PDA

View Full Version : EDC17CP02 IMMO



werner1337
5th February, 2023, 12:24 PM
Hi,
I cloned the ecu with genuine k-tag. Wrote mpc and eeprom but the car doesn't crank.
Could somebody please transfer the immo data or do an immo off?

Attached mpc+eeprom from ori ecu and bought ecu.
Thanks in advance

robert1232
5th February, 2023, 12:29 PM
try this
pass pm


Hi,
I cloned the ecu with genuine k-tag. Wrote mpc and eeprom but the car doesn't crank.
Could somebody please transfer the immo data or do an immo off?

Attached mpc+eeprom from ori ecu and bought ecu.
Thanks in advance

werner1337
5th February, 2023, 03:10 PM
Solution didn't work unfortunately :-(

brend
6th February, 2023, 01:00 PM
Hi,
I cloned the ecu with genuine k-tag. Wrote mpc and eeprom but the car doesn't crank.
Could somebody please transfer the immo data or do an immo off?

Attached mpc+eeprom from ori ecu and bought ecu.
Thanks in advance


Your's eep dump from externial eeprom in here no immo information .

This tricore and for immo off or transfer immo isn need all from tricore p_flash and d_flash .

Your cloony k-tag can't read d_flash from this ecu .

And also after write buckup d_flash corrupted with cloony tool .

alonedark
6th February, 2023, 01:38 PM
you clone file

alonedark
6th February, 2023, 01:42 PM
and your inmo off ok please puss thanks

alonedark
6th February, 2023, 04:28 PM
Try the file

alonedark
7th February, 2023, 12:09 AM
you tryed the files or no, because are good

werner1337
7th February, 2023, 02:26 PM
Thank you, I will try them today.
@brend Read was done with a genuine ktag

alonedark
7th February, 2023, 11:16 PM
the files should working ok

werner1337
8th February, 2023, 09:35 PM
Car still doesnt start. Tried other immo-off files including yours, no fault but still no luck. I think there is something else wrong with the car.

alonedark
8th February, 2023, 09:57 PM
You try clone files too??? Write original eprom and flash file clone in donor Ecu

elektronik325
8th February, 2023, 10:02 PM
Car still doesnt start. Tried other immo-off files including yours, no fault but still no luck. I think there is something else wrong with the car.

Hi. Are you sure it's an immo problem? And not a damaged starter, relay, etc. Check the immo status in the parameters. If there are no DTCs, it's a bit strange

alonedark
8th February, 2023, 10:11 PM
Yes I do it inmo off in this Ecu and clone too and don’t have any problem

Bambula
13th August, 2024, 05:47 AM
Hello, can you do immo off for me too? my car won't start after ecu change