PDA

View Full Version : mercedes w203 220 cdi dont start



quikcar
11th September, 2014, 01:38 PM
I've got a 2001 C-Class W203 220 CDi


after a short circuit on the battery
which caused damage to ECU and SAM
I buy these two parts i adapt the ECU to the car from the original ecu

276797276798


I replaced it but the engine is not running with the key
dashboard ok
I verified the cicuit startup relay K46 + K79 + K4

276800
i start the engine directley from the starter
engine cranks but not starts


Diagnostic Trouble Codes (DTC)
p2200
p1482
p0600
p1470
p1189

help thx

ominimicu
11th September, 2014, 05:56 PM
u sure u bought same ecu? and soldered flash ok?

quikcar
11th September, 2014, 06:05 PM
yes
i tested all pin

ominimicu
11th September, 2014, 06:14 PM
check fuses and wires...i wouldhave swapped immo eeprom only first

quikcar
11th September, 2014, 06:46 PM
first i chaned the immo eprom 5p08c3 car dont start
so i changed the flash 29fxxx also
can the BUS CAN do the failure?

quikcar
11th September, 2014, 06:53 PM
first i chaned the immo eprom 5p08c3 car dont start
so i changed the flash 29fxxx also
can the BUS CAN do the failure?

quikcar
11th September, 2014, 06:54 PM
first i chaned the immo eprom 5p08c3 car dont start
so i changed the flash 29fxxx also
can the BUS CAN do the failure?

why the car did not start when I try to start directly from the starter?

ominimicu
11th September, 2014, 10:50 PM
looks like immo when starter wont spin..
u sure u got same ecu? i mean same hardware?

ikhan22
11th September, 2014, 11:14 PM
check fuses

quikcar
12th September, 2014, 09:14 AM
its the same ECU the same hardwear evrey thing is the same

quikcar
14th September, 2014, 05:08 PM
hi
can some one give me a good dump my original VIN is WDB2030061A256812 & i find in the dump 95P08 onother VIN WDB2030061A058995
maybe this is the problem
A0001535279
0281010851
CR2.11 2.2L
HW 14.00
SW 14.01
95p08
277256

29f800
277257

help plz

thx

quikcar
15th September, 2014, 12:34 PM
HI
SOME HELP PLZ

smayer
15th September, 2014, 10:34 PM
Maybe the problem is diferent software versions in old and new ecu's. Don?t swap eeprom or flash, just make new ecu virgin and adapt "drive autorization" with DAS.
Use this virgin 95p08 dump.

quikcar
16th September, 2014, 11:00 AM
Maybe the problem is diferent software versions in old and new ecu's. Don?t swap eeprom or flash, just make new ecu virgin and adapt "drive autorization" with DAS.
Use this virgin 95p08 dump.

i have not mb start
how can i (adapt "drive autorization" with DAS.) i aske mercedes he say we can do adapt only online
if you have procedure step by step
thx

quikcar
18th September, 2014, 11:05 PM
problem solved:top:

big thanks to smayer (http://www.digital-kaos.co.uk/forums/members/291314-smayer/)

mbsupport
19th September, 2014, 06:59 PM
what was the problem mate? Tell us.

quikcar
30th September, 2014, 06:02 AM
the problem is
BUS CAN X81
speed pb
thx for all