Key Codes location

[aassfour]

hey guys
i know many like me dont know where to find the key cutting code location for different cars , some is door lock , some on the ignition, some is 5 digits , some is 8 digits , different cars has different codes in different location and some u only find it by OBD tools or by VIN or by dumps.

if its possible to place here on this thread the location of each code for each car for those who u know and like that we can make a nice database that i m sure will help many many including me :)
would be better if we can include picture :)

[aassfour]

BMW CAS system , it can be extracted from CAS by obd or by DUMP. starts with HA000**** . donno if it can be found anywhere else in car or stamped on a lock or so

[ray-ray]

Most Acura and honda all locks on car have code stamp last 4.
most lexus and toyota non transponder passager side door lock. Transponder base system have no lock on passager side, so they move it to the driver side.
Saab the trunck lock has the code stamp. Non h.s.
vw beetle driver door lock is stamp

[instakeys]

Useful thread this...
Suzuki mostly on door lock too - Drivers side (in UK, passenger if LHD, until like Ray-Ray says only one door lock - then it's on that) always usually stamped near top/side of barrel.

Classic VW beetle, bus, karmann ghia etc - code on all locks & ignitions. Door locks/handles sometimes need the end cam removing to see code underneath.

Did a 1997 Celica the other day there, had to loosen 2 bolts inside to release the handle, push outward to reveal barrel, TOY43 code stamped near the top.
As a rule of thumb, any older Japanese vehicles I get - always worth removing door lock to check for code.

I'll test what I find in this thread, and post pics of any I find...

[doolittle]

Saab 9000 stamped on ignition

first shim to get out

[armpower]

Fiat cars have stamped the key code on ignition lock.Just remove the ignition lock , the code is stamped on the side of lock.

[siyadk]

Holden commodore needs to get mechanical key code from obd

[stalonerambo]

Fiat cars have stamped the key code on ignition lock.Just remove the ignition lock , the code is stamped on the side of lock. sip 22 //;;////

[power44]

Anybody know where Subaru key code is? 2006 Subaru impreza?

[Automat]

Holden commodore or Cherovelt lumina or caprice needs to get mechanical key code from obd

Perhaps we all mention instances where you will need a key to turn lock first?

[ArnautuIonut]

For Mazda 3 / 2004 i found code inside door near door handle .

[aassfour]

For some benz you can find the code located at plastick trunk lock,
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=301916&stc=1
in this picture the 005 is the code

[key4man]

hi
1- by dump
2- obd t-300
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=301926&stc=1

[camelgd]

Anybody know where Subaru key code is? 2006 Subaru impreza?
On passenger door lock cylinder.
One trick I use is to use flexible scope to view door lock cylinder codes, whenever possible. I use this trick on older Mitsubishi eclipse and Chrysler equivalent Sebring(MIT1), also older Ford Probe/ Mazda 626. Sometimes it is easier if you have hand crank windows to lower before putting in scope. Small diameter scopes available for 75-125 USD china suppliers. You don't have to pull panel, so it saves time.

[labusas]

Hi, What year is this MB lock from? How to interpret code 005 to cuts? can't find it

[ArnautuIonut]

For Fiat cars , in this example the cutting code is 6 3 6 1



http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=302039&stc=1

In Opel Vectra C after "wake up can "(push os pull the buttons , turn on the lights , hit brakes , scream , e t c ) you can read mechanical key code from CIM , no need pincode for this .
For other Opel cars after put on the ignition ( play with + on dash fuses ) you can read the mechanical key code from imobilizer gen 1 and 2 .

[cjawahir]

Nissan navara 2006 -2010 uk and Thailand model i dont see any key code written , so u need to open door lock and get code 3-10 from the wafer , then use cutting tree to get one to work on ignition .

any one know a better way let me know .

cj

[autofan1965]

Lishi 2in1 working great on NSN14 from nissan. You can save a lot of time:)

[cjawahir]

Lishi 2in1 working great on NSN14 from nissan. You can save a lot of time:)

yeah it save some time opening the lock but i still need to cut about 5 keys to have one to work on the ignition , because the pick cannot pick the ignition to get wafer one and two .

is there an easy way to open the ignition to get the wafer or is there a code hidden some where .

cj

[estate]

For Fiat cars , in this example the cutting code is 6 3 6 1



http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=302039&stc=1

In Opel Vectra C after "wake up can "(push os pull the buttons , turn on the lights , hit brakes , scream , e t c ) you can read mechanical key code from CIM , no need pincode for this .
For other Opel cars after put on the ignition ( play with + on dash fuses ) you can read the mechanical key code from imobilizer gen 1 and 2 .

using what tool for opel?

[camelgd]

Two options: First, impression first two tumblers, look for marks and cut down on code machine til you have working key.
Second, 3 keys max- 1st key, 11, 12, 13, 23, 24, 34, 44
2nd key, 21, 31, 32, 42, 43
3rd key, 22, 33

[MarkPRP]

Is there any other location on Mercedes?

[ArnautuIonut]

using what tool for opel?


( play with + on dash fuses ) No tool needed .Just few wires .

[estate]

I understand with wires etc, I meant what tool to read?

[ArnautuIonut]

No reading , just have acces to immo by ex OPCOM, find the mechanical key code , put the code on Instacode , after, you have direct cutting code .

[dave11674]

heres one
zafira 2004
opcom
talk to dashboard or immo box
cant remember which but it gives mechanical key code there

dave

[autodigitec]

Is there any other location on Mercedes?
I would also like to know a bit more of mechanical key codes in mercedes. Any info ira appreciated.

Enviado do meu ZP998 atrav?s de Tapatalk

[autofan1965]

yeah it save some time opening the lock but i still need to cut about 5 keys to have one to work on the ignition , because the pick cannot pick the ignition to get wafer one and two .

is there an easy way to open the ignition to get the wafer or is there a code hidden some where .

cj

My friend already was introduced nsn14 3in1 wich cover 10 wafers from ignition:)

[cjawahir]

My friend already was introduced nsn14 3in1 wich cover 10 wafers from ignition:)

ah its a new product , good i will check it out .

cj

[ArnautuIonut]

heres one
zafira 2004
opcom
talk to dashboard or immo box
cant remember which but it gives mechanical key code there

dave

You comunicate with immo for the mechanical key code not dasboard , this procedure apply to astra g , vectra b , astra f , corsa c immo and bcm type , opel combo , corsa b with immo , opel meriva .

[key4man]

hi
Honda accord 1997
code location trunk lock
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=302731&stc=1

[kaToo]

I have here a chrysler pacific ignition lock . is code stamped in ignition on this car or not .
I have only a sticker with some numbers in ignition ..!

[doolittle]

Daihatus terios 2002 stamped on drivers door barrell

[Automat]

I have here a chrysler pacific ignition lock . is code stamped in ignition on this car or not .
I have only a sticker with some numbers in ignition ..!

No code on chrysler ignition.

[bitocu]

Hi, with original key code, how you do to cut the key ?

[Automat]

Use instacode software to decode the number, cut key with code machine like this:

http://www.lockpicks.com/framon-2-code-machine.html?gclid=CNrJ3bLftMQCFY17fgodZAsANA

http://www.aliexpress.com/item/2014-Newest-Arrival-IKEYCUTTER-CONDOR-XC-007-Master-Series-Key-Cutting-Machine-by-Fast-Express-Shipping/1583230026.html

[insomnia2009]

how about vw golf mk 5 anyone know were the cut code is

[Recoder]

Open Read Lock with lishi 2 in1 or rake open and strip down and read numbers .
1, 2 ,3,4,etc and 11=1 12 =2 13=3 14=4 8 cuts in all
Has been listed on here many times mate do a search hu66 .

[key4man]

hi
the code location on the front passenger side under the fuse panel u can see the 5 digit code on the sticker

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=306559&stc=1

[totalkey]

hi
the code location on the front passenger side under the fuse panel u can see the 5 digit code on the sticker

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=306559&stc=1
This is for What Car?

[whiskeyman]

It's in his post

[Hanukkah]

Anyone know where the key code is on a 02 volvo s60? Thanks.

[soxten]

Hanukkah: in Cem.



Christian Johansson via Iphone 5s

[Hanukkah]

@soxten - you mean in cem dump?

[camelgd]

In American market, no codes on any side milled key system Volvo locks.

[instakeys]

Did a lost keys Pajero IO Pinin thing the other day. Popped boot lock out first (because it's a 2min job) No code there, but thought I'd look on boot just in case. Dint bother stripping boot lock down tho, just put it back.
MIT11 Code was as I thought on the drivers door lock. Can't be viewed with a scope thru window rubber from outside, barrel slides inside handle assembly and is completely covered, door card off job.

[eepromRipper]

anyone have an idea where the key code for honda accord 2003 is stamped? searched everywhere.

[cjawahir]

check post 6 this link http://www.digital-kaos.co.uk/forums/showthread.php/319765-Honda-Civic-key-code?highlight=honda+lock+code

cj

[usman295]

Honda key codes almost on every lock but hard to see if rusty always start from an alphabet eg: M708

Lexus 1992-1997 passenger side 4digit code
1998-2014 passenger side 5digit code if no lock on passenger side then driver side starts with 4 and 8

Cheve Caprice and Lumina 2001-2006 Via OBD Mechanical code

Suzuki swift and 2006 onwards on driver side 5digit code starts with 6

[Hanukkah]

Hanukkah: in Cem.



Christian Johansson via Iphone 5s

Here is CEM dump... Can you tell me what the mechanical key code is? Thanks

[soxten]

Send me pm plz


Christian Johansson via Iphone 5s

[otokeys]

Hi ...
This is a list of ford key codes from vin
VIN >>> KEY CODE + RADIO CODE
I hope it'll be useful for some of you .

[totalkey]

Hi ...
This is a list of ford key codes from vin
VIN >>> KEY CODE + RADIO CODE
I hope it'll be useful for some of you .
What market?

[insomnia2009]

anyone know were the cut code is on a ford mondeo year 2001

[stalonerambo]

hi guys need a code for this one ford, fiesta 2000 , cut are 331412 , f........a ,

[Carkeysa]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=310076&stc=1


Mazda 2 Drivers Door Lock

[Bllinda]

1432125254
Series Rule:
Biting trial order is Odd/Even/Odd/Even or Even/Odd/Even/Odd ...

[Bllinda]

I did not find the desired.
Ford'00-'02 F T1051-241434


hi guys need a code for this one ford, fiesta 2000 (mk4)-T2330, cut are 331412 , f........a ,

P.S. T1457-331412

[viorelcarl]

for fiat punto i have stamp on lock
<< 153
1102 >> blade is GT15R
somebody help me with cutting code ? in didn t find in istacode

[topclef]

this is your cutting code ,

[instakeys]

Fiat cars have stamped the key code on ignition lock.Just remove the ignition lock , the code is stamped on the side of lock.

I'm going to have a go at this today on a 2004 Punto.
I can't find my GT15 Lishi anywhere - whats the best way to extract the barrel from this?

[p1et]

I'm going to have a go at this today on a 2004 Punto.
I can't find my SIP22 Lishi anywhere - whats the best way to extract the barrel from this?

When the trunk lock is in good condition it is also good to make a key from it. Just 2 screws holding the lock and then, there is only 1 pin need to be removed and the plug comes out with key code stamped.

EDIT: In good condition I meant if customer is sure the key worked also in this lock.

[instakeys]

Thanks p1et. Useful information!

[parapilot]

When the trunk lock is in good condition it is also good to make a key from it. Just 2 screws holding the lock and then, there is only 1 pin need to be removed and the plug comes out with key code stamped.

EDIT: In good condition I meant if customer is sure the key worked also in this lock.

dont waste your time boys, most of these puntos, open passanger door, you will see an airbag lock. pops out in 5 seconds. All cuts are inside, and number printed on barrel. 2 min job.

[instakeys]

I'll test this mate. Good tip. Sounds faster than picking and decoding...
I'll post some pics to help others when I finally get back to the car.


Sent from my iPhone using Tapatalk

[instakeys]

Good info there! I can't believe I did not know this?!?
GT15 key code stamped on barrel of airbag lock, 10 seconds to remove.

http://images.tapatalk-cdn.com/15/09/24/0b1b4faa9da6e1796e4e10e6a9ced631.jpg

http://images.tapatalk-cdn.com/15/09/24/f64f387c00450646dd73741ab3bb73a4.jpg


Sent from my iPhone using Tapatalk

[totalkey]

Amazing, maybe good for grande punto?

Sent from my VOYAGER2_DG310 using Tapatalk

[instakeys]

I think in future I'll try this on most Fiat/Alfa etc and post pics of what I find. Very good info this!

[ArnautuIonut]

332670
On vw golf mk3 y 1994 , stmped on drivers side lock

[Bllinda]

instakeys (http://www.digital-kaos.co.uk/forums/member.php/382449-instakeys)
How this is done within 10 seconds with a paper clip?

[kemaster]

instakeys (http://www.digital-kaos.co.uk/forums/member.php/382449-instakeys)
How this is done within 10 seconds with a paper clip?

If you mean what is seen in his hand on picture- I don't think it's paper clip :). This might be the retaining clip that holds the plug

[instakeys]

If you mean what is seen in his hand on picture- I don't think it's paper clip :). This might be the retaining clip that holds the plug

Flathead screwdriver removes the lot from the dash with a gentle pry...
Pop the metal clip out that kemaster pictured with same flathead - barrel falls out. 10 seconds! Dead simple.

[paul_12345]

Good info there! I can't believe I did not know this?!?
GT15 key code stamped on barrel of airbag lock, 10 seconds to remove.

Sent from my iPhone using Tapatalk

but does the plug pull out without having the key in?

[parapilot]

Yes mate it will.

[Bllinda]

Flathead screwdriver removes the lot from the dash with a gentle pry...
Pop the metal clip out that kemaster pictured with same flathead - barrel falls out. 10 seconds! (https://www.youtube.com/watch?v=kdZi6JiS4-c) Dead simple.

With such could only Curtain can open. Bitting reach .... or is it not necessary ...


but does the plug pull out without having the key in?

[7936]

in us go buy autosmart.

[instakeys]

For some benz you can find the code located at plastick trunk lock,
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=301916&stc=1
in this picture the 005 is the code

Will this apply to a 1992 Mercedes 280 E (W124)
Got to do one later, but the door lock is different from ignition lock!?!

[camelgd]

in us go buy autosmart.
Too many trips to that well, and you'll find yourself working for peanuts while code company is eating your biscuits and gravy!:banghead:

[gbovs]

Hi
What amazing thread..just started in auto locksmith - have the equipment and lack the knowledge but it is nice to see that a lot of people tak the time here to help others.
What I am looking for is I have a ford transit UK model year is 2000..
Is the keycode stamped on the drivers door drain hole slot - heard it was marked with cuts on the actual shims and you can see it when you either remove the lock or scope it from inside the vehicle - owners original key is all but unreadable.

[jilen raicha]

Many thanks for this info guys...
God bless you all

[MarkPRP]

Will this apply to a 1992 Mercedes 280 E (W124)
Got to do one later, but the door lock is different from ignition lock!?!

No. but maybe a nice person can find the key number for you


Sent from my iPhone using Tapatalk

[obeids]

Hi there Guys.

Great Thread here.....


Nowadays I find many newer cars that have numbers stamped on them but these number aren't INSTACODE compatible. I found codes on Toyota, VW and others but these aren't the standard Instacode type.
Is there some "NEW" Database that the manufacturers are now running on or what?

[Cr4nky]

Hi
What amazing thread..just started in auto locksmith - have the equipment and lack the knowledge but it is nice to see that a lot of people tak the time here to help others.
What I am looking for is I have a ford transit UK model year is 2000..
Is the keycode stamped on the drivers door drain hole slot - heard it was marked with cuts on the actual shims and you can see it when you either remove the lock or scope it from inside the vehicle - owners original key is all but unreadable.
If you strip the lock, then the discs normally have number stamped on them, or you can tell what cut they are just by looking at them. These locks are very easy to pick and decode though, so that is always the way to go.

Sent from my SM-G930F using Tapatalk

[instakeys]

Buy a tibbe pick.

[odorepairer]

2007- 2012 Holden VE commodore/ Pontiac G8/ vauxhall vx r8 in immo dump

Code is highlighted 61137

I've also attached a pic of connection using UPA

Orange- p5
Blue- p6
Green- p7
Yellow- p9

http://uploads.tapatalk-cdn.com/20170108/4abbeff89eb82df69e9799793fc26ed3.jpg

http://uploads.tapatalk-cdn.com/20170108/77d293ed8cb0282e0cb3cdacce903480.jpg




Sent from my iPhone using Tapatalk

[SoranoV]

Does anyone know where is the key code location on 2014 Subaru's
I have 2 Crosstrek's and 2 Forester's that all keys lost

[meteor80]

How about Mercedes CLS?
Is somewhere key code stored or written?
BR.

[szengen]

Ferdek of two fikofki side, two right and two left

[MarkPRP]

How about Mercedes CLS?
Is somewhere key code stored or written?
BR.

No chance


Sent from my iPhone using Tapatalk

[instakeys]

427213

Fiat SIP22 code on ignition as posted earlier in thread.
(Fiat 500)

[just4upal]

i'm sorry but how we can read the code from this stamp

427213

Fiat SIP22 code on ignition as posted earlier in thread.
(Fiat 500)

[p1et]

Code is 00387. In instacode SIP22 serie got prefix DE. So DE00387 will give you bittings.

[xgate]

can somebody help me with key code location on 2006 MAZDA PREMACY JAPANESE IMPORT.

Thank you.

[dave11674]

hi
1- by dump
2- obd t-300
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=301926&stc=1


hi mate what part of the car are you reading ?? Clocks ??
and dont ignition need to be on to do this ?
What if all keys lost ?

[fytfh]

Where is located key code on vw touareg 2005 year

[rola1971]

Where is located key code on vw touareg 2005 year


for vw car you used pic hu66

[fytfh]

I now but i have lishi china and not can decode with this tools thanks

[rola1971]

I now but i have lishi china and not can decode with this tools thanks


buy orginal lishi and it work 100%

[fytfh]

where to find key code mitsiubishi lancer 2003year THANKS

[fytfh]

on driver door i find this code 30246 and right cutting code is 32541234?

[jaelgti]

where can I find the citroen c3 code of 2003
If possible, thank you very much

[WRX 14]

Is there anywhere to find lock code for BMW E39?

Thanks in advance

[cjawahir]

Is there anywhere to find lock code for BMW E39?

Thanks in advance

no code , need to pick the lock and read bitting with lishi .

cj

[simplo]

Hi ,Where is it located on Peugeot 407 an idea ?

[Jonisaac]

PSA stuff, citreon and pug. Do they have key numbers stamped??

[labusas]

Hi. Please advice on finding key code on Chevy suburban 2012. Thanks

[mdnsubuga]

Thank you very much. Far too kind

[camelgd]

Ignition plug only, must be removed to be seen, for 2012 Suburban.

[Friends4eva]

What if the customer don't want the door lock to be removed??
Is there all in VIN to keycode calculating software that covers all types of vehicle?

I also hear some locksmiths they have access to some vendor database ( toyota for instance) to get keycodes, Is that true?

Thanks for your response, very helpfull all

[camelgd]

Let Mr Li be your friend...

[hai82der]

2012 malibu key code locations, i try with lishi GM37 but the door lock I think it's broken i can turn it to unlock with only picking number 4

[hai82der]

2012 US Toyota camry, keycode in driver door lock .

[sleepyrz]

2012 malibu key code locations, i try with lishi GM37 but the door lock I think it's broken i can turn it to unlock with only picking number 4

On ignition remove and read

[darknezz19]

Had a couple GM door locks that picked on the first or second bound wafer. Still decoded fine though.

[hai82der]

I will try to remove the ignition today i hope its not hard to do it. all wafer decode give me number 1 ? and 4 its 3

[super jumbe]

What if the customer don't want the door lock to be removed??
Is there all in VIN to keycode calculating software that covers all types of vehicle?

I also hear some locksmiths they have access to some vendor database ( toyota for instance) to get keycodes, Is that true?

Thanks for your response, very helpfull all

Send him to steeler...

[super jumbe]

dont waste your time boys, most of these puntos, open passanger door, you will see an airbag lock. pops out in 5 seconds. All cuts are inside, and number printed on barrel. 2 min job.

There is no airbag lock on Punto Grande from 2006 onwards and no codes on door locks only on old Punto….

[castin]

Hi. Mercedes Sprinter 2002 - possible to find key cut code? AKL sit.

[sleepyrz]

I will try to remove the ignition today i hope its not hard to do it. all wafer decode give me number 1 ? and 4 its 3


get hu100 IRT set of 4
and the a1 rocker pick set/ tension tools for gm

and did you cut this key and try it in the door then????????!!!!!!!!!!!?!!?!?!

[rojhat]

hi member have chevrolet captiva all key lost
for cutting code on barrel or igntion any one have find or give me location maybe

br

Envoyé de mon SM-A605FN en utilisant Tapatalk

[DigitalBacon]

Any idea where is the code located on a VW Golf 2012

Sent from my SM-G955F using Tapatalk

[szengen]

lishi.....................

[DigitalBacon]

lishi.....................I know.. Planning on buying a set next month.

Sent from my SM-G955F using Tapatalk

[no1baggiesfan]

No reading , just have acces to immo by ex OPCOM, find the mechanical key code , put the code on Instacode , after, you have direct cutting code .

Been googling for info on code finding for my vec c, found this thread, still do not understand this post :/

[rojhat]

hi member have chevrolet captiva all key lost
for cutting code on barrel or igntion any one have find or give me location maybe

br

Envoyé de mon SM-A605FN en utilisant Tapatalkhi no cut code found on all . decode barrel dwo5 drectly .

Envoyé de mon SM-A605FN en utilisant Tapatalk

[jaelgti]

Hello colleagues, I have these lock codes, I want to cut with condor mini
What code do I have to enter?
in post 16 it is commented, but it is different
can you help me?
Greetings DK, and thank you very much

[p1et]

Hello colleagues, I have these lock codes, I want to cut with condor mini
What code do I have to enter?
in post 16 it is commented, but it is different
can you help me?
Greetings DK, and thank you very much

Code: DE0995
Bittings: A B B D C D D C

[p1et]

From your PM that you need 9 cuts, then it's GT15 key profile:

Code: W000995

Bittings: 1 3 2 3 1 3 2 3 2

[jaelgti]

mistake, I'm silly

[jaelgti]

From your PM that you need 9 cuts, then it's GT15 key profile:

Code: W000995

Bittings: 1 3 2 3 1 3 2 3 2

Thank you very much friend.
After cutting, I was doing tests with the door lock.
I think the client made some change

[holbi1]

Friends Honda Acord 2007 where i can find key cutting code on this little lock glovebox will be something ?

[sleepyrz]

valet lock cylinder on floor by trunk release

just pull lock up and oiut and read code

[holbi1]

But there is no valet lock in 2007

[sleepyrz]

It's a hatchback?????

Every single one I've seen has a valet cylinder on the floor629154

But yes glove box lock or door lock will have code

[holbi1]

No it was combi and key cutting code was on lock from driver side begining from L letter L 496 werry small number so for future this will help us .

[JFR-Tuning]

Hi can any m8 tell me what is here the cutting code
it is Fiat Punto 2003 from Airbag passenger switch
thnx

[key4man]

Hi can any m8 tell me what is here the cutting code
it is Fiat Punto 2003 from Airbag passenger switch
thnx
hi
w009120
key cut = 112132312

[JFR-Tuning]

super
but is it not SIP22 profil ?

How i can extract the code from the stamp by GT15?

[key4man]

super
but is it not SIP22 profil ?

How i can extract the code from the stamp by GT15?
Hello, my friend
Your key profile is gt15, and is found in older models of Fiat vehicles.
Newer models have the sip22 ,
key Cutting codes of both old and new are usually stamp, on the switch and on Airbag passenger ,
I hope I understood your questions and answered them correctly

[JFR-Tuning]

Hello, my friend
Your key profile is gt15, and is found in older models of Fiat vehicles.
Newer models have the sip22 ,
key Cutting codes of both old and new are usually stamp, on the switch and on Airbag passenger ,
I hope I understood your questions and answered them correctly

first thnx

yes shure what you answer I know I asking this because my new Dolphin xhorse get a SIP22 key for this car.
thats wrong

but one question I have

how or can I translate the stamp code on the Airbag Switch to a Code in instacode ? To get the bitting
i know for SIP22 you must take the last numbers and DE BEFORE

bur it how it works for GT15 ?

[rokibar]

very easy. insert blank key in lock and see variations. there are 3 depth. depths number 1 are not cut.

[JFR-Tuning]

Sorry I don‘ t understand newbie��

for exeble in in my case
look stamp on picture before
the last 4 digids are 9120;

the key4man translate it in W009120

my my question is :
how can I know that I must use for the GT15 key w00xxxx

i need the Manuel in instacode or other way to know how I can complete the last 4 digits of a stamp on a lock

[p1et]

W = GT15
DE = SIP22

That's all what you need

[p1et]

W series = GT15
DE series = SIP22

That's all what you need.

[JFR-Tuning]

W series = GT15
DE series = SIP22

That's all what you need.

thnx

yes it is but in each case I want to know witch is the full code and where I get the letters and numbers to complete the stamp code on Airbag switch or in other manufactures.

But i found the Problem


Solved,

the Problem was in Datasheet from xhorse Dolphin. There it is written SIP22 for a punto 2004. this is wrong . Use only instacode then you find the full numbers and fill the front letters and the the Full numbers from it. You need advance in instacode

[JFR-Tuning]

Here in picture in adavance you can see the full code ( 1)

but where I get the isn number (2)
https://www.digital-kaos.co.uk/forums/blob:https://www.digital-kaos.co.uk/1c987b9e-0403-47bd-b58b-d97722b57acfhttps://www.digital-kaos.co.uk/forums/blob:https://www.digital-kaos.co.uk/e876d65c-c86b-44be-97a7-09f430e629ed

[MVVL]

Hey. How to determine the mechanical key code Hummer H3 ?

[sleepyrz]

Hey. How to determine the mechanical key code Hummer H3 ?


code on ignition

lishi door lock

dissasemble lock and put in a blank and read by eye

[redliner]

Hi
How to determine beating code from door lock stamp in Peugeot Partner 2011 ? please help
759413

[P&D]

That code only gives this in instacode see photo

but I think it should be HU83

[redliner]

That code only gives this in instacode see photo

but I think it should be HU83

Thanks but I checked this as well. Pug Partner has VA2 blade and shoul be ABCDEF code. I have lock stamp and wonder how people determine code from it. It might need different software to calculate this ? I can't use lishi car is far from me I was hoping someone can help as it is easy with other cars to do it.

[rapidlocksmiths]

thats not the key code , that will be a part number to do with the housing its stamped on , it will be ABCDEF series VA2 and these dont use a key code , they use direct codes reversed , so if the cuts from bow to tip were lets say abcdef then the dealer code would be ****fedcba

with this lock your options are

1) use lishi va2 tool to pick and decode , have them send you the lock or travel to it
2) strip the lock to read the wafers again have them send you the lock or travel to it
3) buy the key code from the main dealer and hope its not had a lock change

what you have found is not a key cut code

[khaleddaddi]

Hi,
Good luck for all,
I have a TOYOTA Corolla year 2014 all keys lost, I removed the cylinder lock from the door, it's well I found the key code (4744), but my condor xc mini plus wno't find all the bitting, I dismantle the cylinder lock and I found only 7 bitting (? 7122753), the first one is missing!
now i need someone help me to findding the firs bitting to succed with turn the key in ignition!
The key in silca (VA2TE)
Thanks in advance

[key4man]

Hi,
Good luck for all,
I have a TOYOTA Corolla year 2014 all keys lost, I removed the cylinder lock from the door, it's well I found the key code (4744), but my condor xc mini plus wno't find all the bitting, I dismantle the cylinder lock and I found only 7 bitting (? 7122753), the first one is missing!
now i need someone help me to findding the firs bitting to succed with turn the key in ignition!
The key in silca (VA2TE)
Thanks in advance
hi
u key cut is 57122753 the missing is 5

[khaleddaddi]

Hi,
key4man (https://www.digital-kaos.co.uk/forums/member.php/124017-key4man) thanks alot for your reply!

[bermuxa77]

Hello everybody. Does anyone know Chevrolet Cruze key code location? Maybe on ignition stamp or door lock or dump? Maybe any key programming tool can read it?

I dont have Hu100 Lishi so help would be greatly appreciated. Thank you in advance.

[pimpin]

need remove ignition cylinder some time key code is ther if no u need disassembly

[Weasel3]

HON66
I had this picked and read.
But insta did not come up with a result, at that time. When decoding. (Got several "Half reading", not easy to know exactly up or down a bitting).
So left it for a while.
Since occupied with other stuff.

Tried to locate a code.
Found 7I13, on the door lock
Did not work at that time.

Found some time today.
Now with more research - I found out that the "I" is actually an "L"
In the series K-L-M.

So I recon the code is either
L013
or
L713

If any have some experience with this series, by code.
I would appreciate some feedback.

I see now, that this kit would be handy.
Instead of cutting blades, all day long for testing.

https://www.aliexpress.com/item/32818901609.html

[Ecuprog31]

Hon66 ive did one
i have disassembled lock and read code on wafer and no success
ive changer ignition with lock

[Weasel3]

Hon66 ive did one
i have disassembled lock and read code on wafer and no success
ive changer ignition with lock

I also disable the lock, and made a key which turn the door lock. (On this vehicle, but not working on the ignition).

There is something very strange with those.
Because standard key delivered, is cut the same on both sides of the key. 2 different cuts.

But when you take the lock apart.
And make a key which turns the lock.
It is 4 different cuts, to make it work.

It works, did it on a DAT17 earlier.
Worked out fine.
Since the car had KeylessGo. AKL car.

But I know, its not the real solution for this.
I have no idea, how this is possible.
But that's how it is.

[lion0304]

Last week i've used first time Lishi HON66 not for Honda car but Chinese Haval H6.

The A side is common as Honda end at 5 + 1 but B side only last cut is common (1)

[Alpaholic]

I also disable the lock, and made a key which turn the door lock. (On this vehicle, but not working on the ignition).

There is something very strange with those.
Because standard key delivered, is cut the same on both sides of the key. 2 different cuts.

But when you take the lock apart.
And make a key which turns the lock.
It is 4 different cuts, to make it work.

It works, did it on a DAT17 earlier.
Worked out fine.
Since the car had KeylessGo. AKL car.

But I know, its not the real solution for this.
I have no idea, how this is possible.
But that's how it is.

I did a Jazz 2008 month ago. I picked and decode this lock. But better is take out the roll pin from the ignition. Its very easy with a 3mm drill from the side. Then use something to push the pin out. The number on the lock was the right one.

https://www.youtube.com/watch?v=w4btJpnHXFE

[duzaven]

Anybody know where Citroen Berlingo 2005 key code is?

[rob h]

Some have the pin key card.
It is not written on any lock.
So use lishi, or order a new key by vin from dealer.


Anybody know where Citroen Berlingo 2005 key code is?

[the_big_d]

The mechanical key code on PSA cars of this era comes on a paper tag with a barcode above the number. Check the handbook pack incase its been slotted in there.

[duzaven]

No, this car dont have key card,there is only an option to buy a code

[duzaven]

can anyone know the type of the key for citroen berlingo 2005?
key blade should be the same as in the photo?

[hollanda]

Its SX9 key. Also write on the picture!

[didi_du_93000]

can anyone know the type of the key for citroen berlingo 2005? (mechanical key code SA9944124)
key blade should be the same as in the photo?Cuting bit is 44124

99= no slide cut (like many berlingo)

With Tapatalk

[2560172885]

cut 1132122

[KEYTH]

There isn't 1 on Subaru that I have ever seen. Except on the older models. Then look for a sticker in the glove box or under the ashtray. If not on passenger lock that I know of. I always impression these however. Just an after thought. Rarely see them anymore..

[misterwasp77]

Is this correct for fiat 500? Picked with lishi cant .ake a working key

[rapidlocksmiths]

is what correct on fiat 500 ? lishi is deadly accurate on sip22 ive done hundreds and never had an issue , the sip22 lishi is one of easiest to use and is one of the most reliable and accurate tools , as i say ive done literally hundreds of them and never had a bad decode..

which lishi are you using , single lift tool or twin lift tool ? decode opposite direction to picked with single lift tool or same direction as picked with twin lift tool .

the location likely to have a code stamped on it is the ignition lock barrel .

[misterwasp77]

How did you remove ignition barrel on fiat 500 without a key?

[rapidlocksmiths]

you can pick the ignition to position 1 to remove it or decode it , but its not straight forward , you need to remove the dustcover/faceplate of ignition lock , insert 2 shims on left side of lock to take care of the side bar , you can then use lishi to pick the lock , when picked a few degrees remove the shims and lock will turn fully .

personally i would persevere with lishi on the door lock assuming its the same lock as the ignition .

which lishi tool are you using single lift or twin lift ?

are you getting all 8 wafers in door lock or just 7 wafers in position 2 to 8 ?

i cant see how you can go wrong with lishi on door lock decode , ive never known it miss read other than twin lift tools that have had heavy handed use damaging the pick snibs so they miss read , never known the single lift tool to miss read .

[misterwasp77]

How did you remove ignition barrel on fiat 500 without a key?

[misterwasp77]

Im using a twin lift. I cant get door lock to bite any of the even numbers now only the odd. The ignition when i tried that was all springy none would bite
All 8 are springing back on the door lock when i put in and apply no tension at all

[rapidlocksmiths]

you wont get any binding wafers in the ignition until you remove facecap of the ignition lock and take care of the side bar with 2 shims first , the side bar prevents you binding the wafers until dealt with .

when you say you cant get any of the even numbers to bite i assume you mean all are springy , once you have picked the odd positions that are binding on the odd side then the even side should bind until picked , if not increase tension to see if this changes things.

if you mean you cant feel the wafers at all on the even numbered positions then it sounds like you have worn or damaged the snib on that pick arm .

try inserting tool other way up , any difference or can you now feel even positions and not odd positions now ? if so it sounds like damaged pick snibs on one of the lift arms .

i prefer the single lift tool as you can use alot more tension and it doesnt wear or break as easily as the twin lifts do if heavy handed.

cant be anything else , either damaged tool or your not using enough tension.

you could use a tension wrench and hand pick to hand pick the door lock , you could also make an overlifter to turn door lock to open position , spike it and then try decode with your tool , you could also cut every position to highest cut and impression the lock.

you could get a local auto locksmith to come and pick and decode the lock for you or sub the job out to them . or you can purchase the key code if the original ignition still or buy a single lift tool to do the job .

[misterwasp77]

When i turn tool upside down its the same. The tool doesnt look damaged. It feels like its the lock im happy to purchase the key code but need ignition barrel out yo get the code and no way of doing that without the key

[musti418]

When i turn tool upside down its the same. The tool doesnt look damaged. It feels like its the lock im happy to purchase the key code but need ignition barrel out yo get the code and no way of doing that without the key
hi try to remove the door lock. read the wafers. Do not prolong the work.

[rapidlocksmiths]

if the wafers are all felt when no tension , then has to be either issue with tool or the keyway and plug are badly worn and the tool is turning under tension and comming out of position , if case then try inserting tool then a shim to hold pick square in correct position when tensioning.

[misterwasp77]

Removed the door lock already. Ive never stripped a lock down before to remove wafers. Is it able to be reassmebledor do i have to order a new lock housing as im guessing the pins have to be drilled out.

[rapidlocksmiths]

i have already told you how to pick the ignition , so you can decode it or remove it , a member here also posted this video showing exactly how to do this amazing what can be found when you search the forum https://www.youtube.com/watch?v=S5eY7rMSvy4&list=UUDO7-J1zugqgz0uanT0yzhg

[key mechanic]

892435mazda 3 2008,code. driver's door, on the larva. the lock can not be removed.

[JHDSoft]

hi all

i need help vw Caddy 2016 all key lost

Is there someone who can show me where to find the key cut code.

i don't have lishi

thank you in advanced

[rapidlocksmiths]

no key cut codes stamped anywhere on vag group , so you really do need that lishi tool if you want to get the key cuts.

[JHDSoft]

no key cut codes stamped anywhere on vag group , so you really do need that lishi tool if you want to get the key cuts.

Even in the eeprom immo or ecu ?

[rapidlocksmiths]

not even in the eeprom , immo and ecu , you will need lishi or a very friendly dealer to provide key cut code

[fred77]

Even in the eeprom immo or ecu ?


Call an auto-locksmith

[rapidlocksmiths]

Call an auto-locksmith

now that is sound advice

[skilion290]

Hi can folks can anyone help me generate the last two digits for this 2012 nissan versa 3 1 2 1 2 4 4 2 _ _. Thanks

Sent from my SM-A125F using Tapatalk

[skilion290]

Sry this re from driver door lock.

Sent from my SM-A125F using Tapatalk

[rapidlocksmiths]

Ok , if these are the cuts from the drivers door lock then they are positions 3 to 10 and not 1 to 8 , so you need the 1st 2 cuts and not the last 2 cuts .

if the cuts in positions 3 to 10 are ??31212442 then its narrows down to 1 of 3 keys and will be either

1231212442
2331212442
3231212442

so cut with 12 in first 2 positions , if no joy then cut same blade 23 in first 2 positions , if no joy then use new blade and cut 3231212442

[skilion290]

First ten bitting worked perfect,and I got to learn something new.thanks very much.

Sent from my SM-A125F using Tapatalk

[rapidlocksmiths]

no problem , glad it worked out

[Tbagg]

Any idea for peugot and Citroën key code localisation ?

[rapidlocksmiths]

yes , it can be found in 3 ways

1) by using the correct lishi pick to pick and decode the lock

2) by removing the lock , stripping it down and reading the wafers

3) by purchasing the key code from the main dealer