Chrysler crossfire key program

[eepromRipper]

Hi guys, I will be getting a chrysler crossfire in my garage by nxt week, after comparing the dump from a chrysler immo box and I understand its similir to that of ML benz 320 with same MCU 1d69j version. i will like to confirm from the genuises on this great forum if its possible to program the key from dump using ML AAM programmer. thanks

[Meat-Head]

the word on the street is that is is simply a re-badged merc.
Not able to provide any more info

[eepromRipper]

the word on the street is that is is simply a re-badged merc.
Not able to provide any more info

with my investigations so far, you're correct. but i need to know if they use the same key system.

[GolfmkI]

chrysler crossfire is from daimler group and most pieces are MB , but I am not sure that key and inmo system could be the same, it is very posible but I am not sure.

[Meat-Head]

Sorry, you will have to pick the bones out of this lot, as i'm looking at ~~~~ on anothersite uk.

Reading between the lines remote bit looks the same, but only for 'earlier' cars.

plead dumb and ask a seller on ebay with merc key if will prog to crysler and verse vise.

:rulez:

Program and Reprogram Your Car Remote Key Fob Control Transponder - Program Your Keys Free Instructions - Home Page (http://www.programyourkeys.com/)

eBay.co.uk Guides - Mercedes Benz Key Programming Reprogramming (http://reviews.ebay.co.uk/Mercedes-Benz-Key-Programming-Reprogramming_W0QQugidZ10000000007277333)

How to program your own key. SAVE $$$ (http://www.crossfireforum.org/forum/tsbs-how-articles/17211-how-program-your-own-key-save.html)

Crossfire KEYS (http://www.crossfireforum.org/forum/crossfire-coupe/18142-crossfire-keys.html)

I cannot program my new key for my 2005 Chrysler Crossfire. - FixYa (http://www.fixya.com/cars/t2401349-cannot_program_new_key_2005_chrysler)

https://www.remotesandkeys.com/ProductDetails.asp?ProductCode=3191A

[mikeslocks]

Think dodge,chrysler group had contract with sentry still so something had to be sentry they had better security than bmw and mercadies anyway (my personal opinion.).

[eepromRipper]

got the immobilizer today, read the MCU (1d69j) content was same with that of any regular AAM with the same maskset, on the version of chrysler, they didn't use the sentry system. everything including the engine of the car is benz. Chrysler Crossfire is just a benz sport car. I will try to write the key to a blank 7935 and let u guys know the results. thanks for your contribution.

[Xram]

Top post Meat-Head if only the blade-less keys were so easy to program.

[Meat-Head]

Top post Meat-Head if only the blade-less keys were so easy to program.

Yeah sorry was looking at a ~~~~ site at that time and i'm only on here now because got out of bed to reply to another thread!

Enjoy

[sogaro]

got the im*obilizer today, read the MCU (1d69j) content was same with that of any regular AAM with the same maskset, on the version of chrysler, they didn't use the sentry system. everything including the engine of the car is benz. Chrysler Crossfire is just a benz sport car. I will try to write the key to a blank 7935 and let u guys know the results. thanks for your contribution.
Hello M8 , did it work?

[andresfn18]

HI, TANGO PROGRAMMER HAS THE OPTION TO PROGRAM CROSSFIRE KEY'S :rock: BY DUMP OF 1D69J!!!

[sogaro]

Its too expensive for me m8.

[andresfn18]

IT`S NOT TOO EXPENSIVE IF YOU USE A LOT, IT`S LIKE CARPROG, YOU BUY IT BY MODULE AND IT WORKS!!!:beer:

[sogaro]

Am about paying for ICC immo code and now am confused. can i send you dump and you program chip for me and pay for shipping and/or service?

[andresfn18]

Am about paying for ICC im*o code and now am confused. can i send you dump and you program chip for me and pay for shipping and/or service?


OK MY FRIEND I WOULD HELP YOU, SEND ME YOUR DUMP OF CROSSFIRE AND I PROGRAM THE CHIP FREE OF CHARGES, ONLY PAY THE SHIPPING AND READY!!!:rock:

[sogaro]

OK MY FRIEND I WOULD HELP YOU, SEND ME YOUR DUMP OF CROSSFIRE AND I PROGRAM THE CHIP FREE OF CHARGES, ONLY PAY THE SHIPPING AND READY!!!:rock:
Thanks for your assistance, owner not ready for payment, disregard further help,regards.

[Andrei_]

Hello. Do you have a full immo 1d69j 93c56 and motor 95p08? I have the same car, but it has problems with synchronization, I want to compare the dumps.

[abdulrauf]

HI, I HAVE 2 CROSSFIRE TO BE PROGRAM PLS CAN YOU HELP ME OUT I USED KEY MASTER HE DID NOT WORK
IF IS POSSIBLE TO PROGRAM IT FOR ME ON A CHIP I WILL SEND YOU DUMPS. WHAT WILL COST ME PLS THANKS IN ADVANCE

[abdulrauf]

HI, I DOWNLOAD CRACK UPDATE SOFTWARE FOR X431 LUNCH IN FORUM I USE IT ON MY FRIEND X431 MASTER IT WORK BUT ON MY OWN HE DID NOT WORK PLS WHAT TO DO.

MY X431 IS BLACK OLD TYPE AFTER I LOAD THIS THE MASSAGE DISPLAY DISACCORDING BETWEEN THE SOFTWARE S/N AND SMARTBOX S/N PLS DOWNLOAD AND UPGRADE AGAIN OR CONTACT LOCAL DEALER

SOLUTION PLS

THANK IN ADVANCE

[abdulrauf]

HI, PLS I HAVE 2 IMMO OF CROSSFIRE TO PROGRAMM KEY PLS CAN I SEND YOU DUMP TO PROGRAMM FOR ME CHIP AND HOW MUCH IT WILL COST ME


THANKS

[abdulrauf]

:hello:

HI, I HAVE 2 CROSSFIRE TO BE PROGRAM PLS CAN YOU HELP ME OUT I USED KEY MASTER HE DID NOT WORK
IF IS POSSIBLE TO PROGRAM IT FOR ME ON A CHIP I WILL SEND YOU DUMPS. WHAT WILL COST ME PLS THANKS IN ADVANCE

[llaverosv]

Hi
have a chrysler crossfire ,mcu 1D69J can it be programmed like MB ML 320 ?
thanks

[eepromRipper]

Hi
have a chrysler crossfire ,mcu 1D69J can it be programmed like MB ML 320 ?
thanks
No it can not be programmed like that of ML, you can use Tango key programmer

[llaverosv]

Hello
have a Chrysler Crossfire to program a key.
owner lost key 4 years ago !!
I read 1D69J mcu with Xprog-m , but before try with UPA.

it seems that file is corrupted since Tango doesnt recognize it.
have a dumpfile from other crossfire it looks quite different.

need help to program a ney key
thanks
llaverosv

[Bazil_mb]

Hello
Crysler crossfire it's de same platform like SLK (not ML)
Connect Star Diagnosis, choose SLK 320, and find interesting things

[llaverosv]

i GONNA CHECK IT !!!
thanks

[dilick]

i GONNA CHECK IT !!!
thanks
i got an idea brother but, you need to post ecu, immo dumps it should be pair.

[sukkamotton]

hello when you order key from dealer is so simple to program . insert key and put switch in to run position dont crank push lock or unlock button twice wait 30 seconds and is programmed . now i programmed 2 key this way . ordered from dealer i dont know from ebay or other places.

[duplikeytor]

got the immobilizer today, read the MCU (1d69j) content was same with that of any regular AAM with the same maskset, on the version of chrysler, they didn't use the sentry system. everything including the engine of the car is benz. Chrysler Crossfire is just a benz sport car. I will try to write the key to a blank 7935 and let u guys know the results. thanks for your contribution.

Did

you read it incircuit or out of circuit?

[softelat]

Hello,
i have Crysler Crossfire with synchronization problem, can anyone help me with immo and eep motor dumps?

[joker01]

hello ... say that buying from here programming pcf with vvdi2 then I can program the remote part with manual procedure ??
I think that the ignition part and the remote part are not programmed together being pcf7935 ...
tomorrow I will try to hear the cost from the original dealer even if I think that by doing so the ignition will already be programmed but the keys must still be programmed manually .....