PDA

View Full Version : Lt+ flash gone wrong i think?


DAVE466
8th December, 2010, 01:36 PM
Hi all i'm in the middle of updating my benq drive from lt to lt+ and it has came up with write write verify failed??

JungleFlasher 0.1.76 Beta (166)
Session Started Wed Dec 08 12:05:46 2010

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 10 I/O Ports.
Found 3 Com Ports.
Found 10 windows drives A: C: D: E: F: G: H: I: J: K:
Found 3 CD/DVD drives D: E: F:

Sending Vendor Intro to port 0xEC00
Status 0x51
Re-sending Vendor Intro:
.......
Serial flash found with Status 0x73

Sending Device ID request to port 0xEC00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0xEC00
Serial flash found with Status 0x73

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Benq Dump file saved to BENQ-OFW(lt+update).bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xE040 1BA361F6FB71C3D8E7641C29FA07C131
Firmware Osig: [PBDS VAD6038-64930C ]
Firmware is: iXtreme LT 1.2
Key database updated

Auto-Loading firmware file J:\Dave's Docs\computers\xbox\JungleFlasher.0.1.76.Beta\Jung leFlasher v0.1.76 Beta (166)\firmware\LTPlus-benq.bin
MD5 hash: ef3a351f05699a3ee0ad86d63375725e
Genuine LT plus v1.0
Inquiry string found
Identify string found
Drive key @ 0xE040 77777777777777777777777777777777
Firmware Osig: [PBDS VAD6038-64930C ]
Firmware is: LT-Plus
Spoofing Target
DVD Key copied to target
ID strings already match
Serial data copied from Source to Target


Loading MTK_Flash source file

Target f/w saved as: Benq_CFW(lt+update).bin

Getting Status from port 0xEC00
SPi flash found with Status 0x73

Sending Chip Erase to Port 0xEC00
Erasing:............
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
DAVE466
8th December, 2010, 01:37 PM
I have clicked on read and it says it is lt+

Getting Status from port 0xEC00
Serial flash found with Status 0x73

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Benq Dump file saved to BENQ-OFW2nd.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xE040 1BA361F6FB71C3D8E7641C29FA07C131
Firmware Osig: [PBDS VAD6038-64930C ]
Firmware is: LT-Plus
Key database updated


Loading MTK_Flash source file


I still have my stock and lt firmware .bin files.
cgscott
8th December, 2010, 01:42 PM
Dont autoload the .bin. Manually locate it and load it. Then spoof the key over. Then write.

Should do it no probs.
DAVE466
8th December, 2010, 01:45 PM
Dont autoload the .bin. Manually locate it and load it. Then spoof the key over. Then write.

Should do it no probs.

Thanks for quick reply, but its only the 2nd time i have done this and the 1st one went great but any chance you could tell me where to go from here.

Do i right click on the source, load firmware ie the lt+ firmware then click spoof?
DAVE466
8th December, 2010, 02:41 PM
Right things all gone tits up now. Left it as it was pc decided to cut off now xbox has e65 error. Think i may have stood on my keyboard which maybe why it went off. My pc won't recognise the drive now.
DAVE466
8th December, 2010, 04:44 PM
All done and sorted now thanks. I sussed it i put my stock firmware.bin file in the source and the lt+ in the target then clicked spoof, and followed guide their after.

Cheers
cgscott
8th December, 2010, 05:51 PM
Good to see you sorted :)
DAVE466
8th December, 2010, 06:02 PM
Good to see you sorted :)

Yes thankyou mate.

I also have stock liteon drive to flash is that just a straight forward flash using jungleflasher?
cgscott
8th December, 2010, 07:06 PM
You need a CK kit to flash that. Need to probe the r707 port.

Not so simple but the JF quide will show you step by step.
DAVE466
8th December, 2010, 07:32 PM
You need a CK kit to flash that. Need to probe the r707 port.

Not so simple but the JF quide will show you step by step.

Yeah just been looking through the guide. Don't really wanna be cutting/soldering anything so what would be the best but cheap (mid-range) kit to buy that doesn't involve soldering/cutting?
cgscott
8th December, 2010, 07:43 PM
What revision of Liteon is it? 7,8,9 series?
DAVE466
8th December, 2010, 08:12 PM
What revision of Liteon is it? 7,8,9 series?

Not sure mate gonna have to open it up again tomorrow night as i thought i was gonna have to cut/solder so put it back together. lol
cunny
9th December, 2010, 09:24 AM
Not sure mate gonna have to open it up again tomorrow night as i thought i was gonna have to cut/solder so put it back together. lol

It is possable to tell from the MFR date on back of the box, but always best to check on the drive itself.

73 series drives req probing of R707
8v1 (aug 2009 mixes revisions) explioted thro sata
8v2 (after aug 2009) require MRA hack
9 series drives require MRA hack.

All above can be done via the MRA hack, also aug is a mixed month so you could gget a 8 series v1 or v2.
DAVE466
14th December, 2010, 10:20 PM
It is possable to tell from the MFR date on back of the box, but always best to check on the drive itself.

73 series drives req probing of R707
8v1 (aug 2009 mixes revisions) explioted thro sata
8v2 (after aug 2009) require MRA hack
9 series drives require MRA hack.

All above can be done via the MRA hack, also aug is a mixed month so you could gget a 8 series v1 or v2.

05 oct 2009
cgscott
15th December, 2010, 02:19 PM
Most probably a 9 series drive then.
DAVE466
18th January, 2011, 01:52 PM
Most probably a 9 series drive then.

Sorry for late replies guys been hectic with work and all.

The drive is a 9 series, 93450c I understand that it will require the mra hack.

Can you point me in the right direction as to what the best kit is to buy and anything else that i will need buy. Many thanks.

Any of these any good?

http://www.dealextreme.com/details.dx/sku.33936

http://www.dealextreme.com/details.dx/sku.39274

http://www.dealextreme.com/details.dx/sku.44946
cunny
18th January, 2011, 02:25 PM
CK3 Kit + Clip/Switch/Probe V2

Also there is a new usb device comin out in the next few weeks to remove driver/software issues

MrModchips The Number 1 Name In Console Modifications, Accessories & Spare Parts (http://mrmodchips.co.uk/catalog/index.php?cPath=44_58&osCsid=90a87a0763ed651b140dc9a2e9b0e178)
DAVE466
18th January, 2011, 02:47 PM
CK3 Kit + Clip/Switch/Probe V2

Also there is a new usb device comin out in the next few weeks to remove driver/software issues

MrModchips The Number 1 Name In Console Modifications, Accessories & Spare Parts (http://mrmodchips.co.uk/catalog/index.php?cPath=44_58&osCsid=90a87a0763ed651b140dc9a2e9b0e178)

So am i best of waiting to get the new usb device?

If not is this what i need?

http://mrmodchips.co.uk/catalog/product_info.php?cPath=44_58&products_id=807&osCsid=90a87a0763ed651b140dc9a2e9b0e178

http://mrmodchips.co.uk/catalog/product_info.php?cPath=44_58&products_id=786&osCsid=90a87a0763ed651b140dc9a2e9b0e178

http://mrmodchips.co.uk/catalog/product_info.php?products_id=802&osCsid=90a87a0763ed651b140dc9a2e9b0e178
cunny
18th January, 2011, 05:56 PM
You want the following

CK3 Kit
A Probe V2, switch or clip
Compatable sata chipset or the new usbpro or maximus versions.
Soldering iron or conductive glue