Mercedes A-Classe inlet port shut off the engine please help

[seba_m_]

Please remove error 2513 - Inlet port shut off the engine so that disconect plug from Mercedes A-Class - ECU edc16c32 180cdi. The attached flash is off the DPF by ATR.

[gitko]

here it is removed 2513

[seba_m_]

I can disconnect the plug so that it was not safe mode?

[gitko]

mate I removed desired from you dtc

[seba_m_]

did not work. whether connected or disconnected continues to be the same mistake in 2513


Make: Mercedes
Model: 169.008 - A 200 CDI Sedan
Year:
VIN:
Test Time: 2015-11-07 20:26:33
Diagnostic path: System Selection > 169-A Class(Up to 11/2005) > Sedan > Diesel engine > Left-hand
steering > 169.008 - A 200 CDI Sedan > Control units > Drive > ECM - Engine Control Module(CDI)
Diagnostic Result
2513-1 Check component M55(Inlet port shutoff motor).Positioner
signals fault X.

[mihaiservice]

Hi
for such car it need to disable M55 actuator also to disable dtc label from flash file !

[seba_m_]

This will help anyone because I already have enough of that car.

[gitko]

Is not removed because you need to read this ecu on a bench.
And only with dtc off you can not have decision with your M55.

[seba_m_]

flash BDM. After disconnecting the plug is now error 2530-4 and shines a light on the board.

[blazej1200]

2513 dtc off
Regards

[Johnner]

Blaze,please post that again in English


Thank you...

[CustomCars]

"Dtc 2530 off

regards"

haha

[seba_m_]

Problem solved. Do not just turn off only the errors DTC :)