VAG K + CAN COMMANDER V2. 5

[mafioso3]

Diagnostic via CAN and Special functions via K-line.
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
Manual definition of running diagnostic session ????C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
Broadcast diagnostic request ????C disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.
Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
Most of popular diagnostic requests ????C identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
Special function - odometer correction in instrument clusters and EDC15x.
Special function - read Security Access Code/Login WFS.
Special function - read/program immobilizer data.
Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
Special function - VAG MMI TV Activation.
Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.
Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN.
Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
Special function - Crash data clear in airbag units
List of vehicles covered from function odometer change via OBDII:

Audi Q7 (CAN)
Audi A2 (K)
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII)
Audi A6 VDO (K)
Audi A6 (CAN)
Audi Allroud (K) up to 2004
Audi A8 (K) VDO93xx
Audi A8 (CAN) up to 2007 !!!
Audi TT (K)
Seat Alhambra (K)
Seat Altea (CAN)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia (K)
Skoda Octavia II (CAN)
Skoda Superb (K)
Skoda Roomster (K)
Skoda Scout (CAN)
Skoda Fabia (K)
VW Bora (K)
VW Beetle (K)
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Golf5 VISETEON
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5/B6 (K+CAN)
VW Polo VDO/Motometer (K)
VW Sharan (K)
VW T4/T5 VDO (K)
VW Touaran VDO (CAN)
List of vehicles covered from function security access code/login reading via OBDII:

Audi A2
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO (K)
Audi A4 BOSCH (K) up to 2001
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 2001
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ petrol
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Phaeton petrol
VW Touareg petrol
VW Touaran VDO (CAN)
PORSCHE Cayenne (CAN/K)

[gomarota]

Its compatible with my chinese clone commander 1.4?

Thanks

[wyz1056]

you have this interface,for crack?

[roby]

Maybe its not compactible with chinese interface because asks for initdog dongle.

[fred83]

c'esxcellent ce soft

[Liteace]

[quote=mafioso3;286250]Diagnostic via CAN and Special functions via K-line.
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
Manual definition of running diagnostic session ????C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
Broadcast diagnostic request ????C disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.
Allows managing of brand new units (and im*obilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
Most of popular diagnostic requests ????C identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
Special function - odometer correction in instrument clusters and EDC15x.
Special function - read Security Access Code/Login WFS.
Special function - read/program im*obilizer data.
Special function - read/write EEPROM from instrument cluster/im*obilizer. All supported clusters CAN/K.
Special function - VAG MMI TV Activation.
Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.
Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN.
Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
Special function - Crash data clear in airbag units
List of vehicles covered from function odometer change via OBDII:



Hi Thanks for that, what is the best interface to use with this software ?

[grezacediagnostics]

link
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1424&sortsid=3502&sorts)
thats v3.0 ebay have v2.5
V3.0 software is there also

[Liteace]

link
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1424&sortsid=3502&sorts)
thats v3.0 ebay have v2.5
V3.0 software is there also

So you have tried the China V3.0 with this software ??

Thanks
Steve

[grezacediagnostics]

I have dongle and software from them never tried it yet as got loads of stuff . Just need car and the time. why not download software from link i gave you and have a look pal.

Dont be like Ray say thanks

you need v3.0 interface, for v3.0 software its all on that link

[Liteace]

I have dongle and software from them never tried it yet as got loads of stuff . Just need car and the time. why not download software from link i gave you and have a look pal.

Dont be like Ray say thanks

you need v3.0 interface, for v3.0 software its all on that link

WTF's Ray ??????????????????

[grezacediagnostics]

From the autodata finally thread the one who smirnoff got peeeed off with

[phenom]

it support VW POLO 1.4 2003?

[Jack Jumpin]

Hi

I have a 1.4 cable which also has the usb dongle.

Do you think this would work 2.5 or 3 ??

Thanks

[adygopo]

hy! everyone .how are you?

[sukkamotton]

hi there what tool will help me with 08 jetta . i need immo code to reprogram new key.

[ULYSSE77731]

j'ai une interface clone a l'occasion je testerai ce logiciel.merci et je vous dirai s"il fonctionne???????,,

[fjpc]

Sorry but of the many non original cables in the net, what dongle do i have to buy to correct my odometer in an audi allroad ecu KOMBI+WEGFAHRS VDO D07 audi allroad, please help for a newbie and where to receive it??

Thanks in advance

[Barrygti]

I got cable from China, will try and install this software and see if it works ok.

[kasodj]

Thank you very much!!!!

[gixxer]

Hello

How to change odometer Audi A4 2000 year M73 instrument for k+can?

Thanks

[melonenic]

Thanks a lot!

[amido007]

thx for this........

[GimaM]

So, any one tested this with chine clone?

[ogo777]

yep
confirm, work with blue china vag com cable
very cheap interface
:top:
btw
in device manager interface must be on 4 com port

[ph0en1x]

I'm using black box vag and soft is working...

Cheers

[randomlog]

yep
confirm, work with blue china vag com cable
very cheap interface
:top:
btw
in device manager interface must be on 4 com port


Work OK with chinesse clone.

Anybody check version 5.1 and 5.5 ? (can bus)

[ph0en1x]

Work OK with chinesse clone.

Anybody check version 5.1 and 5.5 ? (can bus)

I think that only vag can work with 5.1 and 5.5 not vag k+can.
But it will bi nice if someone check that.

Cheers

[randomlog]

version 5.5 work ok for Kline with the same drivers of 1.4 and cable.

i cant teste can bus protocol.

[randomlog]

i cant read dashboard for my A4 B6 2004 rb4 with this tool.

[d2mike]

version 5.5 work ok for Kline with the same drivers of 1.4 and cable.

i cant teste can bus protocol.

So, interface which works with 1.4 version, also works with 5.5?

[randomlog]

yes. for kline cars i tested.

NOTE: i get my dashboard bin with vag k cmd 1.4 ;)

[d2mike]

yes. for kline cars i tested.

NOTE: i get my dashboard bin with vag k cmd 1.4 ;)

Nice. Thanks.
Can you upload your VAG K+Can Commander version? Would be very nice ;)

... and IMHO it's very very dangerous to play with VAG K+Can 1.4 on RBx dashboards. Believe me, I have always to repair these dashes with DEF, Error and so on. Therefore be careful ;)

[randomlog]

Nice. Thanks.
Can you upload your VAG K+Can Commander version? Would be very nice ;)

... and IMHO it's very very dangerous to play with VAG K+Can 1.4 on RBx dashboards. Believe me, I have always to repair these dashes with DEF, Error and so on. Therefore be careful ;)

here you have

http://www.digital-kaos.co.uk/forums/f174/vag-can-commander-5-0-full-239664/#post1526268

About dump from dashboard, do you recommend me, no touch that dump?.

Im waiting for: super tacho 2.0 / super vag 4.8 / tacho universal 2008 tools

[d2mike]

here you have

http://www.digital-kaos.co.uk/forums/f174/vag-can-commander-5-0-full-239664/#post1526268

About dump from dashboard, do you recommend me, no touch that dump?.

Im waiting for: super tacho 2.0 / super vag 4.8 / tacho universal 2008 tools

You are the best. Thank you mate!
I would not work with vag k+can on RBx ;) search the forum, there are many users who had problems after playing around with this crapy tool ;)

[d2mike]

yes. for kline cars i tested.

NOTE: i get my dashboard bin with vag k cmd 1.4 ;)

What connection type are you choosing?
There is no k-line record.

ISO9141?

[gjuzel]

hi .I try dashboard golf4 2000year motometer [mmo] with VAG K + CAN COMMANDER V2. 5 is ok.change km in dashboard...motometer{boo} I cant change km in dashboard these dashboard {BOO}what is diferent with 2 dashboard boo and mmo .I see eeprom 24c02 in 2 dashboard.sory for my bad english..

[admiralx]

hello m8, I have a little porblem, I want to try a 5.5 VAG CAN galleto cable, some of you can work with this cable:ciao:

[ider38]

hi all friends it support VW touareg 2010

[Maartinj]

hi all friends it support VW touareg 2010

you asking or you confirming ?

[mikilovitch]

hi .I try dashboard golf4 2000year motometer [mmo] with VAG K + CAN COMMANDER V2. 5 is ok.change km in dashboard...motometer{boo} I cant change km in dashboard these dashboard {BOO}what is diferent with 2 dashboard boo and mmo .I see eeprom 24c02 in 2 dashboard.sory for my bad english..

Hi gjuzel,

I'm facing to the same problem regarding the dashboard BOO from motomoter. The vag k+can commander 2.5 cannot read the 24C02 eeprom.

Have you find out a solution to read this kind of dasboard (BOO motometer)

thanks

[H.Wessel]

you asking or you confirming ?

is kidding xD

[kcaddy]

Hi Everyone!!

Wondering if this tool will help me with my Vw Caddy 04

Thanks

[MarcusC]

HI, I downloaded the file vag commander 2.5, when I open it up it says dog innit failed? Am i missing something? I cant seem to connect to the ecu on a audi 2.0tdi 8p. The ecu is edc 16ui. Should it be opening on com 4 or 3?

[dodo41]

I can read pin code from ecu magneti marelli iaw 4mv seat 1.6 16v 2002?

[vagarm]

Hello, friends, can you please advise if this is compatible with rosstech (VCDS) interface?

[vaicekas]

Hello, friends, can you please advise if this is compatible with rosstech (VCDS) interface?

No. Just dedicated interface or KL adapter.

[b4mz3]

Did you find any solution on this?

[b4mz3]

HI, I downloaded the file vag commander 2.5, when I open it up it says dog innit failed? Am i missing something? I cant seem to connect to the ecu on a audi 2.0tdi 8p. The ecu is edc 16ui. Should it be opening on com 4 or 3?

Did you find any solution to this?

[Tefocm]

Guys it's not possible...So lets support the brand.

[Stelaras26]

It need a usb dongle to work..Thats your prob...

[Mario6]

Here You do not need a dongle.


If I helped, find the "thanks" button.

Vag K can Commander 2.5​

[ferrarimaster]

hopefully this will work

[Mario6]

You just have to try it.

[d146]

thanks for the software

[Mario6]

You're welcome.

[markudariva]

Can't download.

[josper]

Can't download.
is this file available?

[Mario6]

The file is still available. Just download.

[josper]

thank you!

[mrvinyla]

Hi, will it work with VAG18.2 (HEX+CAN) cable?

[Mario6]

No. This soft works with vag kkl and vag k can commander 1.4 / 2.5 interfaces.

[klore681]

Will this work with the hex-can cable for vcds

[Mario6]

Will this work with the hex-can cable for vcds

No . It will not work. Although someone previously wrote that after changing the drivers for old (Ross Tech) and creating a com LPT port works. It did not work for me. It definitely works with cables:
-vag k can commander 1.4 / 2.5,
-vag kkl
and probably
-BMW Inpa K-d can

[Vaguranto]

Thanks for you.

[skoebl]

Is the file still up? I keep getting a notification that I don't have access to it :(

[Mario6]

It works all the time.

[vdubfixer]

looking forward to trying this!

[aktifland]

thank you so much

[chaosmichel]

i hope its works

[al70]

google ( maltchev )

[Swhagrup]

Thanks for sharing, I have been looking everywhere for this software

[versatile2611]

Thank you so much!

[locutusBorg]

hey everyone on thread

[6r8ph1X]

im also trying to download this and it wont let me :( Any suggestions?

Edit: I figured it out.

[Lolo4321]

What are the differences between VAG k + CAN commander vs VAG tacho ?

[coop2332]

Thanks! You are awesome!

[radutuby]

Thanks! have a nice day!

[bernardblack]

Thank you so much!

[dnnjunior]

thank you very much :)

why i can't download it?

Regards

Nick

[vanawos766]

hi there what tool will help me with 08 jetta . i need immo code to reprogram new key.
thank you for this comment

[vanawos766]

why can i not download

[vanawos766]

i introduced myself, wrote a few replies i now i need to download. activate please

[Deiselmlieage]

To everyone who is having trouble downloading, Read the Rules on the main forum page. I had the same issue and someone there helped me out by just pointing that out. Read the rules follow along and it will work.

Great post thanks

[laraiedh]

Hello
Thank you for sharing
thank you

[11majo11]

Hello
Thank you for sharing
thank you
does this software work in windows 10?

[fixikas]

Looks really good going to test it tomorrow :victorious:

[axmed92]

why cant i download every time it redirect me to the login panel?

[pedroalexrj]

Does anybody knows if this Commander v.2.5 works with VCDS cable v.18 or 19?
tks

[Mario6]

Does anybody knows if this Commander v.2.5 works with VCDS cable v.18 or 19?
tks

This SW works on cheap Vag KKL, Vag k can commander 1.4 / 2.5 and Inpa K D Can cables.

I tried VCD$ Hex-can but it didn't work.

[paro44]

Does anybody knows if this Commander v.2.5 works with VCDS cable v.18 or 19?
tks


VCDS cable has a "dumb mode" (works like kkl cable), maybe it works when you use that. Maybe you have to use other virtual comport driver, too.

[Mario6]

VCDS cable has a "dumb mode" (works like kkl cable), maybe it works when you use that. Maybe you have to use other virtual comport driver, too.

Yes. Someone wrote that you have to use old drivers (R.T. site) and then it will work like KKL with Com Port .. I tried and I failed. I have cheap KKL, Vag commander and works with them

[ramianek]

Thanks for providing.
Will it work on Win 7?

[Mario6]

Thanks for providing.
Will it work on Win 7?

Yes. It work on:
Win XP, 7 8.1. (32/64 bit)

[Dante16]

Thanks! have a nice day!

[ultegra]

Hi - is there a snag with downloading this file? I'm a newb but I am logged in and have said hello over in the newbs thread. Thanks.

[bigdan7]

anyone in GA with Audi diagnostic knowledge that is able to help with no start issue.?

[sychnose]

thanks mate great help

[assoumohamed]

thanks so much

[peterpanok]

thanks will give it a try

[jvroode]

hello,

i have a problem, i can´t download it. anybody a idea why?

thanks

jasper

[Paulogomes]

Hello
Is it possible to download this rar file?
Thak You

[Mario6]

Hello
Is it possible to download this rar file?
Thak You

Read Post # 51

[f4teh]

helo why i cant download the file

[makintr87]

bu güzel paylaşım için teşekkürler

[makintr87]

teşekkürler.. tank seni..

[opulx]

i have to post to download ?

[thomashielkema]

i have to post to download ?

yes but ive have already posted and it seems i can not download the file

[thomashielkema]

hi mario it keeps telling me im not authorised to download it and yes im able to download other files so could you maybe explain why this is happening i know its an old post but if you want to help me out that would be nice

[Mario6]

hi mario it keeps telling me im not authorised to download it and yes im able to download other files so could you maybe explain why this is happening i know its an old post but if you want to help me out that would be nice

Try here. The site is safe.

[stdstd]

Thank you so much

[srunkno0w]

i have to post to download ?

[John0ne]

Will this work on 2007 golf TDI ?

[AsterXRO]

i have to post to download ?

[kajo22]

thank you very much

[Mnaoufal]

This is very helpful.

Thanks!

[vagusergolf]

How can I get access to the rar file?

[Schmaler]

warum kann ich es nicht herunterladen? er will sich immer neu anmelden.

[Firefight3r]

Thank you! was looking for a clean version :)

[Jacaaa]

warum kann ich es nicht herunterladen? er will sich immer neu anmelden.
Kannst Dich gerne per PM melden - schicke es Dir zu, wenn es bei Dir mit dem download immernoch nich geklappt hat.

[LaCosaMia]

Kannst Dich gerne per PM melden - schicke es Dir zu, wenn es bei Dir mit dem download immernoch nich geklappt hat.

Ich bräuchte das Tool auch. Auch PM anschreiben?

[LaCosaMia]

How long does it take to activate the downloads? 15 have been around for a long time ......

[Pick509]

This thread still alive?

[sefulabani]

following the thread

[moroczmartin]

i dont get this sys

[uranus]

Getting hand of the downloads and attachments seems to be very tricky...

[joshrichhard]

Tricky indeed

[wayne18]

i need to reply to download?

[wayne18]

du hast post :)

[mpetty21]

Here You do not need a dongle.


If I helped, find the "thanks" button.

Vag K can Commander 2.5​

Looking for best Vag K Can Commander download MK4 GOLF

[Knight140]

hy! everyone

[dustgr]

thanks a lot

[iloveb5s122]

it will not let me download

[pulancur12]

Diagnostic via CAN and Special functions via K-line.
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
Manual definition of running diagnostic session ????C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
Broadcast diagnostic request ????C disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.
Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
Most of popular diagnostic requests ????C identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
Special function - odometer correction in instrument clusters and EDC15x.
Special function - read Security Access Code/Login WFS.
Special function - read/program immobilizer data.
Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
Special function - VAG MMI TV Activation.
Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.
Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN.
Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
Special function - Crash data clear in airbag units
List of vehicles covered from function odometer change via OBDII:

Audi Q7 (CAN)
Audi A2 (K)
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII)
Audi A6 VDO (K)
Audi A6 (CAN)
Audi Allroud (K) up to 2004
Audi A8 (K) VDO93xx
Audi A8 (CAN) up to 2007 !!!
Audi TT (K)
Seat Alhambra (K)
Seat Altea (CAN)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia (K)
Skoda Octavia II (CAN)
Skoda Superb (K)
Skoda Roomster (K)
Skoda Scout (CAN)
Skoda Fabia (K)
VW Bora (K)
VW Beetle (K)
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Golf5 VISETEON
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5/B6 (K+CAN)
VW Polo VDO/Motometer (K)
VW Sharan (K)
VW T4/T5 VDO (K)
VW Touaran VDO (CAN)
List of vehicles covered from function security access code/login reading via OBDII:

Audi A2
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO (K)
Audi A4 BOSCH (K) up to 2001
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 2001
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ petrol
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Phaeton petrol
VW Touareg petrol
VW Touaran VDO (CAN)
PORSCHE Cayenne (CAN/K)
thanks a lot bro

[borajord]

trying to get the software

[adiiktheking]

absolutely thankful thanks guys !!!

[iwizzowld]

thank you for the share!