VAG-COM/VCDS EVERYTHING

[rivit]

ok, order of flashing does matter?

i searched for 18.2.0 AKP (polish), but without results. Is there only english version (for now)?

What about internet connection during test/scan?

loader from v6.1 is for 17.1.3 or it will be working with 18.2.0 too?

[Slawusss15]

Hi, can you help me?
1. Car: Golf VI R
2. Year 2010
3. VIN :WVWZZZ1KZBW075949
4. Left hand drive
5. Engine type: 2.0 TSI 199KW
6. Allwheeldrive, automat gearbox
7. ABS pump is mk60ec1: 1K0 907 379 AT
8. Disc diameter front 345, back 310
9. no start stop
10.has asr-eps button off
11.NO HILL HOLD
12.has TMPS

[kaalis]

Do you "know" what you want to know?

[Mario6]

ok, order of flashing does matter?

i searched for 18.2.0 AKP (polish), but without results. Is there only english version (for now)?

What about internet connection during test/scan?

loader from v6.1 is for 17.1.3 or it will be working with 18.2.0 too?

Hi.
The latest Polish version is 17.8.1. Works with Kolimers V 6.1.

[hid3]

Do you "know" what you want to know?

LOL He is my friend, he was seeking me accross and along

[rivit]

order of flashing files (ftdi + atmega hex + eeprom) does matter?

What about internet connection during test/scan? Can i browse internet while scanning?

[alexm1]

My way:
ftdi
Atmega :flash and eeprom

Trimis de pe al meu Redmi Note 4 folosind Tapatalk

[Ribenaberry]

Hoping someone can help, (My first post!)

I recently got the below cable and when I plugged it in and hit the test on 17.8.1 using Kolimars VCDS Loader, it already had the Unregister/Unauthorized tag in the about page. (The install was a clean install and had a blank about page before.) The test also said Interface: not found when it completed.

I then used MProg and all looked indentical there, then using the HWType program I found out that it was HW type 0x46 and FW 1.96.
When I tried to use the EEwrite program, it just said "not in bootloader mode"

My question is, is there anything I can do to save this cable? And if there is, does "not in bootloader mode" mean I need to buy a programmer to reflash it?

IMG_0702.JPGIMG_0701.JPG

Thanks in advance

R'Berry

[hid3]

It has been discussed multiple times about these interfaces.
This is what can be done with them:
-Return it to the seller and request for a refund;
-Keep it for spare parts;
-Give it as a gift for a neighbour teenager.

If you want to use Kolimer's dumps, you need a quality interface which contains ATmega162 chip. It has also been posted in the thread on where to buy such ones.

[Ribenaberry]

Just my luck!

One last question, I have another cable, (Bought it ages ago and goosed it when I let the laptop connect to the internet). Is this one suitable for use with Kolimers dumps? it looks like an atmega162.

When I run the HWType program, it wont give any feedback, but I can read the cable on MProg. It is also showing the Unregistered/Unauthorized tag in the about page, but it did work originally.

Apologies for rookie questions.

IMG_0703.JPGIMG_0705.JPG

One again, Thanks in advance.

R'Berry

[kaalis]

Yes, this looks better.

[Ribenaberry]

That's good news, so I can just connect this to a USBASP as detailed in previous pages and use the Kolimar 6.3 dumps on it? Then it should work with 17.8.1?

Does it matter that the HWType Program cant read it and give me a HW type?

[lemta]

Hoping someone can help, (My first post!)

I recently got the below cable and when I plugged it in and hit the test on 17.8.1 using Kolimars VCDS Loader, it already had the Unregister/Unauthorized tag in the about page. (The install was a clean install and had a blank about page before.) The test also said Interface: not found when it completed.

I then used MProg and all looked indentical there, then using the HWType program I found out that it was HW type 0x46 and FW 1.96.
When I tried to use the EEwrite program, it just said "not in bootloader mode"

My question is, is there anything I can do to save this cable? And if there is, does "not in bootloader mode" mean I need to buy a programmer to reflash it?

IMG_0702.JPGIMG_0701.JPG

Thanks in advance

R'Berry

I think that is a fake V2 interface, same as mine. Did it ever work with the supplied CD software? Try using it without a loader software. The one I have works with the official software but it has problems with communication at times.

[hid3]

That's good news, so I can just connect this to a USBASP as detailed in previous pages and use the Kolimar 6.3 dumps on it? Then it should work with 17.8.1?

Does it matter that the HWType Program cant read it and give me a HW type?

This interface is good quality one. It will work perfectly with Kolimer's. In order for HWType to work, the interface needs to be powered up.
Also, I guess you will be able to reflash it to Kolimer's even without the need to connect USBASP. Just power it up and use HW_Write tool. It's HW46 type.

I think that is a fake V2 interface, same as mine. Did it ever work with the supplied CD software? Try using it without a loader software. The one I have works with the official software but it has problems with communication at times.

License status doesn't mean anything. In fact, it means nothing. While it might show "everything is green" in fact the interface might (most likely will) not perform functions correctly. Ro$$ is getting smarter too

[Ribenaberry]

I just tried the first cable with the original software (on an air gapped laptop) and it has worked! So I was able to do the adaptation that I needed to do (Injector coding).

As for the first cable, Ill give the Write tool a go and see what it says and let you know.

Once again, everyone, thank you for all your help!