Bravo 1.2 16V ME73H4

[matekhr]

I need immo off file for the attached dump.
I already try the other attached dump, but car cannot accelerate more than 1200 revs.
Thanks in advance.
Best regards

[janeca]

Hi try this. See you!

[matekhr]

Hi try this. See you!

That's the same file I uploaded as "not good" in my first post.

Anyway, problem solved. :)

[eprommazza]

I need immo off file for the attached dump.
I already try the other attached dump, but car cannot accelerate more than 1200 revs.
Thanks in advance.
Best regards

if the car start and not have good rpm because you need adaptament throttle body..
useless to look for immo off
few words to the wise!

[matekhr]

I got original file with immo off and everything is working fine!! (immo lamp is ON, but that's normal...)

[kasim_izmir]

That's the same file I uploaded as "not good" in my first post.

Anyway, problem solved. :)
Hi friend
My idea clock procedure , Read ori dump before and save
write dump without immo
Then write ori dump to ecu
Ecu will be virgin
I was using more time this method

BR..Kasim

[eprommazza]

hi friend
yes i use same metod..kasim
but any cases when software of ecu is different or you use other ecu the car start and not have good rpm
it because need adaptament
with diagnosys