Reset service for Nissan Juke 2011

[electrones]

Hi friend

Someone can help me with procedures to do reset service for Nissan Juke 2011, please!!
I have tested some but doesn't work!!! Can?t do manually!?!?

Thanks

[vasko]

https://www.youtube.com/watch?v=nFKDXtXPRnI
sucsess

[smirnoff_rules]

Resetting service interval indicator

Switch ignition ON.
Within 5 seconds: Press and hold button 126735.A until the 'spanner' symbol and distance remaining to the next service start to flash.
Release button 126735.A.
Press button 126735.A once.
Wait for display to return to oil level indication.
Switch ignition OFF.
button on the right is A

[Meat-Head]

Is there really a button with a long number on it?

[dom8]

Is there really a button with a long number on it?

Mate what a humor?? you got joke always..men.... :))

[electrones]

Resetting service interval indicator

Switch ignition ON.
Within 5 seconds: Press and hold button 126735.A until the 'spanner' symbol and distance remaining to the next service start to flash.
Release button 126735.A.
Press button 126735.A once.
Wait for display to return to oil level indication.
Switch ignition OFF.
button on the right is A

Hi friend
I have tried your suggestion but doesn't work on this Juke, i dont understand why!?
I have correct oil in engine 5W40 reset service doesn't work, maybe need nissan consult to do this!!?

[autotrans]

a friend in the trade asked me to reset the service light on 2012 audi with vag-com (no joy).
contacted ross-tec who were very helpful and gave me instructions on how to do it (deep joy).
the point is, a lot of vehicles after 2010 use the new U D S sytem, you need to type in the
time\distance\ect\ect to the next service, and a dealer number to except this information.
perhaps consult is the way to go.

[smirnoff_rules]

found another one but if can has dpf only consult can reset


Switch the ignition ON. (One click)
By pressing and holding the clock switch (clock switch is RH switch in meter) about 3 seconds while the
maintenance distance and wrench symbol are displayed (about 5 seconds after turning on the ignition).
It comes to setting mode. The maintenance distance and wrench symbol will flash.
While these are flashing, press the clock switch to display the current maintenance distance.
Press the clock switch again to increase the setting distance by 500 miles (1000km) increments.
The maximum setting is 31,500 miles (63000 km).
Pressing the clock switch one more time after this will
return the setting to 0.
When the setting procedure is complete, do not touch the switch for 5 seconds (until odo meter: ON,
wrench symbol: OFF).


looks like l will have to buy another toy

[Meat-Head]

What ever happened to the EEC legeslatikn "All leppers and retards MUST be able to reset oil service with no tools"

PARTLY ON TOPIC:-

Think was either Nissan or Peugeot, if gies NINE miles past a service, it has to be reset via dealer tool.

Doesn't benefit anybody, just puts the price up for the end user (TM)

[smirnoff_rules]

What ever happened to the EEC legeslatikn "All leppers and retards MUST be able to reset oil service with no tools"

PARTLY ON TOPIC:-

Think was either Nissan or Peugeot, if gies NINE miles past a service, it has to be reset via dealer tool.

Doesn't benefit anybody, just puts the price up for the end user (TM)

autocom has the option to reset So looks like l don't need to buy other toy

im sure my autoboss does too

[autotrans]

Tried autcom 2.13.1 on the audi, service light reset was listed but did not work

[smirnoff_rules]

Tried autcom 2.13.1 on the audi, service light reset was listed but did not work

im talking about Nissan Juke 2011 ? same as heading
if u have an vag car and cant clears service light u have to set these to 0
Channel 53 - Distance since Inspection
Channel 55 - Time since Inspection