Renault Traffic 2018 EDC17C84 not start after AKL, need virgin, off or solution

[Istais]

Hi, had AKL situation, AUTEL IM608II for pin reading did UCH reset and give PIN, after new key programming key remote works, no faults in UCH, but somehow ECM now with renolink show immo Proteced, so I think or the PIN was wrong calculated and as UCH was virgin state it accepted any pin or other reason that ECU lost syncronization. Have no other idea so need virgin or off immo and some help how to make synchronization if possible manualy (Launch, AUTEL, Renolink, CLIP)

UCH is N4 JonsonControls
ECU EDC17C84 0281034037 237106626R

ECU ISK LO: CA 3D FC 27
HI: 01 67
UCH PIN: 2F6489571FDB151ED06E0888AEBF0A07

Maybe someone know to convert PIN to ISK to compare?

I attach full ECU read.

Thanks

[qwojtus]

This is the virgin one but it never worked to me. Try and see in your case. I use emulator if any local locksmith wiped off pin code with Autel or something else. Lots of money but works.
Normally it have " dongle error" and lots of ECU errors which means pin/isk incorrect.

[Istais]

This is the virgin one but it never worked to me. Try and see in your case. I use emulator if any local locksmith wiped off pin code with Autel or something else. Lots of money but works.
Normally it have " dongle error" and lots of ECU errors which means pin/isk incorrect.
Can I have the psw please?