PDA

View Full Version : renault master 2.2dci 02 immo off.



darrenhyland
30th August, 2010, 12:21 PM
I have a 02 master 2.2 dci with an immo problem......using upa i read the 95po8 and used immokiller to remove the immo, my problem is when refitted back in the van it starts and runs first time perfectley but when restarted it wont run...do i need to do something else? each time i rewite new immo off dump it runs first start then back to no start when i turn it off and on again!! Its a 3 plug bosch ecu..0281010784.PLEASE HELP IF YOU CAN.

dimitar
30th August, 2010, 12:34 PM
Try to disconect the immobiliser line

marassa
31st August, 2010, 04:27 AM
witch soft you work with it

darrenhyland
31st August, 2010, 11:51 AM
hi Marassa, thanks for the reply...i am using immokiller software to change the immo dump from 95p08.....i am using UPA USB programmer reading/writing eeprom under ST95P08 setting.

siautomotor
31st August, 2010, 11:59 AM
hi Marassa, thanks for the reply...i am using immokiller software to change the immo dump from 95p08.....i am using UPA USB programmer reading/writing eeprom under ST95P08 setting.


TRY SWAP BYTES AND CUT INMO LINES
OMAR GROSJEAN
SIAUTOMOTOR

darrenhyland
31st August, 2010, 12:09 PM
Hi Siautomotor....can you explain 'swap bytes'? how do i do this?

marassa
31st August, 2010, 10:04 PM
yes SWAP BYTES it's in you programme whin you read it you tray to swap it's like licznik or Neo

marassa
31st August, 2010, 10:04 PM
1- tray to deconect eprom from calculator

Nabil1987
31st August, 2010, 10:26 PM
I have a 02 master 2.2 dci with an immo problem......using upa i read the 95po8 and used immokiller to remove the immo, my problem is when refitted back in the van it starts and runs first time perfectley but when restarted it wont run...do i need to do something else? each time i rewite new immo off dump it runs first start then back to no start when i turn it off and on again!! Its a 3 plug bosch ecu..0281010784.PLEASE HELP IF YOU CAN.
renault master have the EDC15, you must remov immo in the flach memory i can help if you read and send me the dumps of the 29F400....

BeianM
31st August, 2010, 11:00 PM
See the follwing links, obdmaster (http://www.digital-kaos.co.uk/forums/members/84970-obdmaster/) is your man.

http://www.digital-kaos.co.uk/forums/f178/renault-master-2-2-dci-138774/

http://www.digital-kaos.co.uk/forums/f175/immo-off-virgin-ecu-database-82099/
hope this helps.