airbag crash fiat ducato 01390298080

[jkubp]

Hello, please clear crash fiat ducato 01390298080 eprom 95640. thank you

[slick_dick]

your file cleared

pass in pm

br slick

[jkubp]

I have error B0118-95 INCORRECT CONFIGURATION how to clear it

[volodin69]

I have error B0118-95 INCORRECT CONFIGURATION how to clear it

Bad selection model in crash clear program.what ecu do you have on the car?

[jkubp]

DUCATO (TYP 290) 2,3 MULTIJET
MARELLI 9DF CF6/EOBD DIESEL INJECTION(2,3)

AIRBAG TRW
01390298080
S/N:01978
93977-D219



THANK YOU

[giary74]

DUCATO (TYP 290) 2,3 MULTIJET
MARELLI 9DF CF6/EOBD DIESEL INJECTION(2,3)

AIRBAG TRW
01390298080
S/N:01978
93977-D219



THANK YOU

Here your fixed file
Test and report

[jkubp]

it's OK. thank you giary74

[marcelo boesing]

Consegue me ajudar com este código de falha tenho o arquivo da central

[giary74]

Consegue me ajudar com este código de falha tenho o arquivo da central


Only english language, please

[marcelo boesing]

Only english language, please

Can you help with this fault code I Have the central file B0118-95
IT ALWAYS GIVES YOU THIS CODE b0118-95
CENTER 0285015431
JEEP RENEGADE DIESEL 2019
CHASSIS 98861112XLK276084
ISO 001A505017

[Bartas222]

Cześć. U mnie też pojawia się błąd związany z nieprawidłową konfiguracją.
Zrobiłem Crashdata i gdy podłączyłem na stole było OK, jednak gdy jestem w aucie wyskakuje mi błąd
B0118-95 - Nieprawidłowa konfiguracja

[juniorlucival]

please, i have the same problem, airbag return b0118 fault.. Anyone can help me?

[Heymopeh]

Only english language, please

Will you be abble to help me as U.K. specialists can't, also authorized service in Bulgaria cant help with my issue.

[fuzz1]

Start by posting your file and details of your car plus details of the module

[Heymopeh]

My van is Ducato 2.3 130 multijet, 2013. Bought it with light on. Module was dead and could not connect to it. Bought second hand module same number but 2011. When plugged odometer was flashing and error "incorrect configuration" B0118-95. Send my dead module and working one to U.K. to "Trancelot ecu repairing " and they managed to transfer details from dead module to working one. After receiving the working module i plugged it. Odometer now it doesn't flash, but still same error "incorrect configuration". Whent to official dealer...took 50€ from me without fixing issue, been told stupid thing "module is defective and i need new for 600€" sure now i have working module, all live data i see is ok, i bought yellow cable to connect my Multiecuscan and did the proxy alignment procedure. I can't figure out now what to do as i'm out of ideas from where to start again.. as i spend more than 200€ and still light on as in the beginning. Only difference is that now i can go inside module read the error and see life data, ohm of driver airbag, pretensioner, atc.

Please someone give me a hands up
Sorry for late reply.
Thanks in advance to those who read my message.

[Matronix]

same issue here, B0118-95 and no soft to correct it

Chassisnummer ZFA25000002A38675
Model 295BGB401000 (4Y)
Magneti Marelli MJD 8F3.BN


Model identification DUCATO 2.3JTD 130CV E5+ FURGONE P.LUNGO 17Q
production date: 15/12/2015
Chassis 2A38675
eninge number 2501852

read eeprom 5LCA E641 = 95640

can anybody see or he/she can correct this? they built it into camper but now config error , cannot see in live data where the error might be. If the file can be corrected that would be great

[Matronix]

sorry 0 double post

[giary74]

same issue here, B0118-95 and no soft to correct it

Chassisnummer ZFA25000002A38675
Model 295BGB401000 (4Y)
Magneti Marelli MJD 8F3.BN


Model identification DUCATO 2.3JTD 130CV E5+ FURGONE P.LUNGO 17Q
production date: 15/12/2015
Chassis 2A38675
eninge number 2501852

read eeprom 5LCA E641 = 95640

can anybody see or he/she can correct this? they built it into camper but now config error , cannot see in live data where the error might be. If the file can be corrected that would be great

Hi friend,
try this solution and report feedback please.
Pass PM after Thanks + rep

[Matronix]

same error still

[ionutdanica]

Hi guys i have fiat ducato 250 2017 srs airbag problem i delete crash but i have still error this b0118-95 configuration mismatch-incorrect assembly
This is serial number AIRBAG TRW
01390298080
S/N:01752
93977-D219
Date 12//04//17