how to file in carprog ??? please !!!!

[andrey]

hello every one . would you please tell me how to open this file in carprog? 329522

329523

[andrey]

ok i upload 2 file just to see. 77960 is no problem!
the one i have problem with is 25320. carprog don't see this file .
is there any converter ? or is it possible to save this file in ultracompare? i can open it in ultracompare no problem but
problem is to upload it to carprog . thanks in advance

[sawatdee0999]

This file looks like it read correctly.. You must clean the pins on the chip if your reading it on board. make sure your pin 1 is located correctly by the programmer. Then your carporg will detect it. but in conversion there all bin file.

[andrey]

thanks. i am talking about the dump. not reading problem

[beniopyt]

is it a good quality clone?

[andrey]

it's original.
i need to convert this file to bin file i think

[sawatdee0999]

convert? just type orignal.bin on the file itself after your save. -----> example type ( .bin ) beside the name itself and it will change to bin.

[martij976]

it's original.
i need to convert this file to bin file i think

Maybe try unzip (unrar) from archive... ?

[andrey]

Maybe try unzip (unrar) from archive... ?

yeh. it's unziped . here is some example , i have 2 files (2 srs dumps ) from here . then i click open file on carprog
select the folder with this 2 srs dumps and there is only 1 file . i went to this files property and it shows 1 is bin file
and 2nd is just file .

[sawatdee0999]

this seem simple. upload the file and i'll convert it for you.

[amlgarA]

JUST change name of file example 77960-sda-c211-m1 honda accord crash.bin ....> .bin <.... but if unzipped open it with WINRAR, and then click extract to , EXPAMPLE in descktop, or create another folder etc

[martij976]

yeh. it's unziped . here is some example , i have 2 files (2 srs dumps ) from here . then i click open file on carprog
select the folder with this 2 srs dumps and there is only 1 file . i went to this files property and it shows 1 is bin file
and 2nd is just file .
Files on this site are always uploaded in archive (.zip, .rar ...) for saving space on the servers. Best thing is to get the program which can work with most of them... I'm using 7zip..... After downloading the file u need to unpack it from the archive and save in desired folder. Than u can open it in CP (carprog) as an .bin file. Have seen also files in .zip after .rar (or opposite).... Hope that help.

[andrey]

don't work. would you please try to unzip / convert to bin then post it back ?

[HeXor]

No that will not work at all, files on server have to be in zip file...you need to learn how to use a zip program my friend.

[sawatdee0999]

right click on the file and click send to compressed zipped folder then upload it here. his file that he has here is already in .bin carprog should of see it.

[andrey]

77960 is ok!.
25320 is not ok.
yes i know how to zip unzip or compress ... 2 files is unzipped / unpacked