Immo SIEMENS DME MS42

[Stijnvdw]

Hi,

Need immo + egr delete

SIEMENS DME MS42 5WK9037 Index 04 700 255 M52 EWS 3

EWS-DME Sync code = 9F46

397600

Thanks in advance

[Stijnvdw]

Could someone help me out please?

Did i get the wrong file from DME ( downloaded the bin file with BMW Scanner 1.4.0 file size = 512kb)

I have tried to get 29F400 in boot mode by grounding pin 104 for 6sec when power is switched on.
When i did a read with galletto the file still was 32kb.
397767

Thanks in advance

[AutoExe3219]

you choice "AUDI VW ME 7.x.x 29F400BB BOOT PIN 24 FLASH A MAS" to read the file in bootmode.
The file was 512Kb.

[kiszka]

..............

[Stijnvdw]

Thanks

So if i understand correctly, i need to locate pin 24 on flash 29f400 and ground it foor 6 sec on power on.
Then select audi/vw file in gellatto to read flash? If i wan to write to the flash i must do the same?

[Stijnvdw]

Hi,

I think it worked :burnout:

398089

Is this the correct file?

Thanks!

[Stijnvdw]

Could someone do immo off please?
Thanks

[AutoExe3219]

Here you go

[Stijnvdw]

I will let you know if it works

I really apreciate it!

Thanks alot

[Stijnvdw]

Hi,

I tried to download the file with galletto, but when i gets @ 3% it stops an gives an error. (the voltage is 13.7V)
Could it be that the software doesn't erase the flash memory? (when i do a read i still have the ori file on it )

Did some research in the datasheet but couldn't find anything to erase the memory by grounding a pin or something.

Do i need another programmer to erase memory?

this is what i have bought already:

-MPPS
-GALLETTO
-k-DCAN
-ELM327
-KWP2000Plus
-Ordered AK-90 programmer
and a friend of mine has a programmer for the removeable ecu's in the earlier bosch dme's


Thanks

[AutoExe3219]

use K-CAN and download JMGarageFlasher to read/write 512KB in bootmode.

[Stijnvdw]

Thanks!!!!
Will let you know when tested on the car

[Stijnvdw]

Hi,

I tried the dme in the car but it doesn't start with the file you gave me AutoExe3219.
Any idea ?

Car cranks but no spark.

Thanks

[Stijnvdw]

Hi,

Found a program named IMMO Universal Decoding 3.2. on remapcar.com
Is this worth buying?

Thanks

[Pyromaniak]

Hi,

Found a program named IMMO Universal Decoding 3.2. on remapcar.com
Is this worth buying?

Thanks

tri it, this is from this program :) but only immo

[Stijnvdw]

Hi,

I bought the program and ddid a repair on the original file and compared it with your file and it matches.
Will let you know if it works

[ecufix]

Pyromaniak,Thanks for not password protecting this file enabling testing to be with it unfortunately does not work,I have a car in the workshop with a k line problem so I tested your dump, thanks ,regards