Odometer Correction For Renault Clio Year 2003

[simana]

Hello all...
Is someone know how to change the odometer for Renault Clio Year 2003?
What type of eeprom it have, and where is his location???

Thank you.
Isaac.

[drpeter]

Hello all...
I someone know how to change the odometer for Renault Clio Year 2003?
What type of eeprom it have, and where is his location???

Thank you.
Isaac.


Clio 2003 is 95020 eprom in dash.

[tachonow]

Clio 2003 is 95020 eprom in dash.
Clio Symbol have Nec mcu.

[simana]

I looking for picture of the chip. board, and some instruction.
I already have a eeprom programmer, and want to know if it enough or i need to buy nec programmer.
Regards,
Isaac.

[drpeter]

I looking for picture of the chip. board, and some instruction.
I already have a eeprom programmer, and want to know if it enough or i need to buy nec programmer.
Regards,
Isaac.

You need a programmer that read/write 95020 chips nothing elso. You can post dump here if you can't calculate the dump yourself, no problem. Carefully remove needles and remove eprom. This type eprom is not sensitive so you can also program onboard if you short the xtal. But only if you can't remove the eprom with hot air.

[mastaflex]

i think removing the eprom will be more safe because of wrong reading. try to read the dump more than one time and compare before making change

[simana]

Hello All, and thank you for yours reply.
My programmer is simple and can only read/write chip: 25020
Is this the same???
can someone verify it???

[CumbaJohnny]

Yes you can read with 25020 but use software like lickzinck or NYO4 to show you the old odometer, if the it's wrong don't do try to program the ship!!!!

[simana]

I look on the DataSheet and it's say:
ST95020: 16 byte page mode
AT25020: 8 byte page mode
are you sure it's safe?

[CumbaJohnny]

yes it's safe if the NYO4 or lickzinck show you the old odmetre
you can swap you file too , using software .....

[PremierD]

I look on the DataSheet and it's say:
ST95020: 16 byte page mode
AT25020: 8 byte page mode
are you sure it's safe?

Read and post the dump mate .....and yes it will read as 25020

[panos_k]

I look on the DataSheet and it's say:
ST95020: 16 byte page mode
AT25020: 8 byte page mode
are you sure it's safe?

25C20 = 95020

Read with 16 or 8 byte and compare with the upload dump. Yes it?s safe to read and write 16 or 8 byte mode.

[simana]

Hello all....
Here is the dump for my renault.
The odometer now is 121100KM
I want to change it to 86000KM,
Please help.
Regards,
Isaac.

[tachonow]

Hello all....
Here is the dump for my renault.
The odometer now is 121100KM
I want to change it to 86000KM,
Please help.
Regards,
Isaac.
Try this m8.

[panos_k]

Hello all....
Here is the dump for my renault.
The odometer now is 121100KM
I want to change it to 86000KM,
Please help.
Regards,
Isaac.

This is for 86000km

[cliod7f]

Thank you, this bin was great help for me!