RANGE ROVER P38 IMMO OFF

[makura]

Hi guys

I need help with a range rover P38 showing engine disabled on the desh.
I have attached dump from the BeCM and ecu.

[Tedum]

It is better to read eka code from your becm dump and enter ir with the driver door

[makura]

EKA code which is?
Did a bit of research and the position were the EKA should be located only has FF FF.

[smokey08]

You file looks ok but data is missing or corrupt. Where EKA normally is: FFFF. Also where engine ecu sync code: 65535 (FFFF) Last 6 of vin also looks corrupt.

[makura]

You file looks ok but data is missing or corrupt. Where EKA normally is: FFFF. Also where engine ecu sync code: 65535 (FFFF) Last 6 of vin also looks corrupt.
Can it be fixed m8?I would appreciate the help.

[smokey08]

The fobcode looks intact, We could write in any EKA code. Have you got any tools to reset the immo sync code in the engine ecu? I dont know how to find it in the eeprom.
What is the last 6 of the VIN ??9130 I assume the remote is not working.

[makura]

No tools to reset ecu m8,all being done by dump would be ideal.

[smokey08]

Which ecu is it? Gems?

[makura]

Yes its a Gems,3 plugs.

[smokey08]

I think you should try writing a new EKA code in the becm then try entering it in the doorlock.

Hopefully someone has previously changed the sync code in the becm to FFFF then perfomed a immo relearn in the engine ecu.

[makura]

is it possible to use a set of dona dumps from another car?

[Tedum]

is it possible to use a set of dona dumps from another car?

Yes you can i will try to post here for you

[Tedum]

http://www.digital-kaos.co.uk/forums/showthread.php/452537-RANGE-ROVER-p38-EKA-code-from-dump-becm

use his dump of hc11

[makura]

Hi
Will just the bcm dump work with out a paired ecu dump m8?
I understand the bcm and ecu are in sync, then how will this dump with different sync code work with my ecu?

[Tedum]

http://m.ebay.com/itm/BeCM-Sync-Mate-Range-Rover-P38-Immobiliser-Gems-ECU-/370414481606 chek this out

[smokey08]

If you can find paired dumps the we could write your VIN, mileage and fob code into them.

[Cdoc]

hi
can you help
thanks fab
http://www.digital-kaos.co.uk/forums/showthread.php/452537-RANGE-ROVER-p38-EKA-code-from-dump-becm?p=2907092#post2907092