mg_cfg

**mrblue** · 2nd September, 2012, 06:34 PM

I have two mg_cfg files here, Im not sure what one to use on my vu solo clone.

I was getting freezing picture last night but pretty sure its the cfg file as all else is good..

Running mgcamd 1.38

Ive added the .txt so i can upload...

**digicon** · 3rd September, 2012, 01:57 AM

I have edited for you and re-upped try that one, just a side not get a hold of Notepad++ to edit files such as these a lot easier and its free.

**mrblue** · 3rd September, 2012, 04:54 AM

Is this good for both the solo and dm500s. I should only have to change the B 06 to B 02

**digicon** · 3rd September, 2012, 07:58 AM

Originally Posted by mrblue

Is this good for both the solo and dm500s. I should only have to change the B 06 to B 02

Yes will work on both

**mrblue** · 6th September, 2012, 08:52 PM

Big improvement, not completely freezing, but still some pixelation and glitching, just slightly.

And also I have to restart mgcamd on the dm500s frequently, not sure why this is.???

**mdt** · 6th September, 2012, 09:31 PM

Originally Posted by mrblue

Big improvement, not completely freezing, but still some pixelation and glitching, just slightly.

And also I have to restart mgcamd on the dm500s frequently, not sure why this is.???

have you set it up in auto-cam?? if mgcamd is glitching its probably down to your provider although it could be broadband connection/signal level but odds are its your share. regards mdt

**mrblue** · 7th September, 2012, 07:50 PM

It came highly recommended by a guy who I know well and his runs perfect.

Yep, mgcamd is default cam, 1.38. Im going to switch to cccam 2.1.3 to see if that makes a difference as that was what I had running on my last share...

**mrblue** · 8th September, 2012, 05:40 PM

Ok I have been running VIX 2.4 143 on my vu solo clone and have tried mgcamd 1.35a, 1.38, cccam 2.1.3, 2.1.4, 2.2.0 and 2.2.1.

All glitching.

Share said dont use vix, black hole is better, mgcamd still glitching but cccam 2.1.4 has been running perfect the past couple of hours.

So can anyone make sense of this, why black hole is better for this share when my last share was perfectly fine with vix...

**mdt** · 20th September, 2012, 06:28 PM

Originally Posted by mrblue

Ok I have been running VIX 2.4 143 on my vu solo clone and have tried mgcamd 1.35a, 1.38, cccam 2.1.3, 2.1.4, 2.2.0 and 2.2.1.

All glitching.

Share said dont use vix, black hole is better, mgcamd still glitching but cccam 2.1.4 has been running perfect the past couple of hours.

So can anyone make sense of this, why black hole is better for this share when my last share was perfectly fine with vix...

ive tested mgcamd 1.35a and 1.38 on my uno running b.h 1.7.2,3 ect ect and its flawless using a n-line from my own and external sources and never had any trouble... ghosts in the machine,maybe?? try a fresh install and use this version of mgcamd 1.38 through the bh installer and see if it helps,regards mdt