Openbox S9 HD PVR Linux Satellite Box [Sitemap] - Page 3

choozay

20th January, 2011, 03:33 PM

lol..Trust me if i knew how to do it I would been helping instead of asking for help.

I still aint got my openbox setup to recieve all channels yet!! At this point im useful as a blunt knife!!

footyaddict

21st January, 2011, 12:55 AM

got this box (openbox S9 HD PVR) yesterday and first impressions are good, for the money, but I have found a few gremlins already...anyone got a fix for these?

EPG is only now and next...my old techno can do 7 days on the same channels with its latest patch so surely this box should do it?

You can only have 4 clines active at once....my server supplies 5.

The boot loop problem is very annoying, i got it on sly sports 4 sd...had to take the sat cable off to get out of it.

The OSD display message when viewing via scart in the bedroom, this is an HD box so you want to set it to 720 or 1080 for your main screen ...which gives this display message on your scart out.

How do I quickly add a channel to favourites?

Also i scanned a few satellites, now my channel memory is full...is there a way to bulk delete channels without deleting the chosen satellite?
Cheers all.

Would love to be able to sort the OSD message too, anyone have a fix for this yet?

mept1

21st January, 2011, 08:13 AM

Thanks, but this shows the servers online that you are connected to. What I was on about is on TMN & DM when you have several lines from several provides you can see which server you are connected to on a specifc channel, it looks you can't do this with Openbox. I just got the box yesterday and had quick play with it.

FOR FURTHER INFO>>>>

Once you have access to a channel via your cline.
Click Menu -> Network Setup -> CCcam Client Setup -> Manage Config Files -> CCcam.cfg
then highlight any single cline and click the 'Info' key
you will then get access to further information.

mept1

21st January, 2011, 08:33 AM

Would love to be able to sort the OSD message too, anyone have a fix for this yet?

The only solution to remove the message is>>>pressing the v.format button untill you reach tv system 576i.

scoobyjones1

21st January, 2011, 12:38 PM

The only solution to remove the message is>>>pressing the v.format button untill you reach tv system 576i.
With respect, that is not a solution as we would like HD on the main screen..720 0r 1080...all they need to do is remove the osd message in the firmware as the picture seems fine underneath that.

mept1

21st January, 2011, 06:35 PM

agreed,sure it will be addressed in the next update,...still early days for this box

theshadygavster

21st January, 2011, 06:54 PM

i have one of these boxes pictue quality is great but i do have a freezing problem that i do not get with my dreambox.

Adam_UK

22nd January, 2011, 12:28 AM

This is great box, I am sure all issues on this box will be ironed out in the coming patches.

rrob311

24th January, 2011, 03:47 PM

I was thinking of buying one of these but wasn't sure if it was much better than the Sonicview8000.

s23pho

24th January, 2011, 09:32 PM

hi openbox owners, i think im going to be getting one of these boxes next week, does anybody know if the EPG has been upgraded in any of the released firmwares, can't find any information on it's EPG. Thanks

hooley

24th January, 2011, 10:09 PM

epg is now and next only except for some providers like sly Ger.

s23pho

24th January, 2011, 10:30 PM

i suppose that will do, this box seems well worth the price<br>

dragon464

25th January, 2011, 05:46 PM

Mein sky hd funktioniert nicht auf meiner openbox was kann ich dagegen tun?

bighun

25th January, 2011, 08:15 PM

i have had my openbox for 4 weeks and it has been excellent so far a wee bit annoying is rebooting on some channels but you just delete the channels once the manufacturers sort out all the wee niggles with the box via firmware updates which come out pretty often there are some good deals on ebay at the moment but make sure you get one with the new v3 remote as the original one is a bit crappy

smilymoon4u

26th January, 2011, 12:36 PM

hi all i just oppened my openbox s9 hd pvr scaneed all chnls but sly chnls are not working on screen its wrinten scrambled i am compleatly new with these box help please.....

hooley

26th January, 2011, 12:41 PM

Google "cardsharing"

smilymoon4u

26th January, 2011, 12:48 PM

hello mept1,
I bought 1 openbox S9 HD Pvr.
I am using the latest firmware available.
But I have no idea to set up my CCcam,cfg file.
The first thing to do is how?
Please help.:y:

i just oppened my box today scan the channels but sly chnls are not working and i am new to these boxex any help please:help:

smilymoon4u

26th January, 2011, 01:07 PM

Hi. After reading the advice on this forum. I have successfully setup a S9 openbox with CS share. Thanks for your help.

I am experiencing crackling audio on loud audio like others have stated. Is this related to the box or fimware?

I can no longer save my firmware to USB since upgrading to the latest firmware HDS2_CMT_1011161216. I know that this issue has already been recorded. Does anyone know it this was intentional or a bug in the last software release?

Thanks for your replies
i am new with these boxes don't know any thing just install mine but cant see sly channels its saying scrambled help please

footyaddict

26th January, 2011, 02:05 PM

Please delete post.

Shady

26th January, 2011, 02:06 PM

it is SOOOOOO against the rules, i'd delete it before a mod does mate

hooley

26th January, 2011, 03:10 PM

hi all i just oppened my openbox s9 hd pvr scaneed all chnls but sly chnls are not working on screen its wrinten scrambled i am compleatly new with these box help please.....

Look, you can ask 3 times, what you need can't be discussed here ok. There is plenty of other sites that will give you the info you need. Google is your friend as iv already told you

bighun

26th January, 2011, 03:39 PM

the crackling is caused by having your tv volume up to high try putting the tv at half volume and openbox at half volume or above

PremierD

26th January, 2011, 03:54 PM

Please delete post.

To late mate ..tip : Read the rules BEFORE you post

s23pho

27th January, 2011, 11:28 PM

just ordered my openbox S9 HD from ebay, should be here by wednesday latest. Is there a firmware that i should avoid when it comes?

mept1

28th January, 2011, 12:55 AM

avoid?,...haven,t hered of any!!

samcollins115

28th January, 2011, 05:01 AM

i just got a skybox today so for working good with know updates

rrob311

30th January, 2011, 03:34 AM

just paid 120 shipped for one on feebay so hopefully it works out.

s23pho

30th January, 2011, 03:46 PM

really, i paid 84 on feebay on thursday evening, UK seller V3 !

rrob311

31st January, 2011, 02:14 AM

If we are talking pounds I paid 75.78

royboyz

31st January, 2011, 06:01 PM

bought an Openbox ?85 delivered from ebay at christmas, upgraded from a dreambox 500s, never had a problem with this box, the dm500s would pause and i would have to reboot every so often, fingers crossed this box has been imacculate and HD!!!
Only thing is sometimes the remote is slow to respond so you press it a few times and then it kicks in and flys past the channels and the Epg is poo

adnpas

1st February, 2011, 04:34 PM

Hello
Which is last firmaware for skybox (openbox) s9 hd? Where can we download it? How to flash with serial cable? Which sw like "dream up" for DM I can use for skybox?

nowuckinfurries

1st February, 2011, 06:48 PM

Hello
Which is last firmaware for skybox (openbox) s9 hd? Where can we download it? How to flash with serial cable? Which sw like "dream up" for DM I can use for skybox?

Blimey, not after much in your very first post are you mate....................

eattheliving

1st February, 2011, 08:39 PM

Hello
Which is last firmaware for skybox (openbox) s9 hd? Where can we download it? How to flash with serial cable? Which sw like "dream up" for DM I can use for skybox?

latest f/ware for the s9

http://www.digital-kaos.co.uk/forums/f184/openbox-s9-hd-pvr-linux-satellite-box-158127/index26.html

ziggycat

2nd February, 2011, 06:53 AM

hi Im tempted to get one of these as an upgrade to my dm500s, couple of questions if someone could let me know,

can you install a hardrive?
can you record and pause live tv?

thanks

gazza12

2nd February, 2011, 04:27 PM

hi Im tempted to get one of these as an upgrade to my dm500s, couple of questions if someone could let me know,

can you install a hardrive?
can you record and pause live tv?

thanks
You can record onto a USB, which will limit your recording. The EPG will only show now and next (no 3 day or 7 day epg).
The box is cheap, but you might consider saving a few more quid and going for a Dm800 (clone) for a few qui more.

royboyz

3rd February, 2011, 07:32 PM

can you install a hardrive?
can you record and pause live tv?

use a pendrive, 16gb at least had an 8gb but not big enough, as timeshift alone (pause live tv) hogs around 4-5gb and HD recordings take up a lot

I like this box as i have all my AV stuff in the corner of the room in a cabinet and this box runs Cold as Unlike my old DM500s 'mini radiator'

hendrik200

4th February, 2011, 01:29 PM

can openbox be telnet like Dreambox? or like any linux ???
how but it

leeryan

4th February, 2011, 08:42 PM

No you cant telnet to it, only via serial port on the back or USB connection.

Krogen

7th February, 2011, 07:40 PM

Hi all
i have a question that i hope someone can answer.
I have a openbox and i like it verry much.
The only problem i have, is that i have to manual put Danish Subtitles on after a channel change?. i also have tried to put different firmwares on, in order to changes the osd languages to danish. On the openbox in the menu point Language it is not possible to chose Danish under subtitles ???? :dontknow::dontknow:
I would appropriate all help i can get out here.
Regards rtp2000
Hi'e Rene.

I have exactly the same problem as you. Did you find a solution for the problem ?? Regarding the osd menu (missing danish) thats fixed in the new firmware from january...

Krogen

7th February, 2011, 07:43 PM

bulldog1962

7th February, 2011, 11:21 PM

just bought an open box not sure what it can do can i card sare ect and what channels on a fixed dish

hooley

7th February, 2011, 11:30 PM

just bought an open box not sure what it can do can i card sare ect and what channels on a fixed dish
You can use it with a fixed dish no problem. The channels you recieve are depending on what satellite you are fixed on and wheter or not you go down the shareing route.

bulldog1962

9th February, 2011, 04:13 AM

thanks its a fixed sky dish( previous tenants) tell me more about card share pls :hello:

hooley

9th February, 2011, 09:35 AM

thanks its a fixed sky dish( previous tenants) tell me more about card share pls :hello:

You will have to google that I'm afraid, csharing can't be discussed here. Plenty of other websites out there with that info

youngie1

11th February, 2011, 09:41 PM

can anyone tell me the latest files for the openbox and how do i flash the files to the boxes

peterduong

14th February, 2011, 10:02 AM

Azan m8
attached is a compilation of several tutorials ~ a few of the procedures are repeated a couple of times , but you will get the general idea. Just follow this thread back a few weeks to find the latest firmware ~ NM_HDS2_CMT_1011081100 is what I am using.
Thank you so much. those tutorials would certainly help a new owner of this box like me :ciao:

gman

14th February, 2011, 10:35 AM

Hi there all. Just bought the openbox. Wanted to know if any of you have the updated firmware for it. Or if you could please give me a url and where to get it from. Also new to this> Will the bouquets that i have on my dreambox> Is there a way to copy them to my openbpx s9?

Thanks and i hope you all have a good week.

shariifi

16th February, 2011, 06:53 PM

Please if you own Openbox S9 HD, can tell me the picture quality of SD Channels e.g MBC1, MBC2, MBC3, or Cbeebies and does it break up. I am only interested to watch SD channels for now and HD cardsharing in the future.

iraklanos

22nd February, 2011, 12:51 PM

Hey i just bought a openbox s9 HD , and i was wondering,what is the best stable firmware u ppl reccomend to me ?

kevhky

23rd February, 2011, 09:58 AM

Check the post openbox s9 ive just uploaded the newest firmware most people are using right now

heres the link firmware near bottom of page
click here
http://www.digital-kaos.co.uk/forums/f184/openbox-s9-158982/index9.html

Kev

alobar

24th February, 2011, 09:20 AM

# Archive NM_HDS2_CMT_1101030405.rar
2011-01-02 22:05 4194304 1378166 22af119b NM_HDS2_CMT_1101030405.abs
#
# Total Size Packed Files
# 4194304 1378166 1

1. Improved some of the reading problems from viaccess smartcards
2. Improved speed for cccam
3. Added cccam`s cccam.prio file to improve cccam share HD channels
4. Added Danish language
5. Attrack clone STB to upgrade the new firmware (not sure the translation of this...)

Tested and working
I take error your verion clone :S

Bazigar007

25th February, 2011, 10:36 AM

Try this site m8 .....
OpenBox S9 HD PVR (http://www.dreamboxsales.co.uk/index.php?route=product/product&path=37&product_id=62)

SG8

25th February, 2011, 10:42 AM

Try this site m8 .....
OpenBox S9 HD PVR (http://www.dreamboxsales.co.uk/index.php?route=product/product&path=37&product_id=62)

I DON'T THINK SO, did you see this thread ?? Out of stock on that site anyway!!

http://www.digital-kaos.co.uk/forums/f39/advice-seller-please-189595/

portbhoy

25th February, 2011, 12:05 PM

Try ioffer if your looking for any box, they're always worth a wee check ;)

abidpioneer

2nd March, 2011, 11:37 AM

Which is the best firmware available for openbox s9...

mast

3rd March, 2011, 12:25 AM

Which is the best firmware available for openbox s9...

Hi

Dont know about the best but this seems to be the latest. New as of today.

http://www.digital-kaos.co.uk/forums/f184/new-software-2-3-11-a-193207/

Regards

derbyed

3rd March, 2011, 12:13 PM

Hi guys I've had this box for over 6 months now and its great only thing is the software I've got is old ...but its got favorites included ..does anyone who's tried the latest software know if thats got favories included too..if not how would I go about making a favories list

dell_xps

3rd March, 2011, 12:46 PM

Look for kevh post in this section, he has
a brilliant channel dump, everything in order.
Latest firmware posted yesterday by Hooley.
Have a look in this section 4 both m8.
HTH

derbyed

3rd March, 2011, 03:14 PM

Thanks Dell for your fast reply mate ..but can you diect me further to the dump that Kevh made ...I did a search for his posts but couldn't find any ..many thanks again

love rose

3rd March, 2011, 03:49 PM

Hi dearest forum members and all senior i,m new in this forum please some body help me how can i put key in my (OPENBOX s9 HD pvr manualy thanks

dell_xps

3rd March, 2011, 07:25 PM

At work just now, will post it up later on tonight
4 you ok !!

smartsweden

3rd March, 2011, 08:26 PM

Hello

Im new here at the forum

I have some problems with my openbox
The box Freeze att HD channels and Sound out of synk

Not freeze compleatly just for 1 sec

Some one have a solution?

SG8

3rd March, 2011, 09:12 PM

Hello

Im new here at the forum

I have some problems with my openbox
The box Freeze att HD channels and Sound out of synk

Not freeze compleatly just for 1 sec

Some one have a solution?

Does it freeze very often ?

dell_xps

3rd March, 2011, 10:35 PM

Hello

Im new here at the forum

I have some problems with my openbox
The box Freeze att HD channels and Sound out of synk

Not freeze compleatly just for 1 sec

Some one have a solution?

It's the server you are connecting to, ask them to change you to a different one.

dell_xps

3rd March, 2011, 10:42 PM

derbyed you got a PM.

derbyed

4th March, 2011, 09:18 AM

I want to thank Dell for his help . Now I find another problem that I wonder if anyone can explain although I get loads of channels and very good recption there are a couple that when I go on them either say no signal ? I am using astra and eurobird

okverd

4th March, 2011, 10:37 PM

omerli

5th March, 2011, 12:11 AM

Hi guys,

I have used the TP_PROG that kevh has uploaded but i am still unable to load the fav channels.
I have gone to >Tools>Upgrade by usb>misc files>select & upgrade>TP_PROG. then reboot when it's finished but i still dont have the fav's
Please advise.

pajiballebaaz

5th March, 2011, 10:52 AM

thank you for sending the files, it is really worth it.:coffin:

okverd

5th March, 2011, 03:31 PM

Please help, after few restars its say: "This box is clone version!!!!!
After I repairing with dump file its working fine, but its happen again when I restart the box.
Please which firmwire, or DUMP file to use.
Thank you very much for any help

the man

7th March, 2011, 03:00 AM

bernado

7th March, 2011, 06:52 PM

mept1

7th March, 2011, 08:11 PM

Remeber to factory reset before you dump,....

okverd

8th March, 2011, 09:11 AM

Which dump did you use?
Im not sure which idump file I used... but I repaired get working again, but after few restart its happen again its said: "This box is CLONE version!!!!
Im using the latest firmware:
NM_HDS2_CMT_1101030405
HDS2_SCMT_1103021205
Please any advice which firmware or dump file to use.
Thank you very much

bernado

8th March, 2011, 05:55 PM

Im not sure which idump file I used... but I repaired get working again, but after few restart its happen again its said: "This box is CLONE version!!!!
Im using the latest firmware:
NM_HDS2_CMT_1101030405
HDS2_SCMT_1103021205
Please any advice which firmware or dump file to use.
Thank you very much

I've been using the firmware and channel list here in post 173 - http://www.digital-kaos.co.uk/forums/f184/openbox-s9-158982/index12.html#post993226

May be the same as you anyway. As mentioned before, have you performed a factory reset before applying any updates?

gate78

9th March, 2011, 01:21 PM

i just unpacked my S9 and replaced my DM500s with it, but there is no signal on the S9. I was using it to watch hotbird. No matter what i try theres still no signal. Can someone help me?

SG8

9th March, 2011, 02:27 PM

i just unpacked my S9 and replaced my DM500s with it, but there is no signal on the S9. I was using it to watch hotbird. No matter what i try theres still no signal. Can someone help me?

Did you scan the satellite ??
or is everything in Chinese???

dell_xps

9th March, 2011, 06:56 PM

i just unpacked my S9 and replaced my DM500s with it, but there is no signal on the S9. I was using it to watch hotbird. No matter what i try theres still no signal. Can someone help me?
Got the cable going in the right one ?, one is in and the other is for out.

interviciado

13th March, 2011, 01:44 AM

Im installed this latest firmare and after reboot it say: "THIS IS CLONE".... Im trying flash it with oldest firwmare but unsuccessful. Still after reboot its say "CLONE"
Please, how to kill this new firmware...
Thank you
Regards

The SAME thing is happening to me, i received it 2 days ago with the 2010.10 firmware and the first thing i did was to put the 2011.03, after a few hours of use and customization i got this clone message after a restart.

I cannot downgrade for ANY verstion that is different from 2011 versions. If could downgrade i'd get rid this f.. "clone version" bootloader, but the box wont accept, wont boot.

I'm pretty sure they are doing it on pourpouse, but why??

I compared the PCB board from my openbox and it's iqual to others openbox, also i got a pic of a clone, and i can asure mine is original.

The only way i can keep the box running is not to turne off it several times or it will brick as yours.

Why is it really happening? It's not a bad firmware install as said LAURALS. It's a bomb to kill just clones that is not working well.

suranjith

13th March, 2011, 03:41 AM

The SAME thing is happening to me, i received it 2 days ago with the 2010.10 firmware and the first thing i did was to put the 2011.03, after a few hours of use and customization i got this clone message after a restart.

I cannot downgrade for ANY verstion that is different from 2011 versions. If could downgrade i'd get rid this f.. "clone version" bootloader, but the box wont accept, wont boot.

I'm pretty sure they are doing it on pourpouse, but why??

I compared the PCB board from my openbox and it's iqual to others openbox, also i got a pic of a clone, and i can asure mine is original.

The only way i can keep the box running is not to turne off it several times or it will brick as yours.

Why is it really happening? It's not a bad firmware install as said LAURALS. It's a bomb to kill just clones that is not working well.

dear bro,

how to identify its original or clone box?

suranjith

13th March, 2011, 03:52 AM

dear experts

i have dough about open box s9 receiver, open box make in china ,so how can be a clone?

how can we find its original or clone?

i saw many members say firmware not support or reboot...etc...etc....

dream box make Germany, then fake box came from china. its true ,but open box make and distribute from china

openbox its very cheep box ,so why its clone?
can you explain dear experts

thank you

Specialized

13th March, 2011, 10:09 AM

Did the added danish language include the danish charset ? I have downloaded a version with danish subtitles and there is strange signs when ? ? ? is showing. Also you cannot lock the language to danish. It turns back to english as first language when exit menu.
Just before downloading and erasing flash i wanted to know for sure ?

okverd

13th March, 2011, 09:46 PM

Im many times repaired the box, but after few restarts, its came again the message: "This box is CLONE version!!!. maybe I have bad serial cable. When I done test with "loopback" tester its say "FAIL"
Another option: Im contacted the factory where I bought the Openbox... they sent me pictures which connectors I have to check and repair.
If you are interested, send me your email I will send you all instructions and softwares I've got.

interviciado

14th March, 2011, 10:48 AM

This is the clone version

And this the original

interviciado

14th March, 2011, 10:58 AM

I'm sure my cable is ok!

interviciado

14th March, 2011, 11:02 AM

In many times repaired the box,

interviciado

14th March, 2011, 11:17 AM

You guys that do not have

hooley

14th March, 2011, 12:23 PM

You guys that do not have any problem with this clone version are using the 2011 fw, right? it may be january or march, doesnt matter, both include the bomb.

Are you able to downgrade to a 2010 version?
Could you try?

I'm using the march firmware and iv put the October firmware on no problem.

kadnor

15th March, 2011, 12:48 PM

Hi,
Would you help me by explaining how to get these wordings on my TV screen when
I power-on my OpenBox S 9.

No OSD . Press V Format to switch.

I follow the command more than 6 times, these wordings did not "hide out"

How to proceed positively.
Thanks, Rgds,
kadnor

dell_xps

15th March, 2011, 09:51 PM

How do you have it connected ?, scart, hdmi etc etc,
what firmware do you have on it ?

interviciado

17th March, 2011, 11:50 AM

I got an answer from YAO XIN

suranjith

18th March, 2011, 03:46 AM

I got an answer from YAO XIN about this clone issue.
YaoXin Electronic CO.,LTD (http://www.yaoxincn.com/)

---

<tina11_star@hotmail.com> parahttps://mail.google.com/mail/images/cleardot.gif gustavomcr@gmail.com,
https://mail.google.com/mail/images/cleardot.giftony-yaoxin@hotmail.com,
https://mail.google.com/mail/images/cleardot.gifpeter-zhou1986@hotmail.com

RE: "your box is a clone version"

yes the openbox which you order is clone version you should know ,all china is clone version ,not have the original
if original the price should be double or 3times ,you should know that
for cheap price just buy this box
and for this box canot update the software ,because this is clone version , and right now also no need update
as so far we don;t have the new software for your update ,after coming out will inform you
so this is ok ,if ou don't know this is clone means you don;t ready and communction with us before you buy
tks
tina

i have question then where is came original box ? and price

shokat

19th March, 2011, 12:28 AM

hi you cant flash

tarekaldbes

25th March, 2011, 06:35 PM

this is last updates
hi. my skybox does not find any cccam from the usb. is there something wrong with my skybox? or am i trying to downoad an incorrect file onto my skybox? Is there any solution for my problem?

tarekaldbes

25th March, 2011, 08:08 PM

I'm using the march firmware and iv put the October firmware on no problem.
hi. my skybox does not find any cccam from the usb. is there something wrong with my skybox? or am i trying to downoad an incorrect file onto my skybox? Is there any solution for my problem?

dell_xps

25th March, 2011, 08:41 PM

Format memory stick, Fat32, then copy over
your file.

hooley

25th March, 2011, 08:41 PM

hi. my skybox does not find any cccam from the usb. is there something wrong with my skybox? or am i trying to downoad an incorrect file onto my skybox? Is there any solution for my problem?
Will you stop posting all over the place, good man.

scoobyjones1

28th March, 2011, 07:29 PM

It WONT play avi or mpeg or mkv...wish it could !! Anyone clever enough to figure it out?

scoobyjones1

31st March, 2011, 05:14 PM

I gave up and bought a Cyclone Primus Media Player...it's great, plays all my avi's, mkv, mpegs, divx, jpegs, mp3s etc and has freed up space on my pc...recommended !

interviciado

3rd April, 2011, 04:27 AM

After i put the march-15 firmware it has stopped saying my box is a clone and bricking it.
now its really fine.

I just didnt like that the blind scan is really slow in these newer versions.
I think they have changed it to scan the bandwich since 1000kbps, before was 2000kbps to 45000kbps.

Specialized

4th April, 2011, 09:21 AM

I'm using the march firmware and iv put the October firmware on no problem.

Yes, but still locked in english language as first/second priority. When changing audio to DK it just skips back to english without saving the changes.

I tryed some modyfied dk soft but this makes the cccam log on/off all the time and still ? ? ? jumps all over the subs.

Anyone ?

mick1965

4th April, 2011, 06:39 PM

my box will be deliverd on wed is there anything i shud know about firmware ,can i just scan it on 28.2 or is it better to put a channel list in first .just read a few threads sounds a bit scary (bricked/clone boxes /rebooting itself etc)
thanks in advance...;)

nikkz

4th April, 2011, 06:45 PM

How do you restore its openbox after it became a brick. Can you see the photograph of the innards of your openbox

nikkz

4th April, 2011, 06:51 PM

After i put the march-15 firmware it has stopped saying my box is a clone and bricking it.
now its really fine.
How do you restore its openbox after it became a brick. Can you see the photograph of the innards of your openbox

hooley

4th April, 2011, 07:29 PM

How do you restore its openbox after it became a brick. Can you see the photograph of the innards of your openbox
how did you brick it? is it a clone or original?

nikkz

4th April, 2011, 07:56 PM

how did you brick it? is it a clone or original?
it openbox clone

hooley

4th April, 2011, 08:18 PM

it openbox clone
Have a read here http://www.digital-kaos.co.uk/forums/f184/flashing-box-but-nothing-except-display-192447/

Midnight Rider

4th April, 2011, 09:54 PM

I have a question, how easy is it to tune a motorised dish with this box using diseqc 1.2.

Some boxes I've had in the past will display the sat provider to let you know you facing the right sat, does the S9 do this. I need to use disqec as my motor struggles with usals.

Should have the S9 in the next couple of days.

Cheers

mulgen72

12th April, 2011, 06:07 PM

i am using Openbox s9 HD lsat 7 months ..no prob ..if u are new to linux systems go to openbox s9 hd easy to setup and enjoy all hd chanels with out problems..cccam and newcam works very good freeze freeeeee lol
but not accept more then 7000 tv channels :-) and
can not connect to pc or laptop

hooley

12th April, 2011, 06:31 PM

metince

13th April, 2011, 04:41 PM

thanks for the information i was getted one openbox as original i did look inside its gold color

paddyfields

24th April, 2011, 12:09 PM

Hi All

Just wondering has anyone tried out the Openbox S9 HD PVR Linux Satellite Receiver saw them on ebay for ?125

had one now as 3 months!!!!! cant find a problem other than the reboot thing but was sorted when i made up a few favs lists.... hd is perfect

satpink

29th April, 2011, 09:12 PM

i've been away for a while from the dreambox scene, now thinking of ditching sky but i want to keep my HD sub & use around the house, i have a open media (dm500 clone) could i use this as my server with sky card in & use 2 of these boxes in my other rooms ok & share the sub?

camoy0

3rd May, 2011, 08:31 AM

Hello, I'm new to this box. Is HDS2_CMT_1101030405 the newest firmware? If not can you please point me to the right direction. I can***8217;t find the official website.
Thanks

orangebear

4th May, 2011, 08:33 AM

ive got openbox 7000hd in bedroom great box for price i got mine from a web shop for ?80 next day delivery it is basic but i think the quality of picture when watching hd channel is realy good for the price you might pay for a china dm you get hd record to usb memory stick updating box is by usb and remote for me it dose what i want it to do being disabled its just about idiot proof only little problem ive had was i put it in livingroom as my box there was freezing and glitching every couple of breaths and i tried after football to install onto motorised dish but i struggled setting up so back to fixed dish for openbox

nowuckinfurries

5th May, 2011, 05:50 PM

Decided to dust off my S9 today.
Anyone know why no matter what Firmware or Channel dumps I use I still cannot get amongst others Sly Sports Hd3, all Hd Movies ? the corresponding non Hd chan is fine.

I have tried April,March Jan Firmware with all different chan dumps but still no joy. I have done this a few times now over the last 6 months or so and generally it's been fine but now it's all gone tits up.

They all work fine on my 800Hd but not on Openbox connected to the same feed ( not at same time)
I have been in the all chans list after a scan and tried the various ones there but all I get is " No Signal"

now scratching my head a bit.

Nwf

bernado

5th May, 2011, 06:49 PM

borderfox

5th May, 2011, 06:52 PM

Hi all. I have heard mention of clones flooding the market. I want to order up another box - as i'm quite happy with the other one I received.

How can I make sure its not a clone i'm ordering?

Thanks in advance.

Borderfox

bernado

5th May, 2011, 07:13 PM

nowuckinfurries

6th May, 2011, 11:27 AM

Have you tried doing a channel search of the appropriate transponder from the menu's transponder list? eg Sky Sports HD3 is on transponder 12363.00 V

Sorted.

It was a signal issue. My Openbox tuner must be weaker than my DM800. An inline amp has sorted the issue.

Cheers all

Nwf

citygent1911

7th May, 2011, 08:09 AM

Just a quick note to anyone looking at the openbox - there seems to be a new firmware out from 6th May which will allow FTP access via a dedicated bit of software. Just downloaded it now, but won't be till later today that I can upgrade & report.

Still using March FW and suffering from crackling audio.

I recorded The Pacific on Sly atlantic and the explosions etc cause the box to rattle the crackling is that bad! Hoping newest FW will fix this, otherwise no complaints about this box at all (apart from the CRAP epg!!)

CG

hooley

7th May, 2011, 10:31 AM

The April fw is meant to have fixed the crackling audio problem CG.

borderfox

7th May, 2011, 11:30 AM

Hi all. Can the reboot issue raise it's head all of a sudden despite using a good channel list? The reason I ask is that I have been using a good channel list for the past few weeks.

I went to check the TV this morning - and the box boots up into SS4 - but if I try and change channel (regardless of which channel), the box goes into a reboot.

Any insight that anyone has on this would be very welcome.

billhates

7th May, 2011, 06:04 PM

any good firmwares for s9?

citygent1911

7th May, 2011, 07:36 PM

The April fw is meant to have fixed the crackling audio problem CG.

Cheers hooley - not put audio to the test cos little un's watching some crap with sinita & jedward "singing" on ITV, so volume as low as possible!!

BUT - and it may be me, but the EPG has gone! Press EPG button and you get a programme summary of now & next.

Either I'm doing something wrong, or the developers have decided the only way to stop us whinging about crap epg is to get rid of it!

Anyone else found this?

hooley

7th May, 2011, 08:04 PM

My epg comes and goes sometimes, quick reboot fixes it

pisaaen

7th May, 2011, 09:01 PM

Hi All

Just wondering has anyone tried out the Openbox S9 HD PVR Linux Satellite Receiver saw them on ebay for ?125

Yes I have used it for a couple of monts now and its pretty awesomome. But li like the remote from the Dreambox better though.

calhib

7th May, 2011, 09:03 PM

can you put keys on a openbox s9 like u can a dm500s for things such as orf thanks calhib

hooley

7th May, 2011, 09:16 PM

You can indeed load a softcam.

calhib

7th May, 2011, 09:19 PM

does it work for all encryptions or only certain 1s

citygent1911

8th May, 2011, 10:22 AM

My epg comes and goes sometimes, quick reboot fixes it

Several reboots and it's still gone. It's not that there's no data in the epg - there is no epg!

When I press the EPG button, the attached photo is what I get...

Any ideas?

calhib

8th May, 2011, 11:10 AM

where is the best and cheapest place including p+p for an original openbox s9 thanks calhib

citygent1911

8th May, 2011, 12:53 PM

Hi Calhib,

this is where I got mine - great service and a decent price too.

Openbox S9 NOT A CLONE (http://www.swanside.net/s9/Openbox/openbox.htm)

Mines definitely not a clone, and I think he gets them straight from manufacturer in China. Good luck...

hooley

8th May, 2011, 01:58 PM

Several reboots and it's still gone. It's not that there's no data in the epg - there is no epg!

When I press the EPG button, the attached photo is what I get...

Any ideas?
It seems with the latest firmware they have been messing with the epg again. So what you are seeing is right.

citygent1911

8th May, 2011, 03:10 PM

It seems with the latest firmware they have been messing with the epg again. So what you are seeing is right.

Oh heck - it's gone from bad to worse! Now I have to switch to a channel to see whats on now & next - at least we could see what was on several channels at once before.

Unless of course it means they are working on a "new improved" EPG?! Sorry - wishful thinking!!

Cheers Hooley :)

phughf

8th May, 2011, 03:42 PM

Have to say just purchased box and set it up, What an excellent box for ?80 loaded the new firmware that was released 5th may and new channel lists and its running like a dream,Great hd picture

bowden2010

9th May, 2011, 03:49 PM

is there any new chanel list latley for the s9 like this month ???

bernado

9th May, 2011, 07:30 PM

Oh heck - it's gone from bad to worse! Now I have to switch to a channel to see whats on now & next - at least we could see what was on several channels at once before.

Unless of course it means they are working on a "new improved" EPG?! Sorry - wishful thinking!!

Cheers Hooley :)

My EPG works the same as before with the new firmware, so it's odd yours has fouled up

Edit - I'm an idiot; see below

hooley

9th May, 2011, 07:48 PM

Mine is gone the same as citygents. Have you definetly updated Bernado? Not saying you haven't or anything, maybe just double check.

bernado

9th May, 2011, 08:13 PM

Mine is gone the same as citygents. Have you definetly updated Bernado? Not saying you haven't or anything, maybe just double check.

Bah, it's a fair cop guv, just checked and it seems I'm a little late to the party - I'm on the April firmware!!
From the sound of it I think I'll stay put for a while, whilst I crawl back under my stone in shame!

hooley

9th May, 2011, 08:37 PM

Brave man to come out and admit it lol. I've only just upgraded mine. Come back out from that rock, tis easy mistake to make with all these new firmwares.

royboyz

11th May, 2011, 12:55 PM

How does one find a foreign Cline compatible with this box

Sent from my ZTE-BLADE using Tapatalk

trauma

11th May, 2011, 04:52 PM

How does one find a foreign Cline compatible with this box

Sent from my ZTE-BLADE using Tapatalk

You could always try asking a foreign payserver for one. :laugh:

grunter

14th May, 2011, 04:54 PM

hi i also had this problem and sorted by unplging the sat cable witch let me access the menu:stoned:

jjjbond

17th May, 2011, 07:05 PM

can anyone help with S9 and n**a channels ?
CCcam.prio or replace.list

fridgedoc

9th June, 2011, 04:11 PM

Hi guys

running a tm1000d with a motorised dish great receiver but not getting much apart from fta so really interested in this Openbox s9 hd, I have read through this thread but not sure what channels it clears, and what I need to do once I've got the box, so if some kind person could PM or email me and explain I would be most greatful

fridgedoc

kadnor

9th June, 2011, 04:33 PM

I Was told that one should look for a new firmware to upgrade OpenBox S9
from the store you bought it Or from Chinese supllier that sold the box to you.

I had to contact my supplier and eventutually got the proper software
compatible with my S 9. It is Ok now.

Hope this piece of info will help others also.

Hi,

Kindly send me the firmware upgrade website for this box.

regards

nazak47

21st June, 2011, 02:00 AM

Dreambox 500 s or Open BOX s9
im thinking of getting one of these but dont know which one. Also which one is easier to setup and configure for a novice person?
:stoned:

mast

21st June, 2011, 02:10 AM

Dreambox 500 s or Open BOX s9
im thinking of getting one of these but dont know which one. Also which one is easier to setup and configure for a novice person?
:stoned:

Hi

Well if you are a novice the easier box would be the openbox, the dreambox 500s is capable of lot more and requires bit more effort and also its not hd.

Oh and you should really make the first post in the newbie section and introduce yourself.

nazak47

21st June, 2011, 05:11 AM

Hi

Well if you are a novice the easier box would be the openbox, the dreambox 500s is capable of lot more and requires bit more effort and also its not hd.

Oh and you should really make the first post in the newbie section and introduce yourself.

I know sorry about that ive made one now also ive ordered a dreambox dm 500s cos they been out for longer and have a good rep. Anyway i should shut up now dont want to get done for spamming

sniazu

1st July, 2011, 08:49 PM

Hi there,

Openbox has some rebooting problem. Is there any solution for it?

mast

1st July, 2011, 09:24 PM

Hi there,

Openbox has some rebooting problem. Is there any solution for it?

Hi

Just answered in the thread you started, reply to that and Il try and help there.

shariifi

2nd July, 2011, 04:15 PM

Mine works fine. No issues with this latest firmware. Minor problems which are not important to me. I can say this box is better than DM500 HD which costs over ?300.

yvanx

3rd July, 2011, 01:29 PM

Hello
I'm new with S9 HD, and i have questions.
I share (intern in house) 2 cards (TVV and Telesat Be)
All is working, but i cannot see "chasse et p?che".
On my DB8000 (server) no problem...
What can it be?
Thanks
Yvan

christakis

5th July, 2011, 09:16 PM

Hello to everybody.
Is anybody can help me to fix my new openbox S9.
I'm new on cardsharing . I don't know how to make it work for cartsharing . Do i need to put new software via usb ? If yes were i can find it ?
Thanks

darcu5

6th July, 2011, 09:11 AM

centarus

7th July, 2011, 11:36 AM

Is there channels list for openbox S9 motor setting ??

like the Dreambox setting ??

hwyram

11th July, 2011, 04:47 AM

Loads of reading to be done 1st m8. The newest firmware is available in quite a few post also plenty of channel list knocking about. I am a complete novice yet I had mine up and running in a couple of hours; thanks to post on this site!! Plenty of googling to be done lol

is it possible you could put that info here so we can make it work instead of reinventing the wheel please ,, would be nice to have it in one place step by step please .. i am in toronto facing south and west ... what can i get on this unit as far as reception is concerned ...channels , what programming is required and what direction to face ......tks
:dontknow:

borderfox

16th July, 2011, 03:36 PM

Is it true that the latest firmware version fixes the 'rebooting' issue? If so, can anyone confirm what the new version is and provide a link?

Thanks in advance.

kesra

17th July, 2011, 05:56 PM

Is there something wrong with the tuner when it shows 44% as Signal intensity and 4-5 % quality no matter what you do with it..??

jonty2002

18th July, 2011, 11:08 AM

hi after upgrading my s9 i now find i cant load my c line with the usb stick, box says cant find file although it is there, also i can no longer find the key to input the : on the remote keypad anymore to input the c line manually, i cant remember having any problem before, any help appreciated , john:hmmmm:

Louriga

25th July, 2011, 07:19 PM

were can I find the latest firmware version for S9 HD clone. Does it fixes the 'rebooting' issue? If so, can anyone confirm what the new version is and provide a link?

Thanks

paljacob

6th August, 2011, 08:53 PM

Just got my first and new Openbox S9 HD PVR ordered from dealextreame.com.

I will try to ugrade my firmware from HDS2-10-10-20:0747CMT to the latest and greatest. As read on several posts, the box do not seem to allow me to use static IP settings (it reboots back to DHCP every time...), DHCP also seems to fail, I can't find it on the network. My laptop gets an IP strait away with the same cable.

This problem makes my cccam not find the servers...Hope the new firmware will solve the issue.

Any comments? Thanks

kabiela

6th August, 2011, 11:11 PM

I could never get that to work, I could see those X lines but sky de hd channels wont open for me either and they are fine on my Vu+.
X: { {1833} {1702} }
X: { {1811} {0100} }
X: { {0500} {0100} }
X: { {1817} {0622} }
X: { {1819} {1818} }

pizz86

8th August, 2011, 07:32 PM

it keeps rebooting on certioan channels do i need an update pls?

Reklaw

10th August, 2011, 09:08 PM

North & South America - LyngSat (http://www.lyngsat.com/america.html)

royboyz

10th August, 2011, 09:20 PM

it keeps rebooting on certioan channels do i need an update pls?
Delete them channels

van impe

4th September, 2011, 06:22 AM

This is the clone version

http://images.orkut.com/orkut/photos/OgAAAJutklo2Z1EWgOOMUlvYLFaeE5jJqxKtL6VgqgX4OsWZRH KyIsj34R6SLdC97riF5joZT0FhW2ksfdiHPO7urrQAm1T1UHqd mXKn3uOeSWeXlAca1WpRlFHI.jpg

And this the original

http://images.orkut.com/orkut/photos/OgAAAHVCQeSaGqhgbvbjIbddQTftY9ksJ8F6Ii8qLfyGEi_KMl JdsPbRb3rWxrf5b-iP7OLc4ix0vQY9u3YuD7QOe8YAm1T1UED89Dk7iLBYE1-WYIKik3KthDwx.jpg
(http://images.orkut.com/orkut/photos/OgAAAHVCQeSaGqhgbvbjIbddQTftY9ksJ8F6Ii8qLfyGEi_KMl JdsPbRb3rWxrf5b-iP7OLc4ix0vQY9u3YuD7QOe8YAm1T1UED89Dk7iLBYE1-WYIKik3KthDwx.jpg)
de erste afbeelding is het originele maar ni de cloon
maar de twede afbeeding is de cloon 100%

flower123

11th September, 2011, 03:22 AM

Mine works fine. No issues with this latest firmware. Minor problems which are not important to me. I can say this box is better than DM500 HD which costs over ?300.

Hi all

please tell me lf there a new softwere at this month Septemper ...?
here I attached the newest one ...
sorry I hav`nt find the attahing tool in the messaging box...! please why ...?, pls solve
this...,

I put it in mega upload...

http://hh7.net/Aug/26/hh7.net_13143339253.gif

MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=Q278DP4U)

MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=Q278DP4U)

http://hh7.net/Jul1/hh7.net_13097326061.gif

chao

best wishes

flower123

:party:

http://hh7.net/Nov/hh7net_12908108971.jpg

flower123

11th September, 2011, 03:27 AM

I'm sure my cable is ok!

Let's think, if my cable wasn't ok, how could i recover the box after a clone message?

I'm also able to dump the firmware evan when it's bricked.

Even using the pendrive with a 2010 version (when the 2011 is running), then it wont boot.

I get ON > boot > -- or just ON

But to recover, i have to put a 2010 fw version (it wont boot) and then come back to a 2011.

After a few reboots and normal use, i get again the clone message.

There must be a logical explanation for that.

The clone version of the S9 is called HD800 V8

How is your remote control??

Mine is like this

http://img690.imageshack.us/img690/5121/315828953937.jpg

Thankyou....

:party:

flower123

11th September, 2011, 03:30 AM

i just unpacked my S9 and replaced my DM500s with it, but there is no signal on the S9. I was using it to watch hotbird. No matter what i try theres still no signal. Can someone help me?

can anyone tell me the latest files for the openbox and how do i flash the files to the boxes

Thankyou

flower123

11th September, 2011, 03:32 AM

flower123

11th September, 2011, 03:34 AM

can anyone tell me the latest files for the openbox and how do i flash the files to the boxes

Thankyou...

:party:

flower123

11th September, 2011, 03:38 AM

Mine works fine. No issues with this latest firmware. Minor problems which are not important to me. I can say this box is better than DM500 HD which costs over ?300.

can anyone tell me the latest files for the openbox and how do i flash the files to the boxes

how to download the mentioned firmwere

:2in1:
Thankyou

eshaal

19th September, 2011, 03:28 AM

Yes i lived at Australia i need help for Shairing in Australia Can anyone helping to me

bobi85

21st September, 2011, 11:18 AM

my openbox s9 have a problem.. the display show ON all the time..any idea?

slava125

22nd September, 2011, 05:51 PM

Go to the Download Section. In the Openbox (at the bottom of the list) select, select Firmware. There you will find a list of downloads for the box.

kessy

26th September, 2011, 06:09 AM

hi
i am new to kaos.please help which box shows football channels and how much do i need to spend?#

nashpimp

26th September, 2011, 10:46 PM

can any help me on how to update firmware on Openbox s9 HD

nailacar

28th September, 2011, 12:00 PM

I have openbox S9HD PVR Twin tuner as original.Before I had openbox 7000PVR.It had many functions.But s9 has not some functions.Forexample Play list:copy:NO,cut:NO,merge:No.Also it cannot record:FROM THE EVENt.
What can I do?Is there anyone who helps me?Thanks

mojavaid36

28th September, 2011, 07:35 PM

Ordered my box the other day can't wait to fidddle. Use to be a dbox (Cable) guy but can't wait to dabble in the sky world....

mtv1

11th October, 2011, 09:48 PM

tools firmware Openbox S9/s10

This tool allows you to:
- analyze Openbox S9/S10 firmware file (*.abs)
- extract channel list to TP_PROG.dbs file (so you can extract list from .abs edited with SetEditHD100 tool)
- preview and extract background logo file (Back_logo.m2v)
- preview and extract boot logo file (Boot_logo.bin) (preview is not working for firmwares with non pure m2v format boot logo)
- replace your boot logo with extracted from another firmware (Boot_logo.bin)
- check block's CRC and fix it
- extract whole blocks and blocks's data only

thanks to MST

madbutcher

17th October, 2011, 08:01 PM

i have an s9, picture is crystal clear, easy 2 work with and im a retard, my box cost me 69quid on ebay, n ive a 1tb external hd 4 films i d.load straight on 2 it and watch on tv thanxs 2 da nu firmware. dnt get rid or ur box, get a nu server

GADOTOR

25th October, 2011, 05:09 PM

l want to try the openbox s10 hd and see it,s has.anyone with some details on it for me.thank you

GADOTOR

25th October, 2011, 05:11 PM

Any sites to download latest software for s10 hd.thank you

iofred

9th November, 2011, 07:59 PM

Hi, will this replace.list also work for OpenBox S10?

sharafatali66

11th December, 2011, 08:48 PM

I have been using one now for 8 months & is very stable & reliable.

ashiasim

12th December, 2011, 08:00 PM

it is a good box, had this for last 8 months working perfect n very easy to config..no problem at all..on ebay its for 59 pounds now

supaken

13th December, 2011, 03:22 PM

I'm looking for a good server without freeze has somebody any sugestion ?

sharafatali

17th December, 2011, 04:03 PM

It works fine. No problems at all. Had mine for over 6 months.

beerman2

13th January, 2012, 11:47 AM

hi i have a problem was hoping someone could assist. I accidentally replaced the back_logo.m2v and now when i press the Menu button I only get a black screen. Please advice if there is a way to replace it back. Thank you.

bobyxxx

13th January, 2012, 05:14 PM

i am newbie to this and have openbox s9.my box reboot every time can any one help me.

technodvl2

13th January, 2012, 08:26 PM

i am newbie to this and have openbox s9.my box reboot every time can any one help me.

if you installed new firmware

did you

factory default

my guess you did and you didn't

darcu5

13th January, 2012, 09:14 PM

darcu5

13th January, 2012, 09:19 PM

i am newbie to this and have openbox s9.my box reboot every time can any one help me.

If it isnt because you buggered up doing updates then it could be stuck on a channel causing it to reboot, try unplug ya sat cable from the back of the box and see if it starts up, if it does change channel and delete the offending one.

beerman2

14th January, 2012, 02:53 AM

you can use the stb over lan tool to replace it

unfortunately my firmware is not the 2011 therefore it does not allow me to connect. do you think a null modem cable and flashing back the hds2_dump.abs will help coz it looks like the back_logo.m2v is inside that firmware file. thanks for your help

darcu5

14th January, 2012, 07:24 AM

yeh it will go back on if you reflash the box

beerman2

14th January, 2012, 09:13 AM

yea works like a charm with a null modem cable, but took a long time to download the firmware, it is only 4mb, this take me back to the 14.4k modem days... hehe

darcu5

14th January, 2012, 09:44 AM

lol 4mb... i thought mine was bad. at least you have managed to sort it mate.

beerman2

14th January, 2012, 10:23 AM

yea thanks for the advice, since i have upgraded it to the latest firmware, i tried S10 firmware on it, the interface is nice but does not have cccam despite injecting to it numerous time, now that i have the cable and kinda understand how it works thought it was worth a play around before i roll back.

darcu5

14th January, 2012, 11:29 AM

there's plenty of s9 f/w out there, i still use the september one on mine.. works a treat so i'll leave it that way for now lol.

Also i think you can put the s9 f/w on the s10 but not s10 to s9.. so maybe thats why the cccam problem is there now

kevfran

14th January, 2012, 02:01 PM

my neighbour has got one it took me days to sort it out would not touch them with a shitty stick you can get a dream box 800hd for the same price

Shady

14th January, 2012, 02:31 PM

show me where u can get a dm 800 for ?60

bobyxxx

20th January, 2012, 06:08 AM

if you installed new firmware

did you

factory default

my guess you did and you didn't

if i factory default its lost all settings can u give me brief settings

for my box and wich firmware i use on it .thanks for your answer.

bobyxxx

4th February, 2012, 06:59 PM

If it isnt because you buggered up doing updates then it could be stuck on a channel causing it to reboot, try unplug ya sat cable from the back of the box and see if it starts up, if it does change channel and delete the offending one.

i donot upgrade it again and again.Today i update it by 5-01-2012 firmware.First i do factory default also but still same.Anyone help me?

bobyxxx

6th February, 2012, 04:24 PM

please help me?

Manic01

6th February, 2012, 04:38 PM

Start a new thread in main openbox forum stating exactly what your issues are and I will try and help.

chris1906

24th April, 2012, 04:30 PM

i try it but i get on my openbox-S9 screen that my box is clone version,can anyone say why???

Tim2k13

11th June, 2012, 10:04 AM

where do i download the latest firmware and upgrade my openbox s9

arian2012

26th June, 2012, 06:54 PM

Hey everyone,
I live in Stockholm and I have also just bought this Open box S9 HD PVR from ebay. Now I can only watch the FTA channels from astra 28.2 degree east. But I am a newby to flash this box and I need help.Been trying to download files from here but I was refused to get one..So Please advise me what should I do to get these files....Thanking you..

serious96

27th June, 2012, 10:11 AM

hi, i'm a new openbox s9 hd pvr new user,
there is something that make me confused, what is the different between openbox s9, or openbox s9 hd pvr, did the two are same or the openbox s9 hd pvr is a clone?

Shady

27th June, 2012, 10:14 AM

they both the same.....
whether its called one or the other is no guarantee of genuine box

kadnor

29th June, 2012, 12:39 PM

Start a new thread in main openbox forum stating exactly what your issues are and I will try and help.
How to check whether My OpenBox S 9 has got a linux,as I have heard some S 9 have got an embeddedimage that cannot be modified? Is that true ?
Thanks for your guidance.

Shady

29th June, 2012, 12:41 PM

ALL openboxes have got an embedded image

abuiesa

4th July, 2012, 08:41 AM

this will solve the problem of mgcamd?

Dec2dec

9th July, 2012, 10:53 PM

Hi All

Just wondering has anyone tried out the Openbox S9 HD PVR Linux Satellite Receiver saw them on ebay for ?125

?54 on amazon mate I just bought one

Dec2dec

9th July, 2012, 10:53 PM

Amazon ?54

JustinSuper

13th July, 2012, 04:49 PM

Yes, indeed...

JustinSuper

13th July, 2012, 04:50 PM

Could anyone give a helping hand???
I want the openbox s 10 HD PVR image driver...ASSAP

brasco03

13th July, 2012, 10:20 PM

Hi all
If I get an openbox s11 HD DM Satellite box PVR and plug it in to the sky satellite will it start getting channels all on its own or do I have to go through a process to get channels to show up on this first?

Thanks for your help cause I know nothing about the openbox other than I heard its supposed to be good I am in the uk by the way

cochin007

27th July, 2012, 11:55 PM

do a scan if it doesn show up...
Depends on ur reciever.
if it doent have 28.5 satellite in its list then u wont get.
else u can scan for channels

marrakech1

29th July, 2012, 11:24 AM

bonjour j'aimeraie savoir comment on pourrais cr?e notre propre reseau de sharing entre copains pour se partag? un carte officiel
merci

grumpy33

1st August, 2012, 11:39 AM

Why do these sites make picking up data so difficult. This always occurs when your attempting to resolve some difficulty or other and a further step is demanded!

mussaxp

5th August, 2012, 04:22 PM

I need openbox s10

captblack

15th August, 2012, 01:51 PM

hi guys

i bought one rec on ebay, for ?27 last week good deal
second hand hey ho.
lovely rec it works good. lol

blitz dj

18th August, 2012, 03:25 PM

hypersonic

20th August, 2012, 10:34 AM

hi hope some one can help me out.
i have a dm500v8 but the tuner has packed in so phoned to try and get a replacment box and the guy mentioned the openbox s10 sat receiver as he dont do the dm500 anymore,
are the s10's any good and do they run off a server like the 500's as i aint got a clue on these things??
thanx in advance

The openbox s10 will act as a client box and you can enter lines.
It will drive a dish using diseqc or USALS. It is not as versatile as the the dm and the EPG is pretty poor as (now & next) but overall a good client box for the price. I dont think the S10 has a scart.

blitz dj

23rd August, 2012, 12:18 PM

thanks for that hypersonic
whats the best box to get then that works the same way as the dm500 coz at the min im limited to what i can watch i.e i have 1 movie and 1 sports channel plus some low priced packaged virmin stuff lol.

missilesting

24th August, 2012, 06:29 PM

using the openbox s9 myself find it ok for the price i paid ?90 ....

opens16

7th November, 2012, 11:24 AM

Hello everybody!

I need a channel list fot openbox s16 HD PVR. All channels list are openbox s9

thankss :)

batuecas

25th November, 2012, 06:48 PM

its great for the price it was my first FTA easy to use

1Ajay

25th November, 2012, 08:50 PM

Iam using s9 set box n its fine just that i need to have more channels .guys
....any help.

Hadron

2nd December, 2012, 02:39 PM

Bought a cheap second hand S9 recently. My first step into Sat TV. I was surprised how easy it was to set up. Only drawback is the EPG. Still for the price, the Openboxes are great value.

Gulmunir

28th January, 2013, 11:50 AM

I have Reciever OpenBox s10 PVR and when I enter Biss keys in its CW option then it open scramble channel with working biss keys BUT If I two channel have same SID Then first enter Biss work while second enter not working while biss keys are working. For example 1st channel have Sid 000b and second too have SId 000b then 1st entered working while 2nd not ................. I too Enter it Ecm Pid & PMT pid its Caid but there is no solution if any body have its solution then Help me I am waiting to your Response????????

leart

2nd March, 2013, 11:28 AM

I miss you icons (Network Local Settings) I have reciever Openbox S9.
Can I change software for returned this icon.
Please Help meeee...!

jonnyj

5th April, 2013, 08:12 PM

Hi,
I have just unboxed a skybox f3. Other than updating the channel list are the any tips? ie should i update the firmware or leave it as the factory set.

Hadron

6th April, 2013, 09:29 AM

I miss you icons (Network Local Settings) I have reciever Openbox S9.
Can I change software for returned this icon.
Please Help meeee...!

Press the "menu" button. Then press either 6666 or 8888. The "network setup" icon should appear.

wabbit

11th August, 2013, 10:30 PM

hi, quick question. are these boxes any use. i have a dm500s and brothers have nbox and dm800hd. these boxes are linux, is the software similar or open source or is the s\w just released by the box developers. bought my bro an eagle box a couple of years back and it was useless. just wondering what ur opinion is on these, they seem great value. thanks