spider2004
3rd December, 2010, 10:24 PM
hi friends
i have daihatsu 4d key maker from china
i coud not add a new key for daihatsu charade chip is 4d 67
i follow this steps as written in manual
1. connect the programmer to the OBD port of the car
2. Insert the original key into the ignition lock, turn to "ON" position ,then remove this key after the theftproof light off
3. Third, insert the new key into the ignition lock, then turn to "ON" position, the new key will successful when the theftproof light off.
4. Now can remove the programmer from the OBD port.
i have cut the new key with a chip 4d 67
put device in obd port but when turned the original key on
theftproof light after a long time still flash Constantly
is this device Defective or chip is wrong or i have a mistake
pls help
advanced thanks
i have daihatsu 4d key maker from china
i coud not add a new key for daihatsu charade chip is 4d 67
i follow this steps as written in manual
1. connect the programmer to the OBD port of the car
2. Insert the original key into the ignition lock, turn to "ON" position ,then remove this key after the theftproof light off
3. Third, insert the new key into the ignition lock, then turn to "ON" position, the new key will successful when the theftproof light off.
4. Now can remove the programmer from the OBD port.
i have cut the new key with a chip 4d 67
put device in obd port but when turned the original key on
theftproof light after a long time still flash Constantly
is this device Defective or chip is wrong or i have a mistake
pls help
advanced thanks