View Full Version : renault kango HOM7700104956 İMMO OFF HELP ME
tesla001
14th November, 2010, 01:46 PM
RENAULT KANGOO HOM7700104956 7700111206
YEAR 1998
UCH EPROM 93C46 BROKEN
2 KEYS LOST
ECU HOM7700104956 HEALTHY
i need UCH virgin eprom or ecu immo off solutions
kango 93c46 immobox_orj_broken_dump with zedbull not calculating and not creating new transtonder
error: wrong dump
How can I run this car?
help me please
markovojvodic
14th November, 2010, 01:49 PM
try with this
tesla001
14th November, 2010, 02:06 PM
try with this
sorry this does not happen
markovojvodic
14th November, 2010, 02:12 PM
dont understand
tesla001
14th November, 2010, 02:15 PM
what don't understand you?
tesla001
14th November, 2010, 07:28 PM
try with this
not work dear friend
tesla001
15th November, 2010, 08:22 AM
RENAULT KANGOO HOM7700104956 7700111206
YEAR 1998
UCH EPROM 93C46 BROKEN
2 KEYS LOST
ECU HOM7700104956 HEALTHY
i need UCH virgin eprom or ecu immo off solutions
kango 93c46 immobox_orj_broken_dump with zedbull not calculating and not creating new transtonder
error: wrong dump
How can I run this car?
help me please
bricolo
15th November, 2010, 09:00 AM
Hi
what injection pump have you on this car ?
can you post pump picture ?
tesla001
15th November, 2010, 09:18 AM
There are 3 cable on the sensor
adamgr
15th November, 2010, 09:34 AM
do you know the pin code?
can you read pin from key with zed?
if you can your dump can be repaired
dump 1 = pin code 4518
dump 2 = pin code 4441
HTH Adam
tesla001
15th November, 2010, 12:38 PM
do you know the pin code?
can you read pin from key with zed?
if you can your dump can be repaired
dump 1 = pin code 4518
dump 2 = pin code 4441
HTH Adam
thank you friend
adamgr
15th November, 2010, 08:45 PM
I take it one was the correct pin code then
What one was the correct pin ?
Adam
tesla001
17th November, 2010, 06:27 PM
dump 1 = pin code 4518
Kanaan
17th November, 2010, 07:06 PM
this kangoo can start without the ecu .
the immo is the key -> immo box -> diesel pump coded solenoid .
if you want to remove the immo you must take out the pin inside the coded solenoid and you are done .
there nothing to do with the ecu , the ecu is used only for forwared and backward the fuel amount for the diesel pump .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.