satlink ws6906 tuning problem

[josepheid503]

hello everyone,

I have a satlink ws-6906 i just did an upgrade for the software and after that the meter is not working anymore. the machine is booting and functional but the "lock" light is always on and when i try to scan a certain TP the quality and signal bars are both "0%".

The question is how can i reload the original firmware that was shipped with the satlink, or anyone have another solution for this problem? maybe its a tuner driver problem.




Thank you in advance

[shaunfree]

HI josepheid try here mate http://www.digital-kaos.co.uk/forums/f11/satlink-ws-6906-a-396430/ hope this helps cheers shaun

[josepheid503]

HI josepheid try here mate http://www.digital-kaos.co.uk/forums/f11/satlink-ws-6906-a-396430/ hope this helps cheers shaun

Thank you shaunfree for the great reply, but i did try this method before and did not help.

[josepheid503]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
246250


Best regards, J.E

[saidkaon]

Muchisimas Gracias josepheid503. The problem for my satlink ws-6906 is resolved with your firmware.

[pirata72]

ok. perfect. With you firnwere

[gulliver90]

Good Night.
Thank is the firmware + upgrade tool.
One information exsist the editor channel for Satlink 6906 ?

[2look4]

Hello
Can someone post a link for wich cable you use to uppgrade, cant find the cable you have to buy. Please help me!

[dick b]

its an rs232 to usb cable and should have been in the box,but I"v used one of these meters for about 5yrs now and never found the need to update it like that . Isimply use the menus to add sats,TPs,channels etc;Menu.scroll L/R til you find what you want to alter.

[dharyuza]

ok, everything went very well thank you. + firmware upgrade tool provided.

Sorry I can not speak english. But for the help of google translate I use it.
https://translate.google.com.my

[dharyuza]

I can finally also a blue screen for satlink
DjpboxSat 2013: Sat Link 6906 (http://www.djpboxsat2013.blogspot.com.br/search/label/Sat%20Link%206906)
https://sites.google.com/site/clubebox2014/satlink-6906/Upgrade%20Sat%20Link%206906%20Original_Djpboxsat20 13.rar?attredirects=0&d=1

[livehunt]

I can finally also a blue screen for satlink
DjpboxSat 2013: Sat Link 6906 (http://www.djpboxsat2013.blogspot.com.br/search/label/Sat%20Link%206906)
https://sites.google.com/site/clubebox2014/satlink-6906/Upgrade%20Sat%20Link%206906%20Original_Djpboxsat20 13.rar?attredirects=0&d=1
same prob blue lock still on and no signal

[livehunt]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
246250


Best regards, J.E

worked for me m re leafed
thanks

[smeestu]

worked for me m re leafed
thanks
hi all new to the group can you edit the tp's with this or is it just a firmare upgrade

[genzy01]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
246250


Best regards, J.E

same problem blue lock still on and no signal, please help

[genzy01]

same problem blue lock still on and no signal, please help



after using satlink ws-6906.zip (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=246250&d=1392725015) works again. thanks josepheid503

[rcleary99]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
246250


Best regards, J.E

Hi just downloaded zip done the upgrade worked brilliant for my blue lock led staying on
thanks a million

[avn]

thanks

in the djpbox sat there are new things like key set and blind scan

anybody try it?

[Technophobic]

thanks

in the djpbox sat there are new things like key set and blind scan

anybody try it?

Yes I have had it on my meter for about an hour. Afraid I cannot enlighten you further, I am trying to figure out how to get the menus to use the whole screen. At present it makes things quite difficult to see.

I think I might need a magnifying lens add on. :confusion:

[wba]

Hi dear,

i see you are handy with the firmware,
is there a way to get change the firmware so the Satlink will also check the normale TV signal here in Spain?
i have see it once by a handyman also changes some things, but i realy dont know what he has do with it.




For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
246250


Best regards, J.E

[triggerup]

I had exactly the same issue here, paid for an update from satlink themselves and my ws=6906 just had no signal, the blue lock light was permanently lit. I thought is was completely goosed. Your custom firmware has restored it back to working condition. Nice one josepheid503! :)

[peer1]

Please help me and me

Can not save the list of channels when you give the device resets.



I tried to do updates but I get this error.
burn flash error, error address:000000

SatLink6906

thank you.

424405

[ajam90]

hi Guy.. Anybody know how to solve my NEW ws-6906 the problem detection for TP 12500 v 43200 Ku Band FTA in Chinasat 11 bad low signal not locking compare with ws-6933 within 2-3 minit fast locking.. Is it problem SYSTEM of must Upgrade FIRMWARE..?

I need for Help.. TQ Guys

[sikonauta]

thanks. i solved the problem whit your firmware.

[hhamme]

I have same issue and would like to try to solve with this update, but when I try to get the software from link, I keep getting this error from the site: satlink ws-6906.zip (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=246250&d=1392725015)

Your submission could not be processed because a security token was invalid.

If this occurred unexpectedly, please inform the administrator (http://www.digital-kaos.co.uk/forums/sendmessage.php) and describe the action you performed before you received this error.

I have made posts so should have access to download I think.

Any suggestion?

/Harald

[tkifle]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
246250


Best regards, J.E


I can't download this... it's telling me to log in. I have already posted and should be able to download the attachments? Any ideas?