SCANMATIK FIRMWARE

[speedy100]

SM2 PRO
Need the SM2 PRO VCI Firmware file for version 2.21.22 Scanmatik as it got damaged.
I will appreciate Your help as seller does not provide support...



Best Regards

[speedy100]

SM2 PRO
Need the SM2 PRO VCI Firmware file for version 2.21.22 Scanmatik as it got damaged.
I will appreciate Your help as seller does not provide support...



Best Regards

After 100+ views i can not say "No news is good news..." :(

[torzet]

Maybe there will be someone who will share the input for ARM stm32f105. I would be happy to use it as well. I have a damaged sm2pro with a short circuit on the processor.

[speedy100]

Maybe there will be someone who will share the input for ARM stm32f105. I would be happy to use it as well. I have a damaged sm2pro with a short circuit on the processor.

Yes this is what i am waiting for.

[drhg]

Did you fix this error ⁉️

[roma130a]

many places already have this firmware freely available

[bittermeister]

hello , someone tries to get 2.21.23 and higher version for this device?

[mdnnnn]

Hello. I can't download because I'm new. Someone can help, send it by mail I would be very grateful. Thank you!

[khaled]

الإعداد الحر

[aln8]

Hello, has anyone tried to upload this firmware? And with what?

[torzet]

Everything works fine, the way to upload it is on YouTube

[fricker]

can i use it for old not pro version sm2 ? or there is different fw ?

[bubo1997]

many places already have this firmware freely available


thanks for the binary

[ADEL.KSHLAF]

1043944 STM32 ST-LINK

[Den9912]

Hello. I can't download because I'm new.

[artsem48]

Update to 2.21.22

[whiteknight24]

newbie here

[whiteknight24]

thanks alot

[speedy100]

Update to 2.21.22
Has this been tested...? and what are the improvements over 2.21.21 please?

[divavaradam]

i am having the same issue and can you send me these two files in email.

[divavaradam]

hi my Anti virus is blocking the zip file saying virus. is that safe to allow it. please advise. I need the firmware and i have 2.21.22 SM2 PRO + Chinese clone. have anyone tried 2.21.23 or 2.21.24? I am trying clone SIMOS 6.22A ECU and this one is not reading? any advise please will be much appreciated.

[divavaradam]

1043944 STM32 ST-LINK
hi - pin out is good and what cable i need to use it. My SM2 is having a small connect to flash connections and its 5 ping d type small connectors. what kind of cable i need and how to connect to laptop for flashing? what is the s/w i need to use to flash? please help much appreciated

[Ficko750le]

hi where to find firmware for pcm tuner does enyone know

[Mystic Mithical]

For some reason I can't download it either. I mean I made a thread in the introduction post like they asked me to...

[megodahab]

its same frimware i used it and working ok with pcmtuner or any scanmatik here is file and password is parolafree@
https://mega.nz/file/ZghHwKYS#HbZmFmBhwtNS0sy-AYRM6eIl_S6pkJHVcD2hreRomlU

[andrey76]

Version 2.21.32 has already been released.

[andrey76]

I can't post it yet.

[andrey76]

https://scanmatik.ru/about/news/6517/

[Rodrigo Araujo]

Pode compartilhar por favor?

[Rodrigo Araujo]

Olá, funciona bem?

[hikem]

hello there is tuto to flah sm2pro clone
SM2 PRO Flash firmware with ST-Link (https://www.obd2sales.com/sm2-pro-flash-firmware/)
(88) Прошиваем КИТАЙМАТИК | Сергей Штыфан - YouTube (https://www.youtube.com/watch?v=prJZ6o6LZDU&t=37s&ab_channel=%D0%A1%D0%B5%D1%80%D0%B3%D0%B5%D0%B9%D0 %A8%D1%82%D1%8B%D1%84%D0%B0%D0%BD)

[antonis132]

Hi i have a scanmatik device with stm32f105 which has the same issue. But it is from vas device so differents pin out to connect. I have photo me device and a stm32f105 but it does not write which pins are swclk swdio vcc reset so as to find them with a multimeter, only ground i could found...

[fuzz1]

Hi
Where are you buying your scanmatik clone? Can't find any on AliExpress

[torzet]

sm2pro version 2.21.31 and 2.21.32 diagnostics work and work with bluetooth ESP32

[Nikolaikiryanov]

Hello everyone, I can remotely update your SCANMATIK Chinese clone to the latest version. 2.21.35!!! Fully working firmware. To update you need a stable Internet and stlink or Jlink. Cost is $50. Write me a personal message, I'll tell you everything!

[megodahab]

did you fix or still need help

[megodahab]

Hi i have a scanmatik device with stm32f105 which has the same issue. But it is from vas device so differents pin out to connect. I have photo me device and a stm32f105 but it does not write which pins are swclk swdio vcc reset so as to find them with a multimeter, only ground i could found...
did you fix or still need help i can help you

[ProximaCentauri]

Interesting, has any of this been successfully tested by anyone though?

[torzet]

Will version 2.21.35 for sm2pro be released.

[psijunkie]

SM2 Clone Firmware Upgrade/Restore Files, Scanmatik Installers, PCMflash Installers, Instructions etc
2.21.21
2.21.23
2.21.31
2.21.32
https://disk.yandex.com/d/VJekFc0b970xFQ