A8 ABS dump 4H0 907 379 A

[DNAutotech]

Hi,

I am going to retrofit ACC, on this car, Audi A8 2010, so now
i need new software for the ABS unit
4H0 907 379 A :-)

Really hope someone can help!

Best Regards
Dan

[veloseeped]

Hi,

I am going to retrofit ACC, on this car, Audi A8 2010, so now
i need new software for the ABS unit
4H0 907 379 A :-)


May be .sox flash container for writing using ODIS will help you? :smile:

[DNAutotech]

Yes please, that would be great :-)

Thanks in advance

[veloseeped]

Arrived....

[DNAutotech]

Thank`s, that`s great :-)
I will try it out on monday

Regards

[DNAutotech]

Hi
Just tried to flash the ABS Ecu, it Works fine, but the index doesen`t change to "A"
Any suggestions, what to do?
Update programming


ECU: 03 - Brakes 1

09.10.2014 08:52:59



LL_Brake1UDS (EV_ESPPremi_004)








Flash process

09.10.2014 08:52:59



Session:

4H0907379A0151



Result:

job completed successfully



Duration:

03:11










Property

Before the update

After the update



VW/Audi part number

4H0907379

4H0907379



Software version

0151

0151



Hardware part number

4H0907379

4H0907379



Hardware version

H08

H08



ASAM/ODX file identification

EV_ESPPremi

EV_ESPPremi



ASAM/ODX file version

004012

004012



[SO]_Param_VWTesteCodinInfor





Coding

E4 EA A2 00 27 57 45 00 E3 00

E4 EA A2 00 27 57 45 00 E3 00



System abbreviation

J104

J104



Vehicle equipment code

00 00 00 00 00 00 00 00

00 00 00 00 00 00 00 00



Parameter set part number

NULL

NULL



Parameter set version

NULL

NULL



System description

ESP PREMIUM

ESP PREMIUM



Program memory status

programmable Program available

programmable Program available



Programmability

programmable

programmable



Program consistency

Program present

Program present



Parameterizability

[VO]_NULL

[VO]_NULL



Data consistency

[VO]_NULL

[VO]_NULL



Error during last data record download

[VO]_NULL

[VO]_NULL



Data record modification

[VO]_NULL

[VO]_NULL



Vehicle Identification Number (VIN)

NULL

NULL



FAZIT-identification

BPA-08502.02.1000354066

BPA-08502.02.1000354066



Serial number

--------------

--------------



Engine code

NULL

NULL



Versions of software module

ODS8023E?Infrastructure.Vehicle (EcuCom):?An error occurred during data input or interpretation of data.?Possible causes:??- One of the entered values is outside the valid value range.?- The control unit returns implausible data.??The MCD system reports the following error:?Error code: <0x0000C028>?Error code description: <ePAR_INTERPRETATION_FAILED (Error: No LeadingLengthInfo found (PDU too short): Required bits: 32, available: 0)>

ODS8023E?Infrastructure.Vehicle (EcuCom):?An error occurred during data input or interpretation of data.?Possible causes:??- One of the entered values is outside the valid value range.?- The control unit returns implausible data.??The MCD system reports the following error:?Error code: <0x0000C028>?Error code description: <ePAR_INTERPRETATION_FAILED (Error: No LeadingLengthInfo found (PDU too short): Required bits: 32, available: 0)>







Regards

[veloseeped]

I have decompess and compare content of both flash containers - ...379A.sox and ...379.frf
Seems both primary odx files and bin data blocks inside are equal !!!
See extracted odx text:

...
<EXPECTED-IDENTS>
<EXPECTED-IDENT ID="EMEM_4H0907379A0151.SES_4H0907379A0151.EI_VWSpareP artNumbe">
<SHORT-NAME>EI_VWSparePartNumbe</SHORT-NAME>
<LONG-NAME>VW Spare Part Number</LONG-NAME>
<IDENT-VALUES>
<IDENT-VALUE TYPE="A_ASCIISTRING">4H0907379A </IDENT-VALUE>
<IDENT-VALUE TYPE="A_ASCIISTRING">4H0907379 </IDENT-VALUE>
</IDENT-VALUES>
</EXPECTED-IDENT>
<EXPECTED-IDENT ID="EMEM_4H0907379A0151.SES_4H0907379A0151.EI_VWAppliS oftwVersiNumbe">
<SHORT-NAME>EI_VWAppliSoftwVersiNumbe</SHORT-NAME>
<LONG-NAME>VW Application Software Version Number</LONG-NAME>
<IDENT-VALUES>
<IDENT-VALUE TYPE="A_ASCIISTRING">X144</IDENT-VALUE>
<IDENT-VALUE TYPE="A_ASCIISTRING">X145</IDENT-VALUE>
<IDENT-VALUE TYPE="A_ASCIISTRING">X146</IDENT-VALUE>
<IDENT-VALUE TYPE="A_ASCIISTRING">X148</IDENT-VALUE>
<IDENT-VALUE TYPE="A_ASCIISTRING">X149</IDENT-VALUE>
<IDENT-VALUE TYPE="A_ASCIISTRING">X150</IDENT-VALUE>
<IDENT-VALUE TYPE="A_ASCIISTRING">X151</IDENT-VALUE>
<IDENT-VALUE TYPE="A_ASCIISTRING">0151</IDENT-VALUE>
</IDENT-VALUES>
</EXPECTED-IDENT>
</EXPECTED-IDENTS>

...

[veloseeped]

Just tried to flash the ABS Ecu, it Works fine, but the index doesen`t change to "A"
Any suggestions, what to do?


Maybe the reason is coding not main flash?
Because inside raw bin flash data we can see both text strings - 4H0907379 and 4H0907379A

[DNAutotech]

Well, maybe you`re right.
I just compared it to a similar car whith Factory installed ACC, and there the "A" ecu is fitted.
But i will give it a try whith the coding

[DNAutotech]

I now tried to change the coding, but i can`t.

It won`t save the new values.

Is there a login code for this ecu??

[veloseeped]

According ODIS or VASPC informaton:
"The coding for the control unit in this vehicle can only be calculated and executed via SVM (Software Version Managment)"

[DNAutotech]

Yes i know, but there are no SWM code to recode abs ecu to fit acc.
So I guess the solution is another ecu..