Fiesta 2013

[honingkoning]

Hello Guys,

What tool does a 2013 fiesta with MC9S12XEQ512 mask 3M25J.

By obd (smok) not worked digi says unknown version.
i also read on DK if CS not ok dash is dead and needs to go to dealer :-(

Who can share some info.

Wbr Adam.

[aposig]

What tool does a 2013 fiesta with MC9S12XEQ512 .....i think x prog original,and orange5 read thise mcu!!!!!!!!!

[Repinator]

upa can read this processor
Freescale (Motorola) HCS12XE*: MC9S12XEG128, MC9S12XET256, MC9S12XEQ384, MC9S12XEQ512, MC9S12XEP768, MC9S12XEP100

[honingkoning]

And what about calculation and cs.
Is it true that dash dies when wrong cs is in dash.

Maybe someone who did one before ?

Wbr Adam.

[vageric]

smelecom can do this!

[davecooper47]

I've done these with UPA no problem. Read emulated eeprom only and of course save, change data and program modified data only. Calculation is same as loads of other Fords and you will clearly see mileage. If you can't calculate use Tachosoft.

[Apolo29]

I did it too, with UPA all ok, no problems at all!

[skens]

hi
fiesta 2010

4.88DP3 PKW / LKW - FORD – FIESTA 2008- diag obd ok 2 min
regards

[honingkoning]

2010 is different dash, login is changed.
I tried all possible tools al say unknown version.

Wbr Adam.

[PremierD]

Just read the processor .. and post the dump .. its not rocket science mate

[captain crackers]

It is if you are a button pusher! Arthur.

[PremierD]

:eek: you mean we have BUTTON PUSHERS on here .. I'm shocked and astounded Arthur ...lol

[leowii]

And what about calculation and cs.
Is it true that dash dies when wrong cs is in dash.

Maybe someone who did one before ?

Wbr Adam.

I have kill 3 :joyous:, in the searching i end with this conclusion, dash dies (dysplay dead) because data corruption, nothing about with CKS, you can change the KM and dont need correct any CKS.

So, if you get good dash DATA from another one, need to be same number, you will see that dash is alive, after that you need code the IMO on the dealer.

I have used several tools, UPA in the top, somethimes only the fact of reading the processor the data go corrupted, its a very sensible dash :afraid:, now several tools can do it by diag, the best way IMHO....

Excuse my bad English.

[catala20032004]

Anyone has a dump for this dashboard Ford Fiesta 2010 8a6t-10849 BM? Visteon? I killed the dash

[drpeter]

Anyone has a dump for this dashboard Ford Fiesta 2010 8a6t-10849 BM? Visteon? I killed the dashHere it is...

[diagtech]

I did one last week with smelecom reading micro went fine.

[catala20032004]

Hi Dr Peter, Sorry but i didn't get to try your dump. I sent te car to dealer. The client was impation to solve the problem.

[honingkoning]

Guys what would be i good/save tool to read this mcu on pcb.
I know upa can do it but what would you Advice.

Wbr Adam.

[squirrelbandy]

hi , can somebody please give good connection picture ect fo UPA , i have 1 to practice with . mine is MC9S12XEQ384VAG 144 leg

[viejomatius]

I did it too, with UPA all ok, no problems at all!

Hello partner Could you please help me posting diagram to read 9s12xeq384 for UPA-USB, thanks

[TRISIEN]

I help my friend to change dash fiesta MC9S12XEQ384 i ned 71245
sory anglais

[nikz]

Here is your dump mod as you requested

[neospeedo]

71180km very close!

[TRISIEN]

thank you very much my friend work well