Renault Megane 2 Power Stering help/reading DF002+DF035+C1605

[soxten]

I have a powersteering as having fault
DF002 (C1608)
DF035 (C1606)
C1605

Is this Eeprom fault or is it hardware fault in steering column?

I cant see 24C16 on top side of pcb... So is it possible to read by pin connector and any tool?
Or do I need to desolder all joints and take away pcb to read 24C16?


Renault
8200246631B
TRW
50300374

http://uploads.tapatalk-cdn.com/20161009/eb66ad7a607dbd437b7d91a66d66c6cb.jpg

http://uploads.tapatalk-cdn.com/20161009/4815e7e9c6fd07192241f8a52b025a0c.jpg

http://uploads.tapatalk-cdn.com/20161009/6738e3eea5cdd6de90a5538f017caff4.jpg

http://uploads.tapatalk-cdn.com/20161009/2c730fdaf958b9d445f57e1ff85b981c.jpg

http://uploads.tapatalk-cdn.com/20161009/98114d61188ec9756c42eb4d2365fdff.jpg




Skickat fr?n min iPhone med Tapatalk

[soxten]

Here is file 24C16

[soxten]

Hope that someone can help me

Here is pinout for reading 24C16 bu UUSP-S + pinout for Eeprom 24C16

[Kellerek]

I would do it like this
402689

[soxten]

Ah virgin file :)
Does it need to program by clip or does it work/coded when ignition goes on?


Skickat fr?n min iPhone med Tapatalk

[soxten]

Need help, I have now fault DF054 and DF055 after programing on OEM workshop.

[soxten]

Please any as have info about this fault codes?

[lion0304]

You need check all Mosfet and rework solder joints. DF002 can be hardware problem and next corrup the dump.

You can try my repair dump here

406176






No THANKS, no HELP!!!

[Frankcar]

this problem some times for data ST10 mcu
with clip can't program , only have config

[soxten]

this problem some times for data ST10 mcu
with clip can't program , only have config

How do I fix this?


Skickat fr?n min iPhone med Tapatalk

[Frankcar]

you can read dump ST10 with xprog and post here
i try to checking dump

[soxten]

I have a nother used part here now.
I try to write virgin eeprom and reprogram by clip and hope it work!

[soxten]

Do I need to write virgin file if both have same part number?
There is no immo in power steering?
Does it work to mount a used directly in car?

Immo only in steering lock or?

[shadow12]

Immo only in steering lock, not in column

[dadal]

Hi Soxten, Mate how did you solved your problem ?

I need this info too
Does it work to mount a used directly in car?

immo is only in steering lock ,,so why need we then virgin dumps ?? it is just for fault codes or powerstering is paired to VIN nummer each different cars ?

[soxten]

Hi Soxten, Mate how did you solved your problem ?

I did mount a used one, no problem and it work perfekt directly on car


Skickat fr?n min iPhone med Tapatalk

[dadal]

thanks mate,, this important info for me,,, so,.I do not need to program or to make virgin or to adapt ,,,I can directly 2nd hands power steering mount in car

hmmm then editing of dump is indeed necessary just when there are fault codes .
thanks again mate

[bobbik]

FUnny, always when i'm trying to figure out complicated problem here, on DK, i am finding Soxten

[soxten]

FUnny, always when i'm trying to figure out complicated problem here, on DK, i am finding Soxten

[emoji23][emoji23][emoji23] I am working on many strange things :)


Skickat fr?n min iPhone med Tapatalk

[jcruizv]

Hi, I from CHILE, i have a megane steering with 1 trabnsistor mosfett BAD, i change. and don't run. You have a 24c16 code for a good steering?.. I download files, don't have pasword for unzip. You can help me? Tanks.

[OllieTuning1]

pasword pleass

[Esar]

So, is it the steering column or the lock that needs coding?

[phorawa]

[QUOTE = OllieTuning1; 3233881] pasword pleass [/ QUOTE]

Is correct password ? But I try extract any hace comunication"wrong password"

[geniso]

You need check all Mosfet and rework solder joints. DF002 can be hardware problem and next corrup the dump.

You can try my repair dump here

406176






No THANKS, no HELP!!!

Hi, thank you very much! i need the password please!!
Thanks!

[AutoElectronicaFS]

you can read dump ST10 with xprog and post here
i try to checking dump

Hi, i have Megane 2 with DF054 and DF002 dtc codes in power steering, it can be solve by repairing dumps / hardware, or need to change with a second hand part?.

Thanks for help.

[AutoElectronicaFS]

Here is file 24C16

Power Steering have diagnosis and i check all fuses OK. Thanks.

[Presider]

Hi. I have df035 error on my megane 2 EPS. I want to try download fresh dump to the Eeprom. Who solved the same problem such way?

[Radzio918]

I have a problem with the power steering, I have error c1606 and c1608. Can someone make me a virgin from the original file?

best regards

[Presider]

Give me please origin or repaired 24c16 dump. Thanks.

[kurajber]

Hi, my friend. I had problems with the steering wheel of the Megane 2, but the dump does not solve the problem of errors DF002 and DF035 because if the error is active it will again be entered in the eeprom and will block the steering wheel. I was able to reset the error with the Delphy 150 diagnostics, after I soldered the fets and the connector I soldered to get to the eeprom. I assembled the steering wheel and reset the errors and it worked, to our regret after a month the error occurred again, and so more and more often. Since I have another steering wheel I put it on and now everything is fine. I disassembled everything twice.So you need to fix the fault first and then reset the errors with the diagnostic device, and if the fault is fixed, everything should work properly and continue to work.

[geocity]

Hi, my friend. I had problems with the steering wheel of the Megane 2, but the dump does not solve the problem of errors DF002 and DF035 because if the error is active it will again be entered in the eeprom and will block the steering wheel. I was able to reset the error with the Delphy 150 diagnostics, after I soldered the fets and the connector I soldered to get to the eeprom. I assembled the steering wheel and reset the errors and it worked, to our regret after a month the error occurred again, and so more and more often. Since I have another steering wheel I put it on and now everything is fine. I disassembled everything twice.So you need to fix the fault first and then reset the errors with the diagnostic device, and if the fault is fixed, everything should work properly and continue to work.

Here is my solution, attached
WBR

[ivandr1987]

Hola! soy nuevo en el foro. quisiera saber si resolvieron el problema reemplazando el archivo de la memoria de la caja de direccion luego de haber reparado el hardware. tengo el mismo problema, he reparado el hardware pero no cargue el dump en la memoria, la caja funciona a veces hasta que da error dos o tres veces seguidas y deja de funcionar. saludos! gracias!

[federicosantos2]

Muy bueno el tema, me lleve un archivo para probar

[Hunter1206]

Muy bueno el tema, me lleve un archivo para probar
Hello, did you understand the structure of the dump? Tell me the area in which the crash is recorded. Thanks

[anarvaezing]

I would do it like this
402689


PASS PLEASE

[anarvaezing]

pass please

[Abdel0762781]

hello i want change the dae megane 2 I just need to config VIN with renolink

[SM PERFORMANCE]

HOLA, how do i get the password?

[SM PERFORMANCE]

hello, how do i get the password?

[vetal1504]

pasword pleass

[marcelo boesing]

Qual a senha para do arquiv o

[Fec001]

Please repair DF002 and DF035 in this dump. I repair dry solder joints too. If possible, wihtout needed of CAN Clip

[Hunter1206]

Please? sen mee password. Thanks

[cleiwil]

pass please

[marco16]

FRIEND FILE KEY

[Renhelp]

PASSWORD PLEASE

[cleiwil]

need pass please... thanks

[stillinformatic]

Hello Friends, Password please






Não, OBRIGADO, sem AJUDA!!![/QUOTE]

[stillinformatic]

Password for rar please

[stillinformatic]

Olá, estava com problemas de senha no RAR, resolvi com o Advanced RAR Repair

Link para download
https://www.mediafire.com/download/bierub2vfjh1t53/Advanced+RAR+Repair+v1.2.rar

[Konrad1991]

Cześć przyjaciele,
proszę o hasło do rar