Eurovox Max V Cable box 2008

[mentorman]

Hi everyone,just got hold of a couple of these boxes to bring back to life. The first one i Jtagged and then loaded up KURO UFL no problem but when i do a powerscan it only picks up 18 of the Normal 38 Transponders in my area.
I live in South Shields and i am on Virg/telepest. The second problem with the other box is the Dreaded two GREEN DOTS on the LCD . I have had this problem before and never fixed the box and sold it on as FAULTY. This box is different as i actually Jtagged it with the 2008 TSOP with Jkeys but still green dots after powering up again. This motherboard has the reset switch so i have tried to upload KURO UFL with com port 1 with no joy. I have set the program away with my finger on the reset and plugged box in and let go but still no joy . I took a working PSU out of another box but this made no difference ! Any ideas on these two problems i am having Guys and gals ???
Best wishes from mentorman ! :flybye:

[satsmo]

Have you tried a booster on the first box? You really like messing with these faulty boxes :)

The second box would usually be a faulty C14 but as you said you replaced the PSU it cannot be that. Have you re flowed the solder joints on the header of the MOBO?

[mentorman]

Yeah satsmo love to punish myself with these boxes ! i will try a booster on the box that only picks up half the transponders and see if that helps ! The Green dots problem took the JTAG no problem with Skymax and Jkeys but never changed the power up situation as the green dots are still showing . Give both boxes to my friend to play about with again. In the meantime i have got a third box that was not powering up at all. My friend changed a couple of things on the power board and then the box powered up only to the red standby light . I jtagged that no problem but it remained the same so switched it off all together. Came back two hours later and then the box did the green dashes in a square then came onto the clock ! ??????? I then uploaded the Kuro software UFL with no problem . Did a powerscan and it went through the 770 transponders and found the usual 38 for my area . Thing is though it did not find any tv or radio channels . This baffles me no end as the remote operates the box now and i can get into the menu's. Did a factory default to start again but no channels or radio ?????? Like you say i like punishing myself lol . Mentorman ! :pcguru:

[satsmo]

Sorry m8, problem boxes are just that........... problems :) Could be a dry joint somewhere, a faulty TSOP, the tuner, the list is endless. I presume you scanned on all providers?

Are you getting any signal level/quality other than the usual 8%?

[mentorman]

Cant be the tsop as i have used it to revive others . havent scanned on all providers as i am on 6952 telepest . Could be power low to the tuner or the tuner itself and not quite sure what you mean about the 8% is that on a progress bar after the scan has finished ? :banghead:

[satsmo]

When I say the TSOP I dont mean the bin file I meant the actual EEPROM itself. Regards the signal level this will be shown at both the TP, (frequency) list and during scan.

[mentorman]

While scanning the LEVEL and QUALITY average around 83% GREEN and fluctuates up and down. Once the 38 transponders have been found the level and quality turn RED bars and average on 8% ??? After the scan has finished on the report page of the 38 transponders they all have a GREEN quality of 83% . :flute:

[satsmo]

Can you even get FTA channel?

[mentorman]

just trying to scan on the other two frequencies now just to prove a point!
cant get any FTA channels either ???????? :giveup:

[satsmo]

If you cannot get FTA then it looks like a tuner issue.

[mentorman]

Ok satsmo thanks for all your help as usual , got 5 EX5000 to play with tomorrow now but off to bed for my needed beauty sleep and docs appointment at 10:30am lol. Later ! :burnout: