lot,work like a charm. nice evening too.

[DiagService]

Hi I need Help with Activation

Delphi 2013.2
Serial 30250
HWK FEZJSOAOLFZP

Its this good S/N and HWK for update Clone Hardware with software 2012.3 to update with 2013.2 software

thanks

[dipdop]

Hi I need Help with Activation

Delphi 2013.2
Serial 30250
HWK FEZJSOAOLFZP

Its this good S/N and HWK for update Clone Hardware with software 2012.3 to update with 2013.2 software

thanks

DiagService here is activated file.212261

[piscinarasx]

Update 2013.1.1Verified with the activation patch !Tested on Win XP 32bit and Win 7 64bit.1. Copy your files DTC.acz and OBD.acz from the directory data.2. Upgrade to version 2013.1.13. Replace after an update to the previously saved files (DTC.acz and OBD.ac).4. Replace the files from the archive into the main directory Autocom.5. Use.

[gazvts]

thats not a update if you are using the old 2013.1 files DTC.acz,OBD.acz ........... thats just for unlock software to work again
now you know why miss delphi and autocom have new release 2013.2

[eduardo74]

Please activation cars

[gazvts]

Please activation carsenjoy! :top:

[eduardo74]

please for trucks

[gazvts]

please for truckshere you are enjoy!:top:

[marsete]

Thanks friend,fantastic soft!!Regards

[mesrine_29]

Hello,

So, I suggest you activate your software with a version of Aut@c@m/DelPhi 2013.2 and update 1 without internet connection problem and updates OK.


Attached is the patch to slip into the back of autocom/DelPhi installation and thank you for giving me your "FileActivation.xml" file so that I will return validated.


//\\Aut@c@m 2013.2.1 and Update 2 Download + HWKey + Patch//\\


https://mega.co.nz/#F!5Z4RCSiY!IKkawVt6AgcqGoi7UGy50g



Aut@c@m/delphi (http://europe.delphi-dso.com/downloads/private/car%20diagnostic/PC/CurrentVersion/DSCars_HeavyDuty.zip) (Here) setup


-----AUTOCOM-----

a-710-142 = cdp+ (ds150e new vci) cars
a-710-210 = cdp+ (ds150e new vci) trucks

a-710-479 = cdp (ds150e) cars
a-710-254 = cdp (ds150e) trucks




-----ECLIPSE EDIS-----

e-212-142 = cdp+ (ds150e new vci) cars
e-212-210 = cdp+ (ds150e new vci) trucks

e-212-479 = cdp (ds150e) cars
e-212-254 = cdp (ds150e) trucks



-----OPUS-----

o-409-142 = cdp+ (ds150e new vci) cars
o-409-210 = cdp+ (ds150e new vci) trucks


o-409-479 = cdp (ds150e) cars
o-409-254 = cdp (ds150e) trucks



-----MekoDiagnostic-----

m-025-142 = cdp+ (ds150e new vci) cars
m-025-210 = cdp+ (ds150e new vci) trucks

m-025-479 = cdp (ds150e) cars
m-025-254 = cdp (ds150e) trucks




-----Motorscan Truckpro 5840-----

m-461-210 = cdp+ (ds150e new vci) trucks



-----e-Diagnos-----DEMO By Autocom----

s-008-479 = cdp (ds150e) cars
s-008-254 = cdp (ds150e) trucks



delphi 2013.2 (update1+2) from Here (http://rapidshare.com/files/2649267709/update%201%2B2.rar)

Example

If:
your interface CDP+ 100251 SERIAL HWID Key and Id:


a-710-210 = cdp+ (ds150e new vci) trucK

hwid: YANIYNEHZLFZ(Autocom)
hwid: HYSOGTLPCOVA(Delphi)

IF:

your interface CDP 30250 SERIAL HWID Key and Id:


a-710-254 = cdp (ds150e) trucK

hwid: QMMSZBLABIEF (Autocom)
hwid: UFYWXWTCVUXG (Delphi)

After first installation, Patch folder installation with a patch in the first thread.
After generate "FileActivation.xml" and give me for activated.

Edit:No extract archive, burn or mounted with "UltraIso' or Daemon Tools"

1- Installation
2- Drag and drop Update 2 not use update 1
3- Patch with "main" file
4- Save "FileActivation"
5- Give the file


Have fun

#A little thank you for our work on the forum

During installation generate Electronic key with this app:

[70max]

Hello friend,


Where can I find autocom program, I see only delphi
Thank you for your answer


Best Regards Max

[dopsleutel13]

Hello friend,


Where can I find autocom program, I see only delphi
Thank you for your answer


Best Regards MaxAt this moment there is only the red software (and it's workin good)
So you have to like the RED one or wait for the blue Car.:pepsi: :top:

[mesrine_29]

Right, this time the red friendlier to come blue.
Sorry for my English medium :blue:

[kidloco]

Hello ... please can you tell me what is new with this activation i have CDP+autocom Cars/trucks 2013.1..what is diference between 2013.1 & 2013.2.. THX...

[mesrine_29]

Here are the new in Delphi (same as the Aut@c@m) 2013.2.

213129

[josepe 22]

Hello,

So, I suggest you activate your software with a version of Aut@c@m/DelPhi 2013.2 and update 1 without internet connection problem and updates OK.


Attached is the patch to slip into the back of autocom/DelPhi installation and thank you for giving me your "FileActivation.xml" file so that I will return validated.


autoc@m/delphi (http://europe.delphi-dso.com/downloads/private/car%20diagnostic/PC/CurrentVersion/DSCars_HeavyDuty.zip) (Here) setup


product id for aut@c@m(delphi):
a-710-479 = cdp (ds150e) cars
a-710-254 = cdp (ds150e) trucks

a-710-621 = adp186 (AMT) trucks
a-710-913 = adp186 (AMT) cars

a-710-142 = cdp+ (ds150e new vci) cars
a-710-210 = cdp+ (ds150e new vci) trucks

a-710-178 = sdp cars
a-710-343 = sdp trucks


!!! after install, apply update1, to install folder


!!! Before generating fileactivation.xml , copy Main.exe from the folder "patch installation" to install folder


delphi 2013.2.1 (update1) from here (https://www.dropbox.com/s/cgn7yzd4ld8vauu/update1.rar)

Patched your installation with:


https://mega.co.nz/#!EYB0nQLQ!U0a0uCftb4O0_JbT3cYLHUtCmTVQKqT1shop9bR oqgQGive me your file =)>"FileActivation"

Have fun




hello, how or where you apply the update 1, does not exe?. thanks

[dopsleutel13]

hello, how or where you apply the update 1, does not exe?. thanks
You have to copy all files and maps in the installed Delphi-program-folder :listen: and after that replace Main.exe and after that (Give me your file =)>"FileActivation") as brainconceptor said
:pepsi:

[josepe 22]

hello, 100251, fsbqqjwhdcwa, cdp+, 213184

[mesrine_29]

Hello Activated,
213272

[josepe 22]

hello,thanks working ok.

[dopsleutel13]

hello,thanks working ok.
Its better to say thanks by clicking on the Thanks button in post from brainconceptor (http://www.digital-kaos.co.uk/forums/members/373493-brainconceptor/)

:pepsi:

[petrica_velvet]

213600thanks man, this is my file ,can you activate please

[mesrine_29]

Hi petrica_velvet,

Activated

[miks2]

Hi!

Please! activate.

[floridadrap]

if any intrested for activation for autocom/delphi 2013.2 just pm for information

[mesrine_29]

Hi,
Activated :joyous:

[miks2]

works great, thank you....

[brodaty]

Hi!
Please! activate.delphi

[marmaro]

Hi!
Please! activate.delphi:smile:

[mesrine_29]

Hi!
Please! activate.delphi



Hi!
Please! activate.delphi
Hi,
Have you patched the installation folder first???.

[brodaty]

patched installation folder

[mesrine_29]

don't not open "DelPhi" patched with this file



https://mega.co.nz/#!EYB0nQLQ!U0a0uCftb4O0_JbT3cYLHUtCmTVQKqT1shop9bR oqgQ

in the "DS150E" folder or "DS150E (new VCI)" .


give me your serial interface CDP +.
if it is 100251, the Electronic HWID key is:
FSBQQJWHDCWA for Delphi

You must uninstall Delphi all user folder and clean up your registry before reinstalling.
Because the certificate is not valid in your installation folder.

[marmaro]

I added a patch from your link. ,can try it now213986
sorry I ha:grey:ve old file in the same location

[josepe 22]

hello, my problem is that I can not update delphi vci cdp 2.13.2, is enabled and test ok but da problem actualizar.gracias

[miba]

Good work man

[smirnoff_rules]

l was havin little problems with delphi 2013r1 , 2 and 3 so l just reinstall cdp as ds100e instead of 150e and seems ok now ? anyone know wot the difference is ? cheer s

[mesrine_29]

Hi marmaro,
Activated

[mesrine_29]

Hi miba,
Activated

[marmaro]

Hi marmaro,
Activated


HI thanks.Application is started. I have one request, each new version I'm testing on the desktop in order to avoid problems with your laptop, if I boot the install on a laptop. Please activate my laptop versions214211

[mesrine_29]

Hi,
Activated.

[marmaro]

Thanks in advance. goog job!:joyous::top:

[sabian]

Hi my friend could you please activate my delphi? thank you!!!

[ISABINO]

please friend i need activation 214261 thanx

[miks2]

Hi,please activate my autocom...

[mesrine_29]

Hi my friend could you please activate my delphi? thank you!!!


please friend i need activation thanx


Hi,please activate my autocom...

Hi,
Activated good installation.:joyous:

[sabian]

Thank you !!! you are magnific!!!

[borbelyzoli]

Hi.
Help me with activate my file please

[domel45]

Hi,please activate my autocom ...
214416
214417

[mesrine_29]

Hi.
Help me with activate my file please


Hi,please activate my autocom ...


Hi,
Activated :joyous:

[borbelyzoli]

Working ok. Thanks

[dj_piex]

hi mate, it's possible to ctivate my 3013.2 ?
here car + truck xml ....

thx!

[rizor]

214567Hello,

can you activate my 2013.2 autocom ?

already thanks

[Henri bacardi]

Hello,Please activate my autocom. Thanks in advance!

[mesrine_29]

Hello,Please activate my autocom. Thanks in advance!


hi mate, it's possible to ctivate my 3013.2 ?
here car + truck xml ....

thx!
Hi,
Please read a first post.
Patch your installation folder first.

@rizor your file "activated"

[autocargo]

Hello. Can you please activate my delphi 2013.2? Thank you.
Regards.

[andy99]

Hello
Please activate my autocom.

[mesrine_29]

Hello. Can you please activate my delphi 2013.2? Thank you.
Regards.

Please patch your installation folder first.

@andy99
Your file "activated"

[autocargo]

Wonder if I got it right this time...

[sabian]

Here is my delphi xml,and i give you a big thank you!!!!

[jo?o antonio]

H? *,SMIRNNOFF_RULES

I HAVE A VCI AUTOCOM CDP+ S/N 100251 , INSTALLED DELPHI 2013-R2 + UPDATE, ACTIVATION SUCCESSFULY, BUT NOT WORKS, FIRMWARE PASS TEST OK FW1320, COMMUNICATION IS OK, LEDS GREEN BLINKING, BUT NO READ LIVE DATA , NO DTCs.

waiting for an solution.

[dopsleutel13]

Hi brainconceptor can you please activate the xml
thanks in advance .. Sorry already done by Files to activate helmet on lucky-seller@mail.ru with the theme "Enabling Autocom or Delphi - version"
20 minutes and workin .:top:

[piscinarasx]

please help to activate, thanks214782

[mesrine_29]

Wonder if I got it right this time...


Here is my delphi xml,and i give you a big thank you!!!!


Hi brainconceptor can you please activate the xml
thanks in advance ..




please help to activate, thanks

Hi,
Activated :joyous:

If I continue, it will have to change my rank to "Donator" or "VIP" \o/

[dopsleutel13]

Hi,
Activated :joyous:

If I continue, it will have to change my rank to "Donator" or "VIP" \o/ Yes you are on the right way , and thanks must be in your tanks-button.:top:

[piscinarasx]

thank you very much

[mesrine_29]

Hi brainconceptor can you please activate the xml
thanks in advance .. Sorry already done by Files to activate helmet on lucky-seller@mail.ru with the theme "Enabling Autocom or Delphi - version"
20 minutes and workin .:top:

Ok, Activated with a patch (main) in the folder.
Good
Soon

FIRST POST UPDATE "Addition electronic key generator link"

[mesrine_29]

UPDATE FIRST POST

Tomorrow I put a link to Aut@c@m 2013.2.1